Categories

WGSW-52040

box_WGSW-52040v2
WGSW-52040
L2+ 48-Port 10/100/1000Base-T + 4-Port 1000X SFP Managed Gigabit Switch
3icon_L3_RIP_Routing 2icon_L3-Static-Routing 0icon_mstp 1icon_IPv6-Management

  • Telecom-class Gigabit Solution for Enterprise Backbone and Data Center Networking
    PLANET WGSW-52040 is a Layer 2+ Managed Gigabit Switch that provides high-density performance and also supports Layer 3 static routing and RIP (Routing Information Protocol). With 104Gbps switching fabric, the WGSW-52040 can handle extremely large amounts of data in a secure topology linking to an enterprise backbone or high capacity servers. The powerful WRR (Weighted Round Robin) and Network Security features make the WGSW-52040 perform effective data traffic control for ISP and Enterprise VoIP, video streaming and multicast applications.
    Layer 3 Routing Support
    The WGSW-52040 enables the administrator to conveniently boost network efficiency by configuring Layer 3 static routing manually or the RIP (Routing Information Protocol) settings automatically. The RIP can employ the hop count as a routing metric and prevent routing loops by implementing a limit on the number of hops allowed in a path from the source to a destination. The maximum number of hops allowed for the RIP is 15.
    Abundant IPv6 Support
    The WGSW-52040 provides IPv6 management and enterprise level secure features such as SSH, ACL, WRRand RADIUS authentication besides support of the IPv4 protocol. The WGSW-52040 thus helps the enterprises to step in the IPv6 era with the lowest investment. In addition, you don’t need to replace the network facilities when the IPv6 FTTx edge network is built.
    High Performance
    The WGSW-52040 provides 48 10/100/1000Mbps Gigabit Ethernet ports with 4 additional Gigabit SFP slots. It boasts a high-performance switch architecture that is capable of providing non-blocking switch fabric and wire-speed throughput as high as 104Gbps, which greatly simplifies the tasks of upgrading the LAN for catering to increasing bandwidth demands.
     

    Robust Layer 2 Features
    The WGSW-52040 can be programmed for basic switch management functions such as port speed configuration, port aggregation, VLAN, Spanning Tree protocol, WRR, bandwidth control and IGMP snooping. The WGSW-52040 provides 802.1Q tagged VLAN, Q-in-Q, voice VLAN and GVRP protocol. The VLAN groups allowed to be on the WGSW-52040 will be maximally up to 256. By supporting port aggregation, the WGSW-52040 allows the operation of a high-speed trunk combined with multiple ports. It enables up to 128 groups of maximum 8 ports for trunking.

    Excellent Traffic Control
    The WGSW-52040 is loaded with powerful traffic management and WRR features to enhance services offered by telecoms. The WRR functionalities include wire-speed Layer 4 traffic classifiers and bandwidth limitation which are particularly useful for multi-tenant unit, multi-business unit, Telco, or network service applications. It also empowers the enterprises to take full advantage of the limited network resources and guarantees the best performance at VoIP and video conferencing transmission.
    Powerful Security
    The WGSW-52040 supports ACL policies comprehensively. The traffic can be classified by source/destination IP addresses, source/destination MAC addresses, IP protocols, TCP/UDP, IP precedence, time ranges and ToS. Moreover, various policies can be conducted to forward the traffic. The WGSW-52040 also provides IEEE 802.1x port based access authentication, which can be deployed with RADIUS, to ensure the port level security and block illegal users.
    Efficient Management
    The WGSW-52040 supports IP stacking function that helps network managers to easily configure up to 24 switches in the same series via one single IP address instead of connecting and setting each unit one by one. For efficient management, the WGSW-52040 Managed Gigabit Switch is equipped with console, Web and SNMP management interfaces. With its built-in Web-based management interface, the WGSW-52040 offers an easy-to-use, platform-independent management and configuration facility. The WGSW-52040 supports standard Simple Network Management Protocol (SNMP) and can be managed via any standard-based management software. For text-based management, the WGSW-52040 can be accessed via Telnet and the console port. Moreover, the WGSW-52040 offers secure remote management by supporting SSH connection which encrypts the packet content at each session.
    Flexibility and Extension Solution
    The four mini-GBIC slots built in the WGSW-52040 are compatible with 1000BASE-X and WDM SFP (Small Form-factor Pluggable) fiber-optic modules. The distance can be extended from 550 meters (multi-mode fiber) up to above 10/50/70/120 kilometers (single-mode fiber or WDM fiber). They are well suited for applications within the enterprise data centers and distributions.
    Ordering Information
    WGSW-52040 L2+ 48-Port 10/100/1000BASE-T + 4-Port 1000BASE-X SFP Managed Gigabit Switch


  • Server Farm Switch
    The WGSW-52040 provides up to 52 Gigabit Ethernet ports for Enterprises and Network servers. It is ideal to be used as a server farm switch connecting to servers. With its port trunking function, an 8GB fat pipe is provided for connecting to the backbone if required.
     

    Enterprise Security and QoS Edge Switch
    With the IEEE 802.1x network access authentication, the WGSW-52040 provides the MAC / IP / Protocol Access Control list and Port Security functions which can limit the number of MAC addresses to be passed through one specific port. The IGMP snooping and QoS features in the WGSW-52040 improve the network efficiency and protect the network clients.

    Ordering Information
    WGSW-52040 L2+ 48-Port 10/100/1000BASE-T + 4-Port 1000BASE-X SFP Managed Gigabit Switch

     


  • Hardware Specifications
    Hardware Version 2
    Copper Ports 48 10/ 100/1000BASE-T RJ45 Auto-MDI/MDI-X ports
    SFP / mini-GBIC Slots 4 1000BASE-X SFP interfaces
    Console 1 x RJ45-to-RS-232 serial port (9600, 8, N, 1)
    Switch Architecture Store-and-forward
    Switch Fabric 104Gbps / non-blocking
    Switch Throughput 77.38Mpps
    Address Table 16K MAC address table with auto learning function
    Shared Data Buffer 1.5Mbytes
    Flow Control Back pressure for half-duplex
    IEEE 802.3x pause frame for full-duplex
    Jumbo Frame 9K bytes
    LED System:
    PWR, SYS
    Ports:
    TP Port:10/100/1000 Link/Act
    SFP slot: Link/Act
    Dimensions (W x D x H) 442 x 280 x 44 mm, 1U height
    Weight 3702g
    Power Consumption 38 watts / 129 BTU (maximum)
    Power Requirements AC 100~240V, 50/60Hz
    Management Function
    System Configuration Console, Telnet, SSH, Web Browser, SNMP v1, v2c and v3
    Management Supports both IPv4 and IPv6 addressing
    Supports the user IP security inspection for IPv4 / IPv6 SNMP
    Supports MIB and TRAP
    Supports IPv4 / IPv6 FTP/TFTP
    Supports IPv4 / IPv6 NTP
    Supports RMOM 1, 2, 3, 9 four group
    Supports the RADIUS authentication for IPv4 / IPv6 telnet user name and password
    Supports IPv4 / IPv6 SSH
    The right configuration for users to adopt RADIUS server’s shell management
    Supports CLI, console, Telnet
    Supports SNMPv1 / v2c / v3
    Supports Security IP safety net management function: avoid unlawful landing at nonrestrictive area
    Supports Syslog server for IPv4 and IPv6
    Supports TACACS+
    Layer 3 Function
    Static Route Supports maximum 128 static routes
    Supports maximum 15 hobs for RIP
    Layer 2 Function
    Port Configuration Port disable/enable
    Auto-negotiation 10/100/1000Mbps full and half duplex mode selection
    Flow control disable / enable
    Bandwidth control on each port
    Port loopback detect
    Port Status Display each port’s speed duplex mode, link status, flow control status, and
    auto negotiation status
    VLAN 802.1Q tagged based VLAN, up to 256 VLAN groups
    802.1ad Q-in-Q (VLAN stacking)
    GVRP for VLAN management
    Private VLAN Edge (PVE) supported
    Protocol-based VLAN
    MAC-based VLAN
    IP subnet VLAN
    Bandwidth Control TX / RX / both
    Link Aggregation IEEE 802.3ad LACP / static trunk
    Supports 128 groups of 8-port trunk
    QoS 8 priority queues on all switch ports
    Supports strict priority and Weighted Round Robin (WRR) CoS policies
    Traffic classification:
    – IEEE 802.1p CoS / ToS
    – IPv4 / IPv6 DSCP
    – Port-based WRR
    Multicast IGMP v1/ v2 / v3 snooping
    Querier mode support
    MLDv1 / v2, MLD v1 / v2 snooping
    Querier mode support
    Multicast VLAN Register (MVR)
    Access Control List Supports Standard and Expanded ACL
    IP-based ACL / MAC-based ACL
    Time-based ACL
    Up to 1K entries
    Bandwidth Control At least 64Kbps step
    Security Supports MAC + port binding
    IPv4 / IPv6 + MAC + port binding
    IPv4 / IPv6 + port binding
    Supports MAC filter
    ARP Scanning Prevention
    Authentication IEEE 802.1x port-based network access control
    AAA Authentication: TACACS+ and IPv4/IPv6 over RADIUS
    SNMP MIBs RFC 1213 MIB-II
    RFC 1215 Internet Engineering Task Force
    RFC 1271 RMON
    RFC 1354 IP-Forwarding MIB
    RFC 1493 Bridge MIB
    RFC 1643 Ether-like MIB
    RFC 1907 SNMP v2
    RFC 2011 IP/ICMP MIB
    RFC 2012 TCP MIB
    RFC 2013 UDP MIB
    RFC 2096 IP forward MIB
    RFC 2233 if MIB
    RFC 2452 TCP6 MIB
    RFC 2454 UDP6 MIB
    RFC 2465 IPv6 MIB
    RFC 2466 ICMP6 MIB
    RFC 2573 SNMPV3 notify
    RFC 2574 SNMPV3 vacm
    RFC 2674 Bridge MIB Extensions (IEEE 802.1Q MIB)
    RFC 2674 Bridge MIB Extensions (IEEE 802.1P MIB)
    Standard Conformance
    Regulation Compliance FCC Part 15 Class A, CE
    Standards Compliance IEEE 802.3 10BASE-T
    IEEE 802.3u 100BASE-TX/100BASE-FX
    IEEE 802.3z Gigabit 1000BASE-SX/LX
    IEEE 802.3ab Gigabit 1000BASE-T
    IEEE 802.3x flow control and back pressure
    IEEE 802.3ad port trunk with LACP
    IEEE 802.1D Spanning Tree Protocol
    IEEE 802.1w Rapid Spanning Tree Protocol
    IEEE 802.1s Multiple Spanning Tree Protocol
    IEEE 802.1p class of service
    IEEE 802.1Q VLAN tagging
    IEEE 802.1X port authentication network control
    IEEE 802.1ab LLDP
    RFC 768 UDP
    RFC 793 TFTP
    RFC 791 IP
    RFC 792 ICMP
    RFC 2068 HTTP
    RFC 1112 IGMP version 1
    RFC 2236 IGMP version 2
    RFC 3376 IGMP version 3
    RFC 2710 MLD version 1
    FRC 3810 MLD version 2
    Environment
    Operating Temperature: 0 ~ 50 degrees C
    Relative Humidity: 5 ~ 90% (non-condensing)
    Storage Temperature: -10 ~ 70 degrees C
    Relative Humidity: 5 ~ 90% (non-condensing)
    Ordering Information
    WGSW-52040 L2+ 48-Port 10/100/1000BASE-T + 4-Port 1000BASE-X SFP Managed Gigabit Switch

Facebooktwittergoogle_pluspinterestlinkedinyoutube

WGSW-24040HP / WGSW-24040HP4

box_WGSW-24040HP
WGSW-24040HP / WGSW-24040HP4
24-Port 10/100/1000Mbps 802.3at PoE+ Managed Switch with 4 Shared SFP Ports
8icon_802.3at_802.3af_End-span 2icon_30W_PoE 1icon_IPv6-Management 2icon_802.1Q_VLAN 0icon_mstp 4icon_SSL-SSH

  • The WGSW-24040HP series is the latest generation of PLANET Managed Gigabit PoE Switches featuring PLANET intelligent PoE functions to improve the availability of critical business applications. The series provides IPv6/IPv4 management and built-in L2/L4 Gigabit Switching engine along with 24 10/100/1000Base-T ports featuring 30-watt 802.3at PoE+ and 4 Gigabit SFP slots. With total power budget up to 220W and 440W for different kinds of PoE applications, the series provides quick, safe and cost-effective Power over Ethernet network solutions to security IP surveillance for small business and enterprises.
     

    Centralized Power Management for Gigabit Ethernet PoE Networking
    To fulfill the needs of higher power required PoE network applications with gigabit speed transmission, the WGSW-24040HP series features IEEE 802.3at power over Ethernet plus(PoE+) that combines up to 30 watts of power output and data per port over one CAT 5E/6 Ethernet cable. It is designed specifically to meet the demand of higher power consuming network PD (powered devices) such as IR, PTZ, Speed Dome cameras or even Box type IP cameras with built in fan and heater. Compliant with both 802.3at and 802.3af, the series allows more flexibility in power requirement for a variety of PDs.

     

    Built-in Unique PoE Functions for Powered Devices Management
    As a managed PoE Switch for surveillance, wireless and VoIP network, the WGSW-24040HP series features special PoE Management functions:
    ■ PD ALIVE Check
    ■ Scheduled Power Recycling
    ■ SMTP/SNMP Trap Event Alert
    ■ PoE Schedule

    Intelligent Powered Device Alive-Check
    The WGSW-24040HP series can be configured to monitor connected PD (Powered Device) status in real-time via ping action. Once the PD stops working and responding, the WGSW-24040HP series will resume the PoE port power and bring the PD back to work. It will greatly enhance the network reliability through the PoE port resetting the PD’s power source and reducing administrator management burden.

     

    Power Recycling Schedule
    The WGSW-24040HP series allows each of the connected PoE IP cameras to reboot at a specified time each week. Therefore, it will reduce the chance of IP camera crash resulting from buffer overflow.

    SMTP/SNMP Trap Event Alert
    Though most NVR or camera management software offers SMTP email alert function, the WGSW-24040HPs further provides event alert function to help to diagnose the abnormal device owing to the breakdown of the network connection, loss of PoE power or the rebooting response by PD Alice Check process.

    PoE Schedule for Energy Saving
    Under the trend of energy saving worldwide and contributing to environmental protection, the WGSW-24040HP series can effectively control the power supply besides its capability of giving high watts power. The “PoE schedule” function helps you to enable or disable PoE power feeding for each PoE port during specified time intervals and it is a powerful function to help SMB or enterprises save power and money.

     

    Cost-effective IPv6 Managed Gigabit Switch Solution for SMB
    Faced with the increasingly large number of IP cameras and Wireless APs being installed and deployed in all kinds of applications, more and more network equipment comes with IPv6 protocol for next generation networking. The WGSW-24040HP series supports both the original IPv4 network structure as well as the new IPv6 protocol. With easy and friendly management interfaces and plenty of management functions included, the WGSW-24040HP series is the best choice for SMB, and IP Surveillance and Wireless service providers to connect with IPv6 network.

    Efficient Management
    For efficient management, the WGSW-24040HP managed switch series is equipped with console, web and SNMP management interfaces. With the built-in web-based management interface, the WGSW-24040HP series offers an easy-to-use, platform independent management and configuration facility. The WGSW-24040HP series supports SNMP and it can be managed via any based on standard of SNMP v1 and v2 management software. For text-based management mode, the WGSW-24040HP can be accessed via Telnet and the console port. Moreover, the WGSW-24040HP series offers remote secure management by supporting SSH, SSL and SNMPv3 connection which can be encrypted the packet content at each session.

    Robust Layer2 Features
    The WGSW-24040HP series can be programmed for advanced switch management function, such as dynamic port link aggregation, Q-in-Q VLAN, private VLAN, rapid spanning tree protocol, layer2 to layer4 QoS, bandwidth control and IGMP/MLD snooping. The WGSW-24040HP series provides 802.1Q tagged VLAN and the VLAN groups allowed will be maximally up to 255. The WGSW-24040HP not only allows the operation of a high-speed trunk combining multiple ports, but also supports connection fail-over.

    Powerful Security
    The WGSW-24040HP series offers comprehensive layer2 to layer4 access control list (ACL) for enforcing security to the edge. It can be used to restrict to network access by denying packets based on source and destination IP address, TCP/UDP port number or defined typical network applications. Its protection mechanism also comprises 802.1x Port-based and MAC-based user and device authentication. With the private VLAN function, communication between edge ports can be prevented to ensure user privacy. The WGSW-24040HP series also provides DHCP Snooping, IP Source Guard and Dynamic ARP Inspection functions to prevent IP snooping from attack and discard ARP packets with invalid MAC address. The network administrator can now construct highly secured corporate networks with considerably less time and effort than before.

    Flexible and Extendable Solution
    The four mini-GBIC slots built in the WGSW-24040HP series support dual speed that 100Base-FX and 1000Base-SX/LX SFP (Small Form-factor Pluggable) fiber-optic modules. Now the administrator can flexibly choose the suitable SFP transceiver according to not only the transmission distance, but also the transmission speed required. The distance can be extended from 550 meters to 2km (Multi-Mode fiber) up to above 10/20/30/40/50/70/120 kilometers (Single-Mode fiber or WDM fiber). They are well suited for applications within the enterprise data centers and distributions.

    Ordering Information
    WGSW-24040HP 24-Port 10/100/1000Mbps 802.3at PoE+ Managed Switch with 4 Shared SFP Ports
    WGSW-24040HP4 24-Port 10/100/1000Mbps 802.3at PoE+ Managed Switch with 4 Shared SFP Ports (440watts)


  • Perfect Integration Solution for IP PoE Camera and NVR System
    The WGSW-24040HP series brings an ideal, secure surveillance system at a lower total cost. It provides 24 10/100/1000Mbps 802.3at PoE ports with 4-port Gigabit TP/SFP Combo interfaces, offering sufficient PoE power for a maximum of 24 IEEE 802.3af PoE IP cameras at the same time.

    With 4-port Gigabit TP/SFP Combo interfaces, the WGSW-24040HP series supports connection to three 8-Channel NVR systems to receive stream from 20 cameras and also to backbone switch from an uplink port, and then access to control center. With its high performance switch architecture, the recorded video files from the 20 IEEE 802.3af PoE IP camera devices can be saved in the NVR systems, which can be controlled and monitored both in the local LAN and the remote site via Internet.

     

    IP Office Department / Workgroup PoE Switch
    As the business expands, the additional telephones required could be installed at less cost via the implementation of PoE IP telephony system than that of the traditional circuit wiring telephony system. The WGSW-24040HP series helps enterprises to efficiently create an integrated data, voice, and powered VoIP network. PLANET IEEE 802.3af compliant IP phones can be installed without any power cable because it can be powered via the standard Ethernet cable from the connected WGSW-24040HP series. With the WGSW-24040HP series, IP telephony deployment becomes more reliable and cost effective, which helps enterprises save tremendous cost when upgrading from the traditional telephony system to IP telephony communications infrastructure.

     

    IP Office Backbone PoE Switch
    Providing up to 24 PoE, in-line power interfaces or providing up to 20 PoE, in-line power interfaces and 4 gigabit TP/SFP combo interfaces, the WGSW-24040HP series can easily build a power centrally controlled IP phone system, IP camera system, or wireless AP group for the enterprises. For instance, IP cameras or wireless APs can be easily installed in the company for surveillance demands or building a wireless roaming environment in the office. Without the power socket limitation, the WGSW-24040HP series makes the deployment of IP cameras or wireless LAN AP easier and more efficient. The 4 gigabit TP/SFP combo interfaces in the WGSW-24040HP series also offers flexible Gigabit TP or fiber connection for uplink to public server groups.

    Ordering Information
    WGSW-24040HP 24-Port 10/100/1000Mbps 802.3at PoE+ Managed Switch with 4 Shared SFP Ports
    WGSW-24040HP4 24-Port 10/100/1000Mbps 802.3at PoE+ Managed Switch with 4 Shared SFP Ports (440watts)


  • Hardware Specifications
    Copper Ports 24 10/100/1000Base-T RJ-45 Auto-MDI/MDI-X ports
    10/100/1000Mbps / SFP Combo Interfaces 4 10/100/1000Mbps TP and SFP shared combo interfaces, SFP(Mini-GBIC) supports 100/1000Mbps dual mode DDM, shared with Port-21 to Port-24
    Console 1 x RS-232 DB9 serial port (115200, 8, N, 1)
    Switch Architecture Store-and-Forward
    Switch Fabric 48Gbps/non-blocking
    Throughput 35.7Mpps@64Bytes
    Address Table 8K entries, automatic source address learning and ageing
    Share Data Buffer 4 megabits
    Flow Control IEEE 802.3x pause frame for full-duplex
    Back pressure for half-duplex
    Jumbo Frame 9K bytes
    Reset Button < 5 sec: system reboot
    > 5 sec: factory default
    LED System:
    Power (Green)
    WGSW-24040HP Alert:
    FAN1 (Green), FAN2 (Green), PWR (Green)
    WGSW-24040HP4 Alert:
    FAN1 (Green), FAN2 (Green), FAN3 (Green), PWR (Green)
    PoE Ethernet Interfaces (Port 1 to Port 24):
    LNK/ACT (10/100/1000Mbps, Green), PoE In-Use (Orange)
    100/1000Mbps SFP Combo Interfaces (Port 21 to Port 24):
    1000 (LNK/ACT, Green), 100 (LNK/ACT, Orange)
    Power Requirements WGSW-24040HP: 100~240V AC, 50/60Hz, 4A
    WGSW-24040HP4: 100~240V AC, 50/60Hz, 6A
    Power Consumption (Full Load) WGSW-24040HP: 262 watts
    WGSW-24040HP4: 482 watts
    ESD Protection 6KV DC
    Power over Ethernet
    PoE Standard IEEE 802.3at/802.3af Power over Ethernet/PSE
    PoE Power Supply Type End-Span
    PoE Power Output Per Port 56V DC, 590mA
    Max. 30.8 watts
    Power Pin Assignment 1/2(+), 3/6(-)
    PoE Power Budget WGSW-24040HP: 220 watts max.
    WGSW-24040HP4: 440 watts max.
    PoE Ability ■ PD @ 7 watts
    WGSW-24040HP: 24 units
    WGSW-24040HP4: 24 units
    ■ PD @ 15.4 watts
    WGSW-24040HP: 14 units
    WGSW-24040HP4: 24 units
    ■ PD @ 30.8 watts
    WGSW-24040HP: 7 units
    WGSW-24040HP4: 14 units
    Layer2 Management Function
    Basic Management Interfaces Console, Telnet, Web Browser, SNMP v1, v2c
    Secure Management Interfaces SSH, SSL, SNMP v3
    Port Configuration Port disable/enable
    Auto-Negotiation 10/100/1000Mbps full and half duplex mode selection
    Flow Control disable/enable
    Port Status Display each port’s speed duplex mode, link status, Flow control status, Auto negotiation status, trunk status
    Port Mirroring TX/RX/Both
    Many-to-1 monitor
    VLAN 802.1Q Tagged based VLAN, up to 255 VLAN groups
    Q-in-Q tunneling
    Private VLAN Edge (PVE)
    MAC-based VLAN
    Protocol-based VLAN
    Voice VLAN
    MVR (Multicast VLAN Registration)
    Up to 255 VLAN groups, out of 4094 VLAN IDs
    Link Aggregation IEEE 802.3ad LACP/Static Trunk
    Supports 10 groups of 16-Port trunk
    QoS Traffic classification based, Strict priority and WRR
    8-Level priority for switching
    ■ Port Number
    ■ 802.1p priority
    ■ 802.1Q VLAN tag
    ■ DSCP/TOS field in IP Packet
    IGMP Snooping IGMP (v1/v2/v3) Snooping, up to 255 multicast Groups
    IGMP Querier mode support
    MLD Snooping MLD (v1/v2) Snooping, up to 255 multicast Groups
    MLD Querier mode support
    Access Control List IP-based ACL / MAC-based ACL
    Up to 256 entries
    Bandwidth Control Per port bandwidth control
    Ingress: 500Kb~80Mbps
    Egress: 64Kb~80Mbps
    SNMP MIBs RFC-1213 MIB-II
    IF-MIB
    RFC-1493 Bridge MIB
    RFC-1643 Ethernet MIB
    RFC-2863 Interface MIB
    RFC-2665 Ether-Like MIB
    RFC-2819 RMON MIB (Group 1, 2, 3 and 9)
    RFC-2737 Entity MIB
    RFC-2618 RADIUS Client MIB
    RFC-3411 SNMP-Frameworks-MIB
    IEEE 802.1X PAE
    LLDP
    MAU-MIB
    PoE-Ethernet MIB
    Standards Conformance
    Regulation Compliance FCC Part 15 Class A, CE
    Standards Compliance IEEE 802.3 10Base-T
    IEEE 802.3u 100Base-TX/100Base-FX
    IEEE 802.3z 1000Base-SX/LX
    IEEE 802.3ab 1000Base-T
    IEEE 802.3x Flow Control and Back pressure
    IEEE 802.3ad Port trunk with LACP
    IEEE 802.1D Spanning tree protocol
    IEEE 802.1w Rapid spanning tree protocol
    IEEE 802.1s Multiple spanning tree protocol
    IEEE 802.1p Class of service
    IEEE 802.1Q VLAN Tagging
    IEEE 802.1x Port Authentication Network Control
    IEEE 802.1ab LLDP
    IEEE 802.3af Power over Ethernet
    IEEE 802.3at Power over Ethernet PLUS
    RFC 768 UDP
    RFC 793 TFTP
    RFC 791 IP
    RFC 792 ICMP
    RFC 2068 HTTP
    RFC 1112 IGMP version 1
    RFC 2236 IGMP version 2
    RFC 3376 IGMP version 3
    RFC 2710 MLD version 1
    FRC 3810 MLD version 2
    Ordering Information
    WGSW-24040HP 24-Port 10/100/1000Mbps 802.3at PoE+ Managed Switch with 4 Shared SFP Ports
    WGSW-24040HP4 24-Port 10/100/1000Mbps 802.3at PoE+ Managed Switch with 4 Shared SFP Ports (440watts)

Facebooktwittergoogle_pluspinterestlinkedinyoutube

WGSW-24040 / WGSW-24040R

box_WGSW-24040v2
WGSW-24040 / WGSW-24040R
L2+ 20-Port 10/100/1000T + 4-Port Gigabit TP/SFP Combo Managed Switch
1icon_IPv6-Management 2icon_QinQ-VLAN 4icon_MLD_Snooping 2icon_IPv6IPv4_ACLQoS 3icon_IP-Source-Guard 2icon_L3-Static-Routing

  • Cost-effective IPv6 Managed Gigabit Switch Solution for Enterprises
    PLANET WGSW-24040 series is a Layer 2+ managed Gigabit Switch that features 24-Port 10/100/1000BASE-T + 4-Port Shared 100/1000Base-X SFP and supports static Layer 3 routing for enterprise-level network. The abundant L2 / L4 switching engine offered by the WGSW-24040 series performs effective data traffic control for enterprises and VoIP service providers, video streaming, and multicast applications. Providing user-friendly but advanced IPv6 / IPv4 management interfaces, it is well suited for backbone and workgroup network applications by providing affordability, high performance, and stable transmission quality.
     

    Solution for IPv6 Networking
    By supporting IPv6 / IPv4 dual stack and plenty of management functions with easy and friendly management interfaces, the WGSW-24040 series is the best choice for video, voice and wireless service providers to connect with the IPv6 network. It also helps SMBs to step in the IPv6 era with the lowest investment but is not necessary to replace the network facilities while the ISP constructs the IPv6 FTTx edge network.

     

    Layer 3 IPv4 and IPv6 Software VLAN Routing for Secure and Flexible Management
    To help customers stay on top of their businesses, the WGSW-24040 series not only provides ultra high transmission performance and excellent layer 2 technologies, but also IPv4/IPv6 software VLAN routing feature which allows to cross over different VLANs and different IP addresses for the purpose of having a highly secured, flexible management and simpler networking application.

    Robust Layer2 Features
    The WGSW-24040 series can be programmed for advanced switch management function, such as dynamic port link aggregation, Q-in-Q VLAN, Multiple Spanning Tree Protocol (MSTP), Layer 2/4 QoS, bandwidth control and IGMP/MLD snooping. Via the link aggregation of supporting ports, the WGSW-24040 series allows the operation of a high-speed trunk to combine with multiple ports. It enables a maximum of 12 trunk groups with 8 ports per group, and supports connection fail-over as well.

     

    Powerful Security
    The WGSW-24040 series offers comprehensive layer2 to layer4 access control list (ACL) for enforcing security to the edge. It can be used to restrict to network access by denying packets based on source and destination IP address, TCP/UDP port number or defined typical network applications. Its protection mechanism also comprises 802.1x port-based and MAC-based user and device authentication.

    Enhanced Security and Traffic Control
    The WGSW-24040 series also provides DHCP snooping, IP source guard and dynamic ARP Inspection functions to prevent IP snooping from attack and discard ARP packets with invalid MAC address. The network administrator can now construct highly-secured corporate networks with considerably less time and effort than before.

    User-friendly Secure Management
    For efficient management, the WGSW-24040 managed switch series is equipped with console, web and SNMP management interfaces. With the built-in web-based management interface, the WGSW-24040 series offers an easy-to-use, platform independent management and configuration facility. For reducing product learning time, the WGSW-24040 series offers Cisco-like command via Telnet or console port and customer doesn’t need to learn new command from these switches. The WGSW-24040 series supports SNMP and it can be managed via any management software based on standard of SNMP v1 and v2 protocol. Moreover, the WGSW-24040 series offers remote secure management by supporting SSH, SSL and SNMPv3 connection which can encrypt the packet content at each session.

    Flexible and Extendable Solution
    The four mini-GBIC SFP slots built in the WGSW-24040 series support dual speed as it features 100BASE-FX and 1000BASE-SX/LX SFP (Small Form-factor Pluggable) fiber-optic modules, meaning the administrator can flexibly choose the suitable SFP transceiver according to not only the transmission distance, but also the transmission speed required. The distance can be extended from 550 meters to 2km (multi-mode fiber) and up to above 10/20/30/40/50/70/120 kilometers (single-mode fiber or WDM fiber). They are well suited for applications within the enterprise data centers and distributions.

    Intelligent SFP Diagnosis Mechanism
    The WGSW-24040 series supports SFP-DDM (Digital Diagnostic Monitor) function that greatly helps network administrator to easily monitor real-time parameters of the SFP transceivers, such as optical output power, optical input power, temperature, laser bias current, and transceiver supply voltage.
    Redundant AC / DC Power Supply to Ensure Continuous Operation
    The WGSW-24040R is particularly equipped with one 100~240V AC power supply unit and one 36~60V DC power supply unit to provide an enhanced reliable and scalable redundant power supply installation. The continuous power system is specifically designed to fulfill the demands of high tech facilities requiring the highest power integrity. With the 36~60V DC power supply, the WGSW-24040R is able to act as a telecom level device that can be located in the electronic room

    Ordering Information
    WGSW-24040 L2+ 20-Port 10/100/1000T + 4-Port Gigabit TP/SFP Combo Managed Switch
    WGSW-24040R L2+ 20-Port 10/100/1000T + 4-Port Gigabit TP/SFP Combo Managed Switch


  • High Performance Backbone / Server Farm Switch
    Gigabit Ethernet supported equipment has become the fundamental unit of enterprises and network servers. With up to 48 Gigabits per second of non-blocking switch fabric, the WGSW-24040 series can easily provide the high bandwidth required from now on. It can easily provide a local high bandwidth Gigabit Ethernet network for backbone of enterprises or telecoms. With its port trunking function, a 16 GB fat pipe is provided to connect to the backbone if required. It is ideal to be used as a server farm switch connecting to servers. The WGSW-24040 series can offer the uplink to the edge network through Gigabit Ethernet LX / SX SFP modules with the four SFP ports.
     

    Department / Edge Security and QoS Switch
    The WGSW-24040 series connects up to 24 high-speed workstations in the Ethernet environment, in which its two SFP mini-GBIC interfaces are uplinked to a department backbone. Moreover, the Switch provides 16 Gigabit per second switch fabric and high bandwidth for backbone connection. The WGSW-24040 series improves the network efficiency and safeguards the network clients with the powerful features:
    ■ IPv6 / IPv4 management
    ■ Layer 2 to Layer 4 security
    ■ QoS
    ■ 802.1x Port-based and MAC-based network access authentication security
    ■ Multicast IGMP snooping

    The advanced functionality of the WGSW-24040 series eliminates the traditional issues associated with the use of Ethernet. Users can be separated with advanced VLAN functionality to enhance security. It makes the WGSW-24040 series one of the best and most cost-effective switch solutions for SMBs.
    cost-effective switch solutions for SMB.

     

    FTTX / MAN Application
    The WGSW-24040 series applies the double tag VLAN (Q-in-Q) technology to providing low cost and easy operation for service providers carrying traffic for multiple customers across their networks. It features SNMPv3 and RMON Groups. The SNMPv3 security structure consists of security models, with each model having its own security levels. With four dual-speed SFP slots built in, the deployment distance of the WGSW-24040 series can be extended from 550 meters (Multi-mode fiber) up to above 10/50/70/120 kilometers (Single-mode fiber), which provides a high-performance edge service for FTTx solutions. To build a network solution of FTTH (Fiber to the Home) or FTTC (Fiber to the Curb) for ISPs, and FTTB (Fiber to the Building) for enterprises, the various distances of SFP (small-form factor) and Bidi (WDM) transceivers are optional for customers’ choices. For security and various applications, the 24 Gigabit ports of the WGSW-24040 series can be configured with VLAN settings and connect to different units, offices, flowers, houses and departments.

     

    FTTX / MAN Application
    The WGSW-24040 series applies the double tag VLAN (Q-in-Q) to providing low cost and easy operation for service providers carrying traffic for multiple customers across their networks. For security and various applications, the 24 Gigabit ports of the WGSW-24040 series can be configured with VLAN settings and connect to different units, offices, flowers, houses and departments. It features SNMPv3 and RMON Groups. The SNMPv3 security structure consists of security models, with each model having its own security levels. To build a network solution of FTTH (Fiber to the Home) or FTTC (Fiber to the Curb) for ISPs, and FTTB (Fiber to the Building) for enterprises, the various distances of SFP and Bidi (WDM) transceivers are optional for customers.

    Ordering Information
    WGSW-24040 L2+ 20-Port 10/100/1000T + 4-Port Gigabit TP/SFP Combo Managed Switch
    WGSW-24040R L2+ 20-Port 10/100/1000T + 4-Port Gigabit TP/SFP Combo Managed Switch


  • Hardware Specifications
    Hardware Version Version 2
    Copper Ports 24 10/100/1000BASE-T RJ45 Auto-MDI/MDI-X ports
    SFP/mini-GBIC Slots 4 1000BASE-SX/LX/BX SFP interfaces, shared with port-21 to port-24
    Supports 100/1000Mbps dual mode and DDM
    Console Port 1 x RS-232 DB9 serial port (115200, 8, N, 1)
    Switch Architecture Store-and-Forward
    Switch Fabric 48Gbps / non-blocking
    Switch Throughput 35.7Mpps@64Bytes
    Address Table 8K entries, automatic source address learning and ageing
    Shared Data Buffer 1392 kilobytes
    ESD Protection 6KV
    Flow Control IEEE 802.3x pause frame for full-duplex
    Back pressure for half-duplex
    Jumbo Frame 9Kbytes
    Reset Button < 5 seconds: System reboot
    > 5 seconds: Factory default
    Dimensions (W x D x H) 440 x 200 x 44.5mm, 1U high
    Weight WGSW-24040: 2740g
    WGSW-24040R: 2850g
    LED Power, fan alert
    10/100/1000 Link / Act per RJ45 port
    100/1000 Link / Act per SFP port
    Power Consumption Max. 21.0 watts / 71.652 BTU
    Power Requirements WGSW-24040 / WGSW-24040R: 100~240V AC, 50/60Hz
    WGSW-24040R: -48V DC @ 0.6A, DC voltage range: 30 ~ 60V
    Layer 2 function
    Port Configuration Port disable / enable
    Auto-negotiation 10/100/1000Mbps full and half duplex mode selection
    Flow control disable / enable
    Port Status Display each port’s speed duplex mode, link status, flow control status, auto-negotiation status, trunk status
    Port Mirroring TX / RX / Both
    Many-to-1 monitor
    VLAN 802.1Q tagged based VLAN
    Q-in-Q tunneling
    Private VLAN Edge (PVE)
    MAC-based VLAN
    Protocol-based VLAN
    Voice VLAN
    IP Subnet-based VLAN
    MVR (Multicast VLAN Registration)
    Up to 255 VLAN groups, out of 4094 VLAN IDs
    Link Aggregation IEEE 802.3ad LACP / static trunk
    12 groups of 8-Port trunk supported
    Spanning Tree Protocol STP, IEEE 802.1D Spanning Tree Protocol
    RSTP, IEEE 802.1w Rapid Spanning Tree Protocol
    MSTP, IEEE 802.1s Multiple Spanning Tree Protocol
    QoS Traffic classification based, strict priority and WRR
    8-Level priority for switching
    – Port Number
    – 802.1p priority
    – 802.1Q VLAN tag
    – DSCP/ToS field in IP packet
    IGMP Snooping IGMP (v1/v2/v3) snooping, up to 255 multicast groups
    IGMP querier mode support
    MLD Snooping MLD (v1/v2) Snooping, up to 255 multicast groups
    MLD Querier mode support
    Access Control List IP-based ACL / MAC-based ACL
    Up to 256 entries
    Bandwidth Control Per port bandwidth control
    Ingress: 100Kbps~1000Mbps
    Egress: 100Kbps~1000Mbps
    Layer 3 Functions
    IP Interfaces Max. 8 VLAN interfaces
    Routing Table Max. 32 routing entries
    Routing Protocols IPv4 software static routing
    IPv6 software static routing
    Management
    Basic Management Interfaces Console / Telnet / Web browser / SNMP v1, v2c
    Secure Management Interfaces SSH, SSL, SNMP v3
    SNMP MIBs RFC-1213 MIB-II
    RFC-1493 Bridge MIB
    RFC-1643 Ethernet MIB
    RFC-2863 Interface MIB
    RFC-2665 Ether-Like MIB
    RFC-2819 RMON MIB (Group 1, 2, 3 and 9)
    RFC-2737 Entity MIB
    RFC-2618 RADIUS Client MIB
    RFC-2863 IF-MIB
    RFC-2933 IGMP-STD-MIB
    RFC-3411 SNMP-Frameworks-MIB
    RFC-4292 IP Forward MIB
    RFC-4293 IP MIB
    RFC-4836 MAU-MIB
    IEEE 802.1X PAE
    LLDP
    Standards Conformance
    Regulation Compliance FCC Part 15 Class A, CE
    Standards Compliance IEEE 802.3 10BASE-T
    IEEE 802.3u 100BASE-TX/100BASE-FX
    IEEE 802.3z Gigabit SX/LX
    IEEE 802.3ab Gigabit 1000T
    IEEE 802.3x Flow Control and Back pressure
    IEEE 802.3ad Port trunk with LACP
    IEEE 802.1D Spanning Tree protocol
    IEEE 802.1w Rapid Spanning Tree protocol
    IEEE 802.1s Multiple Spanning Tree protocol
    IEEE 802.1p Class of service
    IEEE 802.1Q VLAN Tagging
    IEEE 802.1X Port Authentication Network Control
    IEEE 802.1ab LLDP
    RFC 768 UDP
    RFC 793 TFTP
    RFC 791 IP
    RFC 792 ICMP
    RFC 2068 HTTP
    RFC 1112 IGMP version 1
    RFC 2236 IGMP version 2
    RFC 3376 IGMP version 3
    RFC 2710 MLD version 1
    FRC 3810 MLD version 2
    Environment
    Operating Temperature: 0 ~ 50 degrees C
    Relative Humidity: 20 ~ 95% (non-condensing)
    Storage Temperature: -20 ~ 70 degrees C
    Relative Humidity: 20 ~ 95% (non-condensing)
    Ordering Information
    WGSW-24040 L2+ 20-Port 10/100/1000T + 4-Port Gigabit TP/SFP Combo Managed Switch
    WGSW-24040R L2+ 20-Port 10/100/1000T + 4-Port Gigabit TP/SFP Combo Managed Switch

Facebooktwittergoogle_pluspinterestlinkedinyoutube

WGSW-20160HP

box_WGSW-20160HP (1)
WGSW-20160HP
16-Port 10/100/1000Mbps 802.3at PoE + 4-Port Gigabit TP / SFP Combo Managed Switch
8icon_802.3at_802.3af_End-span 2icon_30W_PoE 1icon_IPv6-Management 2icon_802.1Q_VLAN 0icon_mstp 4icon_SSL-SSH

  • Ideal Solution for Secure IP Surveillance Infrastructure
    Particularly designed for the growing popular IP Surveillance applications, PLANET Gigabit 802.3at PoE Managed Switch WGSW-20160HP is positioned as a Surveillance Switch with central management of remote power control and IP camera monitoring. The WGSW-20160HP provides built-in L2/L4 switching engine and intelligent PoE functions along with 16 10/100/1000Base-T ports featuring 30-watts 802.3at PoE in RJ-45 copper interfaces and 4 extra Gigabit TP/SFP combo interfaces supporting high speed transmission of surveillance images and videos.
    Perfect Integration Solution for IP PoE Camera and NVR System
    Differentiated from general IT industrial PoE Switch which usually contains 12 or 24 PoE ports, the WGSW-20160HP provides 16 802.3at PoE+ ports for catering to medium to large scale of IP Surveillance networks at a lower total cost. With 40Gbps high performance switch architecture and 230-watts PoE power budget by the WGSW-20160HP, the recorded video files from 16 PoE IP Cameras can be powered by the WGSW-20160HP and saved in the 8 / 16 / 32-channel NVR systems or surveillance software to perform comprehensive security monitoring. For instance, one WGSW-20160HP can combine with one 16-Channel NVR and 16 PoE IP cameras as a kit for the administrators to centrally and efficiently manage the surveillance system in the local LAN and the remote site via Internet.
    Flexible and Extendable Uplink Solution
    The WGSW-20160HP provides 4 extra Gigabit TP/SFP combo interfaces supporting 10/100/1000Base-T RJ-45 copper to connect with surveillance network devices such as NVR, Video Streaming Server or NAS to facilitate surveillance management. Or through these dual-speed fiber SFP slots, it can also connect with the100Base-FX / 1000Base-SX/LX SFP (Small Form-factor Pluggable) fiber transceiver to uplink to backbone switch and monitor center in long distance. The distance can be extended from 550 meters to 2km (multi-mode fiber) up to above 10/20/30/40/50/70/120 kilometers (single-mode fiber or WDM fiber). They are well suited for applications within the enterprise data centers and distributions.

    Centralized Power Management for Gigabit Ethernet PoE Networking
    To fulfill the needs of higher power required PoE network applications with Gigabit speed transmission, the WGSW-20160HP features high performance Gigabit IEEE 802.3af PoE (Up to 15.4 watts) and IEEE 802.3at PoE+ (Up to 30 watts) on all ports. It perfectly satisfies the PoE IP camera which needs high power consumption such as IR, PTZ, speed dome cameras or even box type IP cameras with built-in fan and heater.

    The PoE capabilities provided also help to reduce deployment costs for network devices as a result of freeing from restrictions of power outlet locations. Power and data switching are integrated into one unit, delivered over a single cable and managed centrally. It thus eliminates cost for additional AC wiring and reduces installation time.

    Built-in Unique PoE Functions for Surveillance Management
    As a managed PoE Switch for surveillance network, the WGSW-20160HP features four special PoE Management functions:
    ■ PD ALIVE Check
    ■ Scheduled Power Recycling
    ■ SMTP/SNMP Trap Event Alert
    ■ PoE Schedule

    Intelligent Powered Device Alive Check
    The WGSW-20160HP can be configured to monitor connected PD (Powered Device) status in real-time via ping action. Once the PD stops working and is without response, the WGSW-20160HP will resume the PoE port power and bring the PD back to work. It will greatly enhance the network reliability through the PoE port resetting the PD’s power source and reduce administrator management burden.

    Scheduled Power Recycling
    The WGSW-20160HP allows each of the connected PoE IP cameras to reboot in a specific time each week. Therefore, it will reduce the chance of IP camera crash resulting from buffer overflow.

    SMTP/SNMP Trap Event Alert
    Though most NVR or camera management software offers SMTP email alert function, the WGSW-20160HP further provides event alert function to help to diagnose the abnormal device owing to whether or not there is a break of the network connection, loss of PoE power or the rebooting response by PD Alice Check process.

    PoE Schedule for Energy Saving
    Besides being used as an IP Surveillance, the WGSW-20160HP is certainly applicable to construct any PoE network including VoIP and Wireless LAN. Under the trend of energy saving worldwide and contributing to the environmental protection on the earth, the WGSW-20160HP can effectively control the power supply besides its capability of giving high watts power. The “PoE schedule” function helps you to enable or disable PoE power feeding for each PoE port during specified time intervals and it is a powerful function to help SMB or Enterprise save power and money.

    Cost-Effective PoE Switch Solution for IPv6 Networking
    Faced with the increasingly large number of IP cameras and Wireless APs being installed and deployed in all kinds of applications, more and more network equipment starts to support IPv6 protocol for next generation networking. To fulfill the demand of IPv6, the WGSW-20160HP supports both IPv4 and IPv6 management functions. It can work with original IPv4 network structure and also support the new IPv6 network structure. With easy and friendly management interfaces and plenty of management functions included, the WGSW-20160HP is the best choice for IP Surveillance and Wireless service providers to connect with IPv6 network.

    Efficient Management
    For efficient management, the WGSW-20160HP Managed Switch is equipped with console, WEB and SNMP management interfaces. With the built-in Web-based management interface, the WGSW-20160HP offers an easy-to-use, platform-independent management and configuration facility. The WGSW-20160HP supports standard Simple Network Management Protocol (SNMP) and can be managed via any standard-based management software. For text-based management, the WGSW-20160HP can be accessed via Telnet and the console port. Moreover, the WGSW-20160HP offers secure remote management by supporting SSH, SSL and SNMPv3 connection which encrypt the packet content at each session.

    Robust Layer 2 Features
    The WGSW-20160HP can be programmed for advanced switch management functions such as dynamic Port link aggregation, Q-in-Q VLAN, private VLAN, Multiple Spanning Tree protocol(MSTP), Layer 2 to Layer 4 QoS, bandwidth control and IGMP / MLD Snooping. The WGSW-20160HP provides 802.1Q Tagged VLAN, and the VLAN groups allowed will be maximally up to 255. Via aggregation of supporting ports, the WGSW-20160HP allows the operation of a high-speed trunk combining multiple ports and supports fail-over as well.

    Powerful Security
    The WGSW-20160HP offers comprehensive Layer 2 to Layer 4 Access Control List (ACL) for enforcing security to the edge. It can be used to restrict network access by denying packets based on source and destination IP address, TCP/UDP ports or defined typical network applications. Its protection mechanism also comprises 802.1x Port-based and MAC-based user and device authentication. With the private VLAN function, communication between edge ports can be prevented to ensure user privacy. The WGSW-20160HP also provides DHCP Snooping, IP Source Guard and Dynamic ARP Inspection functions to prevent IP snooping from attack and discarding ARP packets with invalid MAC address. The network administrators can now construct highly secured corporate networks with considerably less time and effort than before.

    Ordering Information
    WGSW-20160HP 16-Port 10/100/1000Mbps 802.3at PoE + 4-Port Gigabit TP / SFP Combo Managed Switch


  • High Power IP Surveillance and Wireless LAN Service in Public Transportation
    Providing up to 16 PoE, in-line power interfaces and 4 Gigabit TP / SFP combo interfaces, the WGSW-20160HP can easily build a power centrally controlled IP Camera system for the enterprises. It can work with 8 / 16 / 32-Channel NVR and surveillance software to perform comprehensive security monitoring. For instance, one WGSW-20160HP can combine with one 16-Channel NVR or with 2 8-Channel NVRs; that is, each of its PoE port can link to a specific PoE IP camera for the administrators centrally and efficiently manage the surveillance system in one site. The 4 Gigabit TP / SFP combo interfaces in the WGSW-20160HP also provide flexible Gigabit TP or fiber connection for uplink to public server groups.
    IP Office Department / Workgroup PoE Switch
    Applying the capability of IEEE 802.3at Power over Ethernet standard, the WGSW-20160HP can directly connect with any IEEE 802.3at end-node like PTZ (Pan, Tilt & Zoom) network cameras, Speed Dome IP cameras, color touch- screen Voice over IP (VoIP) telephones, and multi- channel wireless LAN access points. Besides the wired Internet network, the WGSW-20160HP enables the wireless LAN deployment more efficiently for the transportation stations to bring high-speed Internet services in wide areas. By adopting PoE Wireless LAN structure, the transportation authority gains benefits from less cost while providing better Internet services in wider areas for the travelers.
    Ordering Information
    WGSW-20160HP 16-Port 10/100/1000Mbps 802.3at PoE + 4-Port Gigabit TP / SFP Combo Managed Switch


  • Hardware Specification
    Copper Ports 16 10/ 100/1000Base-T RJ-45 Auto-MDI/MDI-X ports
    10/100/1000Mbps / SFP Combo Interfaces 4 10/100/1000Mbps TP and SFP shared combo interfaces, SFP(Mini-GBIC) supports 100/1000Mbps Dual mode, shared with Port-17 to Port-20
    Console 1 x RS-232 DB9 serial port (115200, 8, N, 1)
    Switch Architecture Store-and-Forward
    Switch Fabric 40Gbps / non-blocking
    Throughput 29.7Mpps@64Bytes
    Address Table 8K entries, automatic source address learning and ageing
    Share Data Buffer 4 megabits
    Flow Control IEEE 802.3x Pause Frame for Full-Duplex
    Back pressure for Half-Duplex
    Jumbo Frame 9Kbytes
    Reset Button < 5 sec: System reboot
    > 5 sec: Factory Default
    Dimension (W x D x H) 440 x 300 x 44.5 mm, 1U high
    Weight 4.1kg
    LED System:
    Power (Green), SYS (System, Green)
    Alert:
    FAN1 (Green), FAN2 (Green)
    PoE Ethernet Interfaces (Port 1 to Port 16):
    LNK/ACT (10/100/1000Mbps, Green), PoE In-Use (Orange)
    10/100/1000Base-T Combo Ports (Port 17 to port 20):
    1000 (LNK/ACT, Green), 10/100 (LNK/ACT, Orange)
    100/1000Mbps SFP Combo Interfaces (Port 17 to Port 20):
    1000 (LNK/ACT, Green), 100 (LNK/ACT, Orange)
    Power Requirement 100~240V AC, 50/60Hz, 2A
    Power Consumption Max 22 Watts / 75BTU
    ESD Protection 6KV DC
    Power over Ethernet
    PoE Standard IEEE 802.3af / 802.3at PoE / PSE
    PoE Power Supply Type End-Span
    PoE Power Output Per Port 56V DC
    Max. 30.8 Watts
    Power Pin Assignment 1/2(+), 3/6(-)
    PoE Power Budget 230 Watts Max.
    PoE Ability Number of PD @ 7 Watts: 16
    Number of PD @ 15.4 Watts: 14
    Number of PD @ 30.8 Watts: 7
    Layer 2 Management Function
    Basic Management Interfaces Console, Telnet, Web Browser, SNMP v1, v2c
    Secure Management Interfaces SSH, SSL, SNMP v3
    Port Configuration Port disable / enable
    Auto-Negotiation 10/100/1000Mbps full and half duplex mode selection
    Flow Control disable / enable
    Port Status Display each port’s speed duplex mode, link status, flow control status, auto negotiation status, trunk status
    Port Mirroring TX / RX / Both
    Many-to-1 monitor
    VLAN 802.1Q Tagged based VLAN, up to 255 VLAN groups
    Q-in-Q tunneling
    Private VLAN Edge (PVE)
    MAC-based VLAN
    Protocol-based VLAN
    Voice VLAN
    MVR (Multicast VLAN Registration)
    Up to 255 VLAN groups, out of 4094 VLAN IDs
    Link Aggregation IEEE 802.3ad LACP / static trunk
    Supports 10 groups of 16-port trunk support
    QoS Traffic classification based, strict priority and WRR
    8-Level priority for switching

        • Port Number
        • 802.1p priority
        • 802.1Q VLAN tag
        • DSCP/TOS field in IP Packet
    IGMP Snooping IGMP (v1/v2/v3) Snooping, up to 255 multicast groups
    IGMP querier mode support
    MLD Snooping MLD (v1/v2) Snooping, up to 255 multicast groups
    MLD querier mode support
    Access Control List IP-based ACL / MAC-based ACL
    Up to 256 entries
    Bandwidth Control Per port bandwidth control
    Ingress: 500Kb~80Mbps
    Egress: 64Kb~80Mbps
    SNMP MIBs RFC-1213 MIB-II
    IF-MIB
    RFC-1493 Bridge MIB
    RFC-1643 Ethernet MIB
    RFC-2863 Interface MIB
    RFC-2665 Ether-Like MIB
    RFC-2819 RMON MIB (Group 1, 2, 3 and 9)
    RFC-2737 Entity MIB
    RFC-2618 RADIUS Client MIB
    RFC-2933 IGMP-STD-MIB
    RFC-3411 SNMP-Frameworks-MIB
    IEEE 802.1X PAE
    LLDP
    MAU-MIB
    Standards Conformance
    Regulation Compliance FCC Part 15 Class A, CE
    Standards Compliance IEEE 802.3 10Base-T
    IEEE 802.3u 100Base-TX/100Base-FX
    IEEE 802.3z 1000Base-SX/LX
    IEEE 802.3ab 1000Base-T
    IEEE 802.3x Flow Control and Back pressure
    IEEE 802.3ad Port trunk with LACP
    IEEE 802.1D Spanning tree protocol
    IEEE 802.1w Rapid spanning tree protocol
    IEEE 802.1s Multiple spanning tree protocol
    IEEE 802.1p Class of service
    IEEE 802.1Q VLAN Tagging
    IEEE 802.1x Port Authentication Network Control
    IEEE 802.1ab LLDP
    IEEE 802.3af Power over Ethernet
    IEEE 802.3at Power over Ethernet PLUS
    RFC 768 UDP
    RFC 793 TFTP
    RFC 791 IP
    RFC 792 ICMP
    RFC 2068 HTTP
    RFC 1112 IGMP version 1
    RFC 2236 IGMP version 2
    RFC 3376 IGMP version 3
    RFC 2710 MLD version 1
    FRC 3810 MLD version 2
    Environment
    Operating
    Temperature: 0 ~ 50 degrees C
    Relative Humidity: 5 ~ 95% (non-condensing)
    Storage
    Temperature: -10 ~ 70 degrees C
    Relative Humidity: 5 ~ 95% (non-condensing)
    Ordering Information
    WGSW-20160HP 16-Port 10/100/1000Mbps 802.3at PoE + 4-Port Gigabit TP / SFP Combo Managed Switch

Facebooktwittergoogle_pluspinterestlinkedinyoutube

WGSD-10020HP

box_WGSD-10020HP
WGSD-10020HP
L2+ 8-Port 10/100/1000T + 2-Port 100/1000X SFP Managed 802.3at PoE Switch
2icon_30W_PoE 1icon_PoE-Schedule 1icon_IPv6-Management 2icon_802.1Q_VLAN 2icon_1GMP_Snooping

  • Centralized Power Management for Gigabit Ethernet Networking
    To fulfill the demand of higher power required PoE network applications with Gigabit speed transmission, PLANET has launched a new desktop 13-inch size Gigabit Managed Switch, WGSD-10020HP, which features high-performance Gigabit IEEE 802.3at PoE Plus on all copper ports. A maximum of 30 watts is available on each Gigabit copper port of the WGSD-10020HP for powering each PD, with a maximum PoE delivery of 150 watts for all PoE ports in order to satisfy the increasing needs of power consumption by PDs. Providing Gigabit throughput and high power supply, the WGSD-10020HP optimizes the installation and power management of network devices such as 11n wireless access points (APs) with Gigabit PoE LAN port, security PTZ / Speed Dome network video camera, color touch-screen PoE video phones, thin-clients and more.
     

    Built-in Unique PoE Functions for Powered Devices Management
    As a managed PoE Switch for surveillance, wireless and VoIP network, the WGSD-10020HP features special PoE management functions:
    ■ PD Alive Check
    ■ Scheduled Power Recycling
    ■ SMTP/SNMP Trap Event Alert
    ■ PoE Schedule

    Intelligent Powered Device Alive Check
    The WGSD-10020HP PoE Gigabit Managed Switch can be configured to monitor connected PD (Powered Device) status in real-time via ping action. Once the PD stops working and responding, the WGSD-10020HP will recycle the PoE port power and bring the PD back to work. It will greatly enhance the network reliability through the PoE port resetting the PD’s power source and reduce administrator management burden.

     

    PoE Schedule for Energy Saving
    Under the trend of energy saving worldwide and contributing to environment protection on the Earth, the WGSD-10020HP can effectively control the power supply along with its capability of giving high watts power over Ethernet. The “PoE schedule” function enables you to activate or inactivate PoE power feeding for each PoE port during specified time intervals, which is a powerful function to help SMBs or enterprises save power and money.

     

    Solution for IPv6 Networking
    By supporting IPv6 / IPv4 dual stack and plenty of management functions with easy and friendly management interfaces, the WGSD-10020HP is the best choice for IP surveillance, VoIP and wireless service providers to connect with the IPv6 network. It also helps SMBs to step in the IPv6 era with the lowest investment but not necessary to replace the network facilities while the ISP constructs the IPv6 FTTx edge network.

    IPv4 and IPv6 Software VLAN Routing for Secure and Flexible Management
    To help customers stay on top of their businesses, the WGSD-10020HP not only provides ultra high transmission performance and excellent layer 2 technologies, but also offers IPv4/IPv6 Software VLAN routing feature which allows to cross over different VLANs and different IP addresses for the purpose of having a highly secured, flexible management and simpler networking application.

    Robust Layer 2 Features
    The WGSD-10020HP can be programmed for advanced switch management function, such as dynamic port link aggregation, Q-in-Q VLAN, Multiple Spanning Tree Protocol (MSTP), Layer 2/4 QoS, bandwidth control andIGMP/MLD snooping. The WGSD-10020HP allows the operation of a high-speed trunk combining multiple ports.It enables you to configure up to 5 ports as a trunk group (a maximum of 5 trunk groups are available), and supports connection fail-over as well.

     

    Powerful Security
    The WGSD-10020HP offers comprehensive layer 2 to layer 4 access control list (ACL) for enforcing security to the edge. It can be used to restrict to network access by denying packets based on source and destination IP address, TCP/UDP port number or defined typical network applications. Its protection mechanism also comprises 802.1x port-based and MAC-based user and device authentication.

    Enhanced Security and Traffic Control
    The WGSD-10020HP also provides DHCP Snooping, IP Source Guard and Dynamic ARP Inspection functions to prevent IP snooping from attack and discard ARP packets with invalid MAC address. The network administrator can now construct highly-secured corporate networks with considerably less time and effort than before.

    User-friendly Secure Management
    For efficient management, the WGSD-10020HP managed switch series is equipped with console, Web and SNMP management interfaces. With the built-in web-based management interface, the WGSD-10020HP offers an easy-to-use, platform independent management and configuration facility. The WGSD-10020HP supports SNMP and it can be managed via any management software based on standard of SNMP v1 and v2 protocol. For reducing product learning time, the WGSD-10020HP offers Cisco-like command via Telnet or console port and customer doesn’t need to learn new command from these switches. Moreover, the WGSD-10020HP offers remote secure management by supporting SSH, SSL and SNMPv3 connection which can be encrypted the packet content at each session.

    Flexible and Extendable Solution
    The two mini-GBIC SFP slots built in the WGSD-10020HP support dual speed as it features 100Base-FX and 1000Base-SX/LX SFP (Small Form-factor Pluggable) fiber-optic modules, meaning the administrator can flexibly choose the suitable SFP transceiver according to not only the transmission distance, but also the transmission speed required. The distance can be extended from 550 meters to 2km (multi-mode fiber) and up to above 10/20/30/40/50/70/120 kilometers (single-mode fiber or WDM fiber). They are well suited for applications within the enterprise data centers and distributions.

    Intelligent SFP Diagnosis Mechanism
    The WGSD-10020HP supports SFP-DDM (Digital Diagnostic Monitor) function that greatly helps network administrator to easily monitor real-time parameters of the SFP transceivers, such as optical output power, optical input power, temperature, laser bias current, and transceiver supply voltage.

    Ordering Information
    WGSD-10020HP L2+ 8-Port 10/100/1000T + 2 100/1000X SFP Managed 802.3at PoE Switch


  • High Power IP Surveillance and Wireless LAN Service in Public Transportation
    Applying the capability of IEEE 802.3at Power over Ethernet standard, the WGSD-10020HP can directly connect with any IEEE 802.3at end-node like PTZ (Pan, Tilt & Zoom) network cameras, speed dome IP cameras, color touch-screen Voice over IP (VoIP) telephones, and multi-channel wireless LAN access points. Besides the wired Internet network, the WGSD-10020HP enables the wireless LAN deployment to be more efficient in the transportation stations to bring high-speed Internet services in wide areas. By adopting PoE Wireless LAN structure, the transportation authority gains benefits from less cost while providing better Internet services in wider areas for the travelers.
     

    VoIP Network in IP Office
    With the business office expansion, the additional telephones required could be installed at less cost via the implementation of PoE IP Telephony system than that of the traditional circuit wiring telephony system. PLANET WGSD-10020HP 802.3at Desktop PoE Switch, which is backward compatible with 802.3af standard, helps enterprises to create an integrated data, voice, and powered network. PLANET 802.3af / 802.3at compliant IP phones and analog telephony adapters can be installed without any additional power cable because the power can be provided via the standard Ethernet cable from the connected WGSD-10020HP. With the WGSD-10020HP, the deployment of IP telephony system becomes more reliable and cost effective, which helps enterprises save tremendous cost when upgrading from the traditional telephony system to IP telephony communications infrastructure.

    Ordering Information
    WGSD-10020HP L2+ 8-Port 10/100/1000T + 2 100/1000X SFP Managed 802.3at PoE Switch


  • Hardware Specifications
    Copper Ports 8 10/ 100/1000BASE-T RJ-45 Auto-MDI/MDI-X ports
    SFP/mini-GBIC Slots 2 1000BASE-SX/LX/BX SFP interfaces (Port-9 and Port-10)
    Supports 100/1000Mbps dual mode and DDM
    Console Port 1 x RS-232 DB9 serial port (115200, 8, N, 1)
    Switch Architecture Store-and-Forward
    Switch Fabric 20Gbps / non-blocking
    Switch Throughput 14.88Mpps@64Bytes
    Address Table 8K entries, automatic source address learning and ageing
    Shared Data Buffer 1392 kilobytes
    ESD Protection 6KV
    Flow Control IEEE 802.3x pause frame for full-duplex
    Back pressure for half-duplex
    Jumbo Frame 9Kbytes
    Reset Button < 5 seconds: System reboot
    > 5 seconds: Factory default
    Dimensions (W x D x H) 330 x 155 x 43.5 mm, 1U high
    Weight 1.8kg
    LED Power, fan alert,
    10/100/1000 Link / Act per RJ-45 port,
    100/1000 Link / Act per SFP port,
    PoE In-Use for Port-1~ 8
    Power Consumption Max. 172.9 watts / 589.6 BTU
    Power Requirements 100~240V AC, 50/60Hz
    Power over Ethernet
    PoE Standard IEEE 802.3af PoE / 802.3at PoE+ PSE
    PoE Power Supply Type End-span
    PoE Power Output Per port 56V DC, 30.8 watts (max.)
    Power Pin Assignment 1/2(+), 3/6(-)
    PoE Power Budget 150 watts (max.)
    PoE Ability PD @ 7 Watts 8 units
    PoE Ability PD @ 15.4 Watts 8 units
    PoE Ability PD @ 30.8 Watts 4 units
    Layer 2 function
    Port Configuration Port disable / enable
    Auto-negotiation 10/100/1000Mbps full and half duplex mode selection
    Flow control disable / enable
    Port Status Display each port’s speed duplex mode, link status, flow control status, auto-negotiation status, trunk status
    Port Mirroring TX / RX / Both
    Many-to-1 monitor
    VLAN 802.1Q tagged based VLAN
    Q-in-Q tunneling
    Private VLAN Edge (PVE)
    MAC-based VLAN
    Protocol-based VLAN
    Voice VLAN
    IP Subnet-based VLAN
    MVR (Multicast VLAN Registration)
    Up to 255 VLAN groups, out of 4094 VLAN IDs
    Link Aggregation IEEE 802.3ad LACP / Static Trunk
    5 groups of 5-Port trunk supported
    Spanning Tree Protocol STP, IEEE 802.1D Spanning Tree Protocol
    RSTP, IEEE 802.1w Rapid Spanning Tree Protocol
    MSTP, IEEE 802.1s Multiple Spanning Tree Protocol
    QoS Traffic classification based, Strict priority and WRR
    8-Level priority for switching
    – Port Number
    – 802.1p priority
    – 802.1Q VLAN tag
    – DSCP/TOS field in IP packet
    IGMP Snooping IGMP (v1/v2/v3) snooping, up to 255 multicast groups
    IGMP Querier mode support
    MLD Snooping MLD (v1/v2) snooping, up to 255 multicast groups
    MLD Querier mode support
    Access Control List IP-based ACL / MAC-based ACL
    Up to 256 entries
    Bandwidth Control Per port bandwidth control
    Ingress: 100Kbps~1000Mbps
    Egress: 100Kbps~1000Mbps
    Layer 3 Functions
    IP Interfaces Max. 8 VLAN interfaces
    Routing Table Max. 32 routing entries
    Routing Protocols IPv4 software Static Routing
    IPv6 software Static Routing
    Management
    Basic Management Interfaces Console / Telnet / Web browser / SNMP v1, v2c
    Secure Management Interfaces SSH, SSL, SNMP v3
    SNMP MIBs RFC 1213 MIB-II
    RFC 1493 Bridge MIB
    RFC 1643 Ethernet MIB
    RFC 2863 Interface MIB
    RFC 2665 Ether-Like MIB
    RFC 2819 RMON MIB (Group 1, 2, 3 and 9)
    RFC 2737 Entity MIB
    RFC 2618 RADIUS Client MIB
    RFC 2863 IF-MIB
    RFC 2933 IGMP-STD-MIB
    RFC 3411 SNMP-Frameworks-MIB
    RFC 4292 IP Forward MIB
    RFC 4293 IP MIB
    RFC 4836 MAU-MIB
    IEEE 802.1X PAE
    LLDP
    Power over Ethernet MIB
    Standards Conformance
    Regulation Compliance FCC Part 15 Class A, CE
    Standards Compliance IEEE 802.3 10BASE-T
    IEEE 802.3u 100BASE-TX/100BASE-FX
    IEEE 802.3z Gigabit SX/LX
    IEEE 802.3ab Gigabit 1000T
    IEEE 802.3x Flow Control and Back pressure
    IEEE 802.3ad Port trunk with LACP
    IEEE 802.1D Spanning Tree protocol
    IEEE 802.1w Rapid Spanning Tree protocol
    IEEE 802.1s Multiple Spanning Tree protocol
    IEEE 802.1p Class of service
    IEEE 802.1Q VLAN Tagging
    IEEE 802.1X Port Authentication Network Control
    IEEE 802.3af Power over Ethernet
    IEEE 802.3at Power over Ethernet Plus
    IEEE 802.1ab LLDP
    RFC 768 UDP
    RFC 793 TFTP
    RFC 791 IP
    RFC 792 ICMP
    RFC 2068 HTTP
    RFC 1112 IGMP version 1
    RFC 2236 IGMP version 2
    RFC 3376 IGMP version 3
    RFC 2710 MLD version 1
    FRC 3810 MLD version 2
    Environment
    Operating Temperature: 0 ~ 50 degrees C
    Relative Humidity: 20 ~ 95% (non-condensing)
    Storage Temperature: -20 ~ 70 degrees C
    Relative Humidity: 20 ~ 95% (non-condensing)
    Ordering Information
    WGSD-10020HP L2+ 8-Port 10/100/1000T + 2 100/1000X SFP Managed 802.3at PoE Switch

Facebooktwittergoogle_pluspinterestlinkedinyoutube

WGSD-10020

box_WGSD-10020
WGSD-10020
L2+ 8-Port 10/100/1000T + 2 100/1000X SFP Managed Switch
1icon_IPv6-Management 2icon_QinQ-VLAN 4icon_MLD_Snooping 2icon_IPv6IPv4_ACLQoS 3icon_IP-Source-Guard 2icon_L3-Static-Routing

  • Multi-function Managed Switch Solution for Small/Medium-size Network for Multiple Applications
    PLANET WGSD-10020 is a desktop size, 10-port Managed Gigabit Switch with powerful L2/L4 network switching engine and advanced IPv6 / IPv4 management functions, designed for SMB and FTTx networks. It can handle an extremely large amount of multicast stream and voice data in a secure topology linking to an Enterprise backbone or high capacity network server with 20Gbps switching fabric delivered in a fanless, 13-inch metal case. It is also ideal for the remote access layer of campus or enterprise networks and the aggregation layer of IP metropolitan networks. The powerful features of QoS and network security offered by the WGSD-10020 provides effective data traffic control for ISPs and enterprises utilizing VoIP, video streaming and multicast applications.
    Solution for IPv6 Networking
    By supporting IPv6 / IPv4 dual stack and plenty of management functions with easy and friendly management interfaces, the WGSD-10020 is the best choice for video, voice and wireless service providers to connect with the IPv6 network. It also helps SMBs to step in the IPv6 era with the lowest investment but not necessary to replace the network facilities while the ISP constructs the IPv6 FTTx edge network.

    Fanless Design
    Adopting the latest chip process and green technology, the WGSD-10020 successfully reduces substantial power consumption with the fanless and noiseless design collocating with the effective cooler. Therefore, the WGSD-10020 is able to operate stably and quietly in any environment without affecting its performance.

    Layer 3 IPv4 and IPv6 Software VLAN Routing for Secure and Flexible Management
    To help customers stay on top of their businesses, the WGSD-10020 not only provides ultra high transmission performance and excellent layer 2 technologies, but also offers IPv4/IPv6 Software VLAN routing feature which allows to cross over different VLANs and different IP addresses for the purpose of having a highly secured, flexible management and simpler networking application.

    Robust Layer 2 Features
    The WGSD-10020 can be programmed for advanced switch management function, such as dynamic port link aggregation, Q-in-Q VLAN, Multiple Spanning Tree Protocol (MSTP), Layer 2/4 QoS, bandwidth control andIGMP/MLD snooping. The WGSD-10020 allows the operation of a high-speed trunk combining multiple ports. It enables you to configure up to 5 ports as a trunk group (a maximum of 5 trunk groups are available), and supports connection fail-over as well.

    Powerful Security
    The WGSD-10020 offers comprehensive layer 2 to layer 4 access control list (ACL) for enforcing security to the edge. It can be used to restrict to network access by denying packets based on source and destination IP address, TCP/UDP port number or defined typical network applications. Its protection mechanism also comprises802.1x port-based and MAC-based user and device authentication.

    Enhanced Security and Traffic Control
    The WGSD-10020 also provides DHCP Snooping, IP Source Guard and Dynamic ARP Inspection functions to prevent IP snooping from attack and discard ARP packets with invalid MAC address. The network administrator can now construct highly-secured corporate networks with considerably less time and effort than before.

    User-friendly Secure Management
    For efficient management, the WGSD-10020 managed switch series is equipped with console, Web and SNMP management interfaces. With the built-in web-based management interface, the WGSD-10020 offers an easy-to-use, platform-independent management and configuration facility. The WGSD-10020 supports SNMP and it can be managed via any management software based on standard of SNMP v1 and v2 protocol. For reducing product learning time, the WGSD-10020 offers Cisco-like command via Telnet or console port and customer doesn’t need to learn new command from these switches. Moreover, the WGSD-10020 offers remote secure management by supporting SSH, SSL and SNMPv3 connection which can be encrypted the packet content at each session.

    Flexible and Extendable Solution
    The two mini-GBIC SFP slots built in the WGSD-10020 support dual speed as it features 100BASE-FX and1000BASE-SX/LX SFP (Small Form-factor Pluggable) fiber-optic modules, meaning the administrator can flexibly choose the suitable SFP transceiver according to not only the transmission distance, but also the transmission speed required. The distance can be extended from 550 meters to 2km (multi-mode fiber) and up to above 10/20/30/40/50/70/120 kilometers (single-mode fiber or WDM fiber). They are well suited for applications within the enterprise data centers and distributions.

    Intelligent SFP Diagnosis Mechanism
    The WGSD-10020 supports SFP-DDM (Digital Diagnostic Monitor) function that greatly helps network administrator to easily monitor real-time parameters of the SFP transceivers, such as optical output power, optical input power, temperature, laser bias current, and transceiver supply voltage.

    Ordering Information
    WGSD-10020 L2+ 8-Port 10/100/1000T + 2 100/1000X SFP Managed Switch


  • Department / Edge Security and QoS Switches for SMBs
    The WGSD-10020 connects up to 10 high-speed workstations in the Ethernet environment, in which its two SFP mini-GBIC interfaces uplink to a department backbone. Moreover, the Switch provides 20 Gigabit per second switch fabric and high bandwidth for backbone connection. The WGSD-10020 improves the network efficiency and protects the network clients with the following powerful features:
    • IPv6 / IPv4 management
    • Layer 2 to Layer 4 security
    • QoS
    • 802.1x Port-based and MAC-based network access authentication security
    • Multicast IGMP/MLD SnoopingThe advanced functionality of the WGSD-10020 eliminates traditional issues associated with the use of Ethernet. Users can be separated with advanced VLAN functionality to enhance security. It makes the WGSD-10020 one of the best and most cost-effective switch solutions for SMBs.
    FTTX / MAN Application Switch
    The WGSD-10020 applies the double tag VLAN (Q-in-Q) technology to providing low cost and easy operation for service providers carrying traffic for multiple customers across their networks. It features SNMPv3 and RMON Groups security functions. The SNMPv3 security structure consists of security models and helps to isolate each model with its own security levels to enhance the security protections in the FTTX and MAN networks. With its two built-in dual-speed SFP slots, the deployment distance of the WGSD-10020 can be extended up to 120 kilometers, which provides a high-performance edge service for FTTx solutions. To build a network solution of FTTH (Fiber to the Home) or FTTC (Fiber to the Curb) for ISPs and FTTB (Fiber to the Building) for enterprises, the various distances of SFP and Bidi (WDM) transceivers are optional for customers’ choices. For security and various applications, the 10 Gigabit ports of the WGSD-10020 can be configured with VLAN settings and connect to different units, offices, floors, houses and departments.
    Ordering Information
    WGSD-10020 L2+ 8-Port 10/100/1000T + 2 100/1000X SFP Managed Switch


  • Hardware Specifications
    Copper Ports 8 10/ 100/1000BASE-T RJ45 Auto-MDI/MDI-X ports
    SFP/mini-GBIC Slots 2 1000BASE-SX/LX/BX SFP interfaces (Port-9 and Port-10)
    Supports 100/1000Mbps dual mode and DDM
    Console Port 1 x RS-232 DB9 serial port (115200, 8, N, 1)
    Switch Architecture Store-and-Forward
    Switch Fabric 20Gbps / non-blocking
    Switch Throughput 14.88Mpps@64Bytes
    Address Table 8K entries, automatic source address learning and ageing
    Shared Data Buffer 1392 kilobytes
    ESD Protection 6KV
    Flow Control IEEE 802.3x pause frame for full-duplex
    Back pressure for half-duplex
    Jumbo Frame 9Kbytes
    Reset Button < 5 seconds: System reboot
    > 5 seconds: Factory Default
    Dimensions (W x D x H) 330 x 155 x 43.5 mm, 1U high
    Weight 1.4kg
    LED Power
    10/100/1000 Link / Act per RJ45 port,
    100/1000 Link / Act per SFP port,
    Power Consumption Max. 10.3 watts / 35.13 BTU
    Power Requirements 100~240V AC, 50/60Hz
    Layer 2 function
    Port Configuration Port disable / enable
    Auto-negotiation 10/100/1000Mbps full and half duplex mode selection
    Flow control disable / enable
    Port Status Display each port’s speed duplex mode, link status, flow control status, auto-negotiation status, trunk status
    Port Mirroring TX / RX / Both
    Many-to-1 monitor
    VLAN 802.1Q tagged based VLAN
    Q-in-Q tunneling
    Private VLAN Edge (PVE)
    MAC-based VLAN
    Protocol-based VLAN
    Voice VLAN
    IP Subnet-based VLAN
    MVR (Multicast VLAN Registration)
    Up to 255 VLAN groups, out of 4094 VLAN IDs
    Link Aggregation IEEE 802.3ad LACP / Static Trunk
    5 groups of 5-Port trunk supported
    Spanning Tree Protocol STP, IEEE 802.1D Spanning Tree Protocol
    RSTP, IEEE 802.1w Rapid Spanning Tree Protocol
    MSTP, IEEE 802.1s Multiple Spanning Tree Protocol
    QoS Traffic classification based, Strict priority and WRR
    8-Level priority for switching
    – Port Number
    – 802.1p priority
    – 802.1Q VLAN tag
    – DSCP/TOS field in IP packet
    IGMP Snooping IGMP (v1/v2/v3) Snooping, up to 255 multicast groups
    IGMP Querier mode support
    MLD Snooping MLD (v1/v2) Snooping, up to 255 multicast groups
    MLD Querier mode support
    Access Control List IP-based ACL / MAC-based ACL
    Up to 256 entries
    Bandwidth Control Per port bandwidth control
    Ingress: 100Kbps~1000Mbps
    Egress: 100Kbps~1000Mbps
    Layer 3 Functions
    IP Interfaces Max. 8 VLAN interfaces
    Routing Table Max. 32 routing entries
    Routing Protocols IPv4 software Static Routing
    IPv6 software Static Routing
    Management
    Basic Management Interfaces Console / Telnet / Web browser / SNMP v1, v2c
    Secure Management Interfaces SSH, SSL, SNMP v3
    SNMP MIBs RFC-1213 MIB-II
    RFC-1493 Bridge MIB
    RFC-1643 Ethernet MIB
    RFC-2863 Interface MIB
    RFC-2665 Ether-Like MIB
    RFC-2819 RMON MIB (Group 1, 2, 3 and 9)
    RFC-2737 Entity MIB
    RFC-2618 RADIUS Client MIB
    RFC-2863 IF-MIB
    RFC-2933 IGMP-STD-MIB
    RFC-3411 SNMP-Frameworks-MIB
    RFC-4292 IP Forward MIB
    RFC-4293 IP MIB
    RFC-4836 MAU-MIB
    IEEE 802.1X PAE
    LLDP
    Standards Conformance
    Regulation Compliance FCC Part 15 Class A, CE
    Standards Compliance IEEE 802.3 10BASE-T
    IEEE 802.3u 100BASE-TX/100BASE-FX
    IEEE 802.3z Gigabit SX/LX
    IEEE 802.3ab Gigabit 1000BASE-T
    IEEE 802.3x Flow Control and Back pressure
    IEEE 802.3ad Port trunk with LACP
    IEEE 802.1D Spanning Tree protocol
    IEEE 802.1w Rapid Spanning Tree protocol
    IEEE 802.1s Multiple Spanning Tree protocol
    IEEE 802.1p Class of service
    IEEE 802.1Q VLAN Tagging
    IEEE 802.1X Port Authentication Network Control
    IEEE 802.1ab LLDP
    RFC 768 UDP
    RFC 793 TFTP
    RFC 791 IP
    RFC 792 ICMP
    RFC 2068 HTTP
    RFC 1112 IGMP version 1
    RFC 2236 IGMP version 2
    RFC 3376 IGMP version 3
    RFC 2710 MLD version 1
    FRC 3810 MLD version 2
    Environment
    Operating Temperature: 0 ~ 50 degrees C
    Relative Humidity: 20 ~ 95% (non-condensing)
    Storage Temperature: -20 ~ 70 degrees C
    Relative Humidity: 20 ~ 95% (non-condensing)
    Ordering Information
    WGSD-10020 L2+ 8-Port 10/100/1000T + 2 100/1000X SFP Managed Switch

Facebooktwittergoogle_pluspinterestlinkedinyoutube

SGS-5220-24T2X

box_SGSW-26040
SGS-5220-24T2X
L2+ 24-Port 10/100/1000T + 4-Port Shared SFP + 2-Port 10G SFP+ Managed Stackable Switch
7icon_stackable 1icon_SFP+ 1icon_IPv6-Management 2icon_QinQ-VLAN 2icon_L3-Static-Routing 4icon_SSL-SSH

  • High-Density, Resilient Deployment Switch Solution for Gigabit Networking of Enterprise, Campus and Data Center
    For the growing Gigabit network and IoT (Internet of Things) demand, PLANET has launched a new-generation Stackable Gigabit Switch solution, the SGS-5220 switch series, to meet the needs of enterprises, telecoms and campuses for a large-scale network deployment. The SGS-5220-24T2X is Layer 2+ Managed Stackable Gigabit Switch, which supports both IPv4 and IPv6 protocols and hardware Layer 3 static routing capability, and provides 24 10/100/1000Mbps Gigabit Ethernet ports, 4 shared Gigabit SFP slots, 2 10G SFP+ uplink slots and another 2 dedicated 10G SFP+ stacked interfaces for stacking with the series of switches. Up to 16 units, 384 Gigabit Ethernet ports and 32 10Gbps SFP+ slots can be managed by a stacking group and you can add ports and functionality as needed.
    Efficient Single IP Management
    The SGS-5220 series applies the advantage of the stacking technology to managing the stack group with one single IP address, which helps network managers to easily manage a stack of switches instead of connecting and setting each unit one by one. The stacking technology also enables the chassis-based switches to be integrated into the SGS-5220 Managed Switch series at an inexpensive cost.
    Highly-reliable Stacking Ability
    Through its up to 40Gbps, bi-directional high bandwidth tunnel and stacking technology, the SGS-5220-24T2X gives the enterprises, service providers and telecoms flexible control over port density, uplinks and switch stack performance. The stack redundancy of the SGS-5220-24T2X ensures that data integrity is retained even if one switch in the stack fails. You can even hot-swap switches without disrupting the network, which greatly simplifies the tasks of upgrading the LAN for catering to increasing bandwidth demands.
    Cost-effective 10Gbps Uplink Capacity
    10G Ethernet is a big leap in the evolution of Ethernet. The two 10G SFP+ slot of the SGS-5220-24T2X supportsDual-speed, 10GBase-SR/LR or 1000Base-SX/LX, meaning the administrator now can flexibly choose the suitable SFP/SFP+ transceiver according to the transmission distance or the transmission speed required to extend the network efficiently. They greatly support SMB network to achieve 10Gbps high performance in a cost-effective way because 10GbE interface usually could be available in Layer 3 Switch but Layer 3 Switch could be too expensive to SMBs.

    Solution for IPv6 Networking
    By supporting IPv6 / IPv4 dual stack and plenty of management functions with easy and friendly management interfaces, the SGS-5220 series is the best choice for IP surveillance, VoIP and wireless service providers to connect with the IPv6 network. It also helps the SMB to step in the IPv6 era with the lowest investment but not necessary to replace the network facilities while the ISP constructs the IPv6 FTTx edge network.

    IPv4 and IPv6 VLAN Routing for Secure and Flexible Management
    To help customers stay on top of their businesses, the SGS-5220 switch series not only provides ultra high transmission performance and excellent layer 2 technologies, but also offers IPv4/IPv6 VLAN routing feature which allows to cross over different VLANs and different IP addresses for the purpose of having a highly secured, flexible management and simpler networking application.

    Robust Layer2 Features
    The SGS-5220 series can be programmed for advanced switch management function, such as dynamic port link aggregation, Q-in-Q VLAN, Multiple spanning tree protocol(MSTP), Layer 2/4 QoS, bandwidth control andIGMP/MLD snooping. The SGS-5220 series allows the operation of a high-speed trunk combining multiple ports. It enables up to 14 groups of 8 ports for trunk maximum and supports connection fail-over as well.

    Powerful Security
    The SGS-5220 series offers comprehensive layer2 to layer4 access control list (ACL) for enforcing security to the edge. It can be used to restrict to network access by denying packets based on source and destination IP address, TCP/UDP port number or defined typical network applications. Its protection mechanism also comprises802.1x Port-based and MAC-based user and device authentication. With the private VLAN function, communication between edge ports can be prevented to ensure user privacy.

    Enhanced Security and Traffic Control
    The SGS-5220 series also provides DHCP Snooping, IP Source Guard and Dynamic ARP Inspection
    functions to prevent IP snooping from attack and discard ARP packets with invalid MAC address. The network administrator can now construct highly secured corporate networks with considerably less time and effort than before.

    User-friendly Secure Management
    For efficient management, the SGS-5220 series managed switch series is equipped with console, web and SNMP management interfaces. With the built-in web-based management interface, the SGS-5220 series offers an easy-to-use, platform independent management and configuration facility. The SGS-5220 series supports SNMP and it can be managed via any management software based on standard of SNMP v1 and v2 protocol. For reducing product learning time, the SGS-5220 series offers Cisco-like command via Telnet or console port and customer doesn’t need to learn new command from these switches. Moreover, the SGS-5220 series offers remote secure management by supporting SSH, SSL and SNMPv3 connection which can be encrypted the packet content at each session.

    Flexible and Extendable Solution
    The 4 mini-GBIC SFP slots built in the SGS-5220-24T2X support dual speed as it features 100Base-FX and 1000Base-SX/LX SFP (Small Form-factor Pluggable) fiber-optic modules. Now the administrator can flexibly choose the suitable SFP transceiver according to not only the transmission distance, but also the transmission speed required. The distance can be extended from 550 meters to 2km (multi-mode fiber) and up to above 10/20/30/40/50/70/120 kilometers (single-mode fiber or WDM fiber). They are well suited for applications within the enterprise data centers and distributions.

    Intelligent SFP Diagnosis Mechanism
    The SGS-5220-24T2X supports SFP-DDM (Digital Diagnostic Monitor) function that greatly helps network administrator to easily monitor real-time parameters of the SFP and SFP+ transceivers, such as optical output power, optical input power, temperature, laser bias current, and transceiver supply voltage.

    Ordering Information
    SGS-5220-24T2X L2+ 24-Port 10/100/1000T + 4-Port Shared SFP + 2-Port 10G SFP+ Managed Stackable Switch


  • Good Scalability and Reliability solution for Virtualization and Data Replication / Backup
    For high-volume Virtualization and Data Replication / Backup such as on the campus and enterprise, PLANET SGS-5220-24T2X Managed Stackable switches allow an affordable and scalable network deployment. Up to 40Gbps of stacking backplane fiber-optic connections allow stacked switches to be placed in multiple physical locations, supporting remote or branch offices. Up to 16 units, 320 Gigabit Ethernet ports, 64 Gigabit TP/SFP ports and 32 high-capacity 10G SFP+ ports can be managed by a stacking group with one single IP address. Furthermore, it is available for remote uplink connectivity in a stacking group and provides the uplink to the edge network through SFP/SFP+ modules. The SGS-5220-24T2X stackable switching system gives you the flexibility to expand small area network when needed.
    Excellent Solution to Core/Data Center Security and QoS Switch
    The SGS-5220-24T2X performs 128 Gigabits per second non-blocking switch fabric so it can easily provide a local 10Gbps high bandwidth Ethernet network for backbone of your department. With the two built-in SFP+ ports, the SGS-5220-24T2X provides the uplink to the backbone network through the 10G Ethernet LR/SR SFP+ modules. It further improves the network efficiency and protects the network clients by offering the security and QoS features.
    By means of improving the technology of Optical Fiber Ethernet with highly-flexible, highly-extendable and easy-to-install features, the SGS-5220-24T2X offers up to 10Gbps data exchange speed via optical fiber interface and the transmission distance can be extended to10km. The SGS-5220-24T2X is the ideal solution for SMBs to build redundant connection and establish high bandwidth for server farm.
    Ordering Information
    SGS-5220-24T2X L2+ 24-Port 10/100/1000T + 4-Port Shared SFP + 2-Port 10G SFP+ Managed Stackable Switch


  • Hardware Specifications
    Copper Ports 24 10/ 100/1000Base-T RJ-45 Auto-MDI/MDI-X ports
    10/100/1000Mbps / SFP Combo Interfaces 4 10/100/1000Mbps TP and SFP shared combo interfaces, SFP (Mini-GBIC) supports 100/1000Mbps Dual mode DDM, shared with Port-21 to Port-24
    10Gbps Fiber Uplink Ports 2 1/10GBase-SR/LR SFP+ slots
    10G Stackable Ports 2 10GBase-SR/LR SFP+ slots
    Console 1 x RJ-45 serial port (115200, 8, N, 1)
    Switch Architecture Store-and-Forward
    Switch Fabric 128Gbps / non-blocking
    Throughput 95.2Mpps@64Bytes
    Address Table 16K entries, automatic source address learning and ageing
    Shared Data Buffer 4 megabits
    Flow Control IEEE 802.3x pause frame for full-duplex
    Back pressure for half-duplex
    Jumbo Frame 9K bytes
    Reset Button < 5 sec: System reboot
    > 5 sec: Factory Default
    LED System:
    PWR (Green)
    Master (Green)
    Fan1 Alert (Green)
    Fan2 Alert (Green)
    Ethernet Interfaces (Port 1 to Port 24):
    1000 LNK/ACT (Green), 10/100 LNK/ACT (Orange)
    100/1000Mbps SFP Combo Interfaces (Port 21 to Port 24):
    1000 (Green), 100 (Orange)
    1/10G SFP+ Interfaces (Port 25 to Port 26):
    10G (Green), 1G (Orange)
    10G Stackable Interfaces (Port 27 to Port 28):
    Stack (Green), LNK/ACT (Orange)
    Power Requirements 100~240V AC, 50/60Hz, 2A
    Power Consumption (Full Loading) 43 watts
    ESD Protection 6KV DC
    Dimensions (W x D x H) 440 x 200 x 44.5 mm, 1U high
    Weight 2850g
    Stacking Functions
    Stacking Ports 2 SFP+ slots
    Stacking Numbers 16
    Stacking Bandwidth 40Gbps full duplex
    Stack ID Display 7-Segment LED display (1~9, A~F, 0)
    Stack Topology Ring / Chain / Back-to-Back
    Layer2 Management Function
    Basic Management Interfaces Console, Telnet, Web Browser, SNMP v1, v2c
    Secure Management Interfaces SSH, SSL, SNMP v3
    Port Configuration Port disable / enable
    Auto-negotiation 10/100/1000Mbps full and half duplex mode selection
    Flow Control disable / enable
    Port Status Display each port’s speed duplex mode, link status, flow control status, auto negotiation status, trunk status
    Port Mirroring TX / RX / Both
    Many-to-1 monitor
    VLAN 802.1Q tagged based VLAN, up to 255 VLAN groups
    Q-in-Q tunneling
    Private VLAN Edge (PVE)
    MAC-based VLAN
    Protocol-based VLAN
    Voice VLAN
    MVR (Multicast VLAN Registration)
    Up to 255 VLAN groups, out of 4094 VLAN IDs
    Link Aggregation IEEE 802.3ad LACP / Static Trunk
    Supports 10 groups of 16-Port trunk
    QoS Traffic classification based, Strict priority and WRR
    8-Level priority for switching
    – Port Number
    – 802.1p priority
    – 802.1Q VLAN tag
    – DSCP/TOS field in IP Packet
    IGMP Snooping IGMP (v1/v2/v3) Snooping, up to 255 multicast Groups
    IGMP Querier mode support
    MLD Snooping MLD (v1/v2) Snooping, up to 255 multicast Groups
    MLD Querier mode support
    Access Control List IP-based ACL / MAC-based ACL
    Up to 256 entries
    Bandwidth Control Per port bandwidth control
    Ingress: 100Kbps~1000Mbps
    Egress: 100Kbps~1000Mbps
    SNMP MIBs RFC 1213 MIB-II
    IF-MIB
    RFC 1493 Bridge MIB
    RFC 1643 Ethernet MIB
    RFC 2863 Interface MIB
    RFC 2665 Ether-Like MIB
    RFC 2737 Entity MIB
    RFC 2819 RMON MIB (Group 1, 2, 3 and 9)
    RFC 2618 RADIUS Client MIB
    RFC 3411 SNMP-Frameworks-MIB
    IEEE 802.1X PAE
    LLDP
    MAU-MIB
    Layer3 Function
    IP Interfaces Max. 128 VLAN interfaces
    Routing Table Max. 32 routing entries
    Routing Protocols IPv4 hardware Static Routing
    IPv6 hardware Static Routing
    Standards Conformance
    Regulation Compliance FCC Part 15 Class A, CE
    Standards Compliance IEEE 802.3 10Base-T
    IEEE 802.3u 100Base-TX/100Base-FX
    IEEE 802.3z 1000Base-SX/LX
    IEEE 802.3ab 1000Base-T
    IEEE 802.3x flow control and back pressure
    IEEE 802.3ad port trunk with LACP
    IEEE 802.1D Spanning Tree protocol
    IEEE 802.1w Rapid Spanning Tree protocol
    IEEE 802.1s Multiple Spanning Tree protocol
    IEEE 802.1p Class of service
    IEEE 802.1Q VLAN tagging
    IEEE 802.1x Port Authentication Network Control
    IEEE 802.1ab LLDP
    RFC 768 UDP
    RFC 793 TFTP
    RFC 791 IP
    RFC 792 ICMP
    RFC 2068 HTTP
    RFC 1112 IGMP version 1
    RFC 2236 IGMP version 2
    RFC 3376 IGMP version 3
    RFC 2710 MLD version 1
    FRC 3810 MLD version 2
    Environments
    Operating Temperature: 0 ~ 50 degrees C
    Relative Humidity: 5 ~ 95% (non-condensing)
    Storage Temperature: -10 ~ 70 degrees C
    Relative Humidity: 5 ~ 95% (non-condensing)
    Ordering Information
    SGS-5220-24T2X L2+ 24-Port 10/100/1000T + 4-Port Shared SFP + 2-Port 10G SFP+ Managed Stackable Switch

Facebooktwittergoogle_pluspinterestlinkedinyoutube

SGS-5220-24P2X

box_SGS-5220-24P2X
SGS-5220-24P2X undefined
L2+ 24-Port 10/100/1000T 802.3at PoE + 2-Port 10G SFP+ Stackable Managed Switch / 440W
7icon_stackable 1icon_SFP+ 1icon_IPv6-Management 8icon_802.3at_802.3af_End-span 2icon_L3-Static-Routing 4icon_SSL-SSH

  • High-density, Resilient Deployment Switch Solution for Gigabit Networking of Enterprise, Campus and Data Center
    For the growing Gigabit network and IoT (Internet of Things) demand, PLANET has launched a new-generation Stackable Gigabit Switch solution, the SGS-5220 switch series, to meet the needs of enterprises, telecoms and campuses for a large-scale network deployment. The SGS-5220-24P2X is Layer 2+ Stackable Managed Gigabit Switch, which supports both IPv4 and IPv6 protocols and hardware Layer 3 static routing capability, and provides 24 10/100/1000Mbps 802.3at PoE+ ports, 4 shared Gigabit SFP slots, 2 10G SFP+ uplink slotsand another 2 dedicated 10G SFP+ stacked interfaces for stacking with the series of switches. Up to 16 units, 384 Gigabit Ethernet PoE+ ports and 32 10Gbps SFP+ slots can be managed by a stacking group and you can add ports and functionality as needed.
    Efficient Single IP Management
    The SGS-5220 stackable series applies the advantage of the stacking technology to managing the stack group with one single IP address, which helps network managers to easily manage a stack of switches instead of connecting and setting each unit one by one. The stacking technology also enables the chassis-based switches to be integrated into the SGS-5220 Stackable Managed Switch series at an inexpensive cost.
    Highly-reliable Stacking Ability
    Through its up to 40Gbps, bi-directional high bandwidth tunnel and stacking technology, the SGS-5220-24P2X gives the enterprises, service providers and telecoms flexible control over port density, uplinks and switch stack performance. The stack redundancy of the SGS-5220-24P2X ensures that data integrity is retained even if one switch in the stack fails. You can even hot-swap switches without disrupting the network, which greatly simplifies the tasks of upgrading the LAN for catering to increasing bandwidth demands.

    Centralized Power Management for Gigabit Ethernet PoE Networking
    To fulfill the needs of higher power required PoE network applications with Gigabit speed transmission, the SGS-5220-24P2X features high-performance Gigabit IEEE 802.3af PoE (up to 15.4 watts) and IEEE 802.3at PoE+ (up to 30 watts) on all ports. It perfectly meets the power requirement of PoE VoIP phone and all kinds of PoE IP cameras such as IR, PTZ, speed dome cameras or even box type IP cameras with built-in fan and heater for high power consumption.

    The SGS-5220-24P2X’s PoE capabilities also help to reduce deployment costs for network devices as a result of freeing from restrictions of power outlet locations. Power and data switching are integrated into one unit, delivered over a single cable and managed centrally. It thus eliminates cost for additional AC wiring and reduces installation time.

    Built-in Unique PoE Functions for Surveillance Management
    As a managed PoE Switch for surveillance network, the SGS-5220-24P2X features intelligent PoE Management functions:
    ■ PD ALIVE Check
    ■ Scheduled Power Recycling
    ■ SMTP/SNMP Trap Event Alert
    ■ PoE Schedule

    Intelligent Powered Device Alive Check
    The SGS-5220-24P2X can be configured to monitor connected PD (Powered Device) status in real-time via ping action. Once the PD stops working and it is without response, the SGS-5220-24P2X will resume the PoE port power and bring the PD back to work. It will greatly enhance the network reliability through the PoE port resetting the PD’s power source, thus reducing administrator management burden.

    Scheduled Power Recycling
    The SGS-5220-24P2X allows each of the connected PDs (Powered Devices) to reboot in a specific time each week. Therefore, it will reduce the chance of PD (Powered Device) crash resulting from buffer overflow.
    SMTP/SNMP Trap Event Alert
    Though most NVR or camera management software offers SMTP email alert function, the SGS-5220-24P2X further provides event alert function to help to diagnose the abnormal device owing to whether or not there is a break of the network connection, loss of PoE power or the rebooting response by the PD Alive Check process.

    PoE Schedule for Energy Saving
    Besides being used for IP surveillance, the SGS-5220-24P2X is certainly applicable to construct any PoE network including VoIP and wireless LAN. Under the trend of energy saving worldwide and contributing to the environmental protection on the Earth, the SGS-5220-24P2X can effectively control the power supply besides its capability of giving high watts power. The “PoE schedule” function helps you to enable or disable PoE power feeding for each PoE port during specified time intervals and it is a powerful function to help SMB or Enterprise save energy and money.

    Cost-effective 10Gbps Uplink Capacity
    10G Ethernet is a big leap in the evolution of Ethernet. The two 10G SFP+ slots of the SGS-5220-24P2X support Dual-speed, 10GBASE-SR/LR or 1000BASE-SX/LX, meaning the administrator now can flexibly choose the suitable SFP/SFP+ transceiver according to the transmission distance or the transmission speed required to extend the network efficiently. They greatly support SMB network to achieve 10Gbps high performance in a cost-effective way because 10GbE interface usually could be available in Layer 3 Switch but Layer 3 Switch could be too expensive to SMBs.

    Solution for IPv6 Networking
    With the support for IPv6 / IPv4 protocol, and easy and friendly management interfaces, the SGS-5220 series is the best choice for IP surveillance, VoIP and wireless service providers to connect with the IPv6 network. It also helps the SMB to step in the IPv6 era with the lowest investment but not necessary to replace the network facilities while the ISP constructs the IPv6 FTTx edge network.

    IPv4 and IPv6 VLAN Routing for Secure and Flexible Management
    To help customers stay on top of their businesses, the SGS-5220 switch series not only provides ultra high transmission performance and excellent layer 2 technologies, but also offers IPv4/IPv6 VLAN routing feature which allows to crossover different VLANs and different IP addresses for the purpose of having a highly secured, flexible management and simpler networking application.

    Robust Layer2 Features
    The SGS-5220 series can be programmed for advanced switch management function, such as dynamic port link aggregation, Q-in-Q VLAN, Multiple Spanning Tree Protocol(MSTP), Layer 2/4 QoS, bandwidth control andIGMP/MLD snooping. The SGS-5220 series allows the operation of a high-speed trunk combining multiple ports. Supporting 14 trunk groups, it enables a maximum of up to 8 ports per trunk and supports connection fail-over as well.

    Powerful Security
    The SGS-5220 series offers comprehensive layer2 to layer4 access control list (ACL) for enforcing security to the edge. It can be used to restrict network access by denying packets based on source and destination IP address, TCP/UDP port number or defined typical network applications. Its protection mechanism also comprises802.1x Port-based and MAC-based user and device authentication. With the private VLAN function, communication between edge ports can be prevented to ensure user privacy.

    Enhanced Security and Traffic Control
    The SGS-5220 series also provides DHCP Snooping, IP Source Guard and Dynamic ARP Inspection functions to prevent IP snooping from attack and discard ARP packets with invalid MAC address. The network administrator can now construct highly secured corporate networks with considerably less time and effort than before.

    User-friendly Secure Management
    For efficient management, the SGS-5220 managed switch series is equipped with console, web and SNMP management interfaces. With the built-in web-based management interface, the SGS-5220 series offers an easy-to-use, platform independent management and configuration facility. The SGS-5220 series supports SNMP and it can be managed via any management software based on the standard SNMP v1 and v2 protocols. For reducing product learning time, the SGS-5220 series offers Cisco-like command via Telnet or console port and customer doesn’t need to learn new command from these switches. Moreover, the SGS-5220 series offers remote secure management by supporting SSH, SSL and SNMPv3 connection which can encrypt the packet content at each session.

    Flexible and Extendable Solution
    The 4 mini-GBIC SFP slots built in the SGS-5220-24P2X support dual speed as it features 100BASE-FX and 1000BASE-SX/LX SFP (Small Form-factor Pluggable) fiber-optic modules. Now the administrator can flexibly choose the suitable SFP transceiver according to not only the transmission distance, but also the transmission speed required. The distance can be extended from 550 meters to 2km (multi-mode fiber) and up to 10/20/30/40/50/70/120 kilometers (single-mode fiber or WDM fiber). They are well suited for applications within the enterprise data centers and distributions.

    Intelligent SFP Diagnosis Mechanism
    The SGS-5220-24P2X supports SFP-DDM (Digital Diagnostic Monitor) function that greatly helps network administrator to easily monitor real-time parameters of the SFP and SFP+ transceivers, such as optical output power, optical input power, temperature, laser bias current, and transceiver supply voltage.
    Ordering Information
    SGS-5220-24P2X L2+ 24-Port 10/100/1000Mbps 802.3at PoE + 4-Port 10G SFP+ Stackable Managed Switch


  • Layer 2+ VLAN Static Routing and PoE Application
    With the built-in robust IPv4 / IPv6 Layer 3 traffic routing protocols, the SGS-5220-24P2X ensures reliable routing between VLANs and network segments. The routing protocols can be applied by VLAN interface with up to 128 routing entries. The SGS-5220-24P2X is certainly a cost-effective and ideal solution for enterprises.Providing up to 24-Port Gigabit High-power PoE and in-line power interface, the SGS-5220-24P2X High-power PoE Switch can easily build a centrally-controlled power network shared by wireless Gigabit AP, IP phone system, or mega-pixel IP camera system group for the enterprises. For instance, 24 IP cameras and wireless APs can be easily installed around the corner in the company for surveillance demands or a wireless roaming environment in the office. Without the power-socket limitation, the stackable PoE Switch makes the deployment of IP cameras or Wireless LAN AP easier and more efficient.
    While video surveillance system becomes more and more important for visible security in the factory, warehouse, and public places, the IP cameras with PoE function would be a lot helpful for the surveillance deployment when the power outlet is not easily found in the ceiling or in the outdoor. For example, in the factory operation or in the warehouse storage security, the PoE IP camera can be installed anywhere regardless of the restrictions of power outlet location. With the PoE Switch SGS-5220-24P2X acting as the central control manager and offering remote power monitoring via Web interface or SNMP trap and SNMP monitoring, the manager can get the PoE devices status and alert immediately. The PoE IP cameras can also be controlled remotely, which increases the administrator management efficiency and improves the productivity.
    Ordering Information
    SGS-5220-24P2X L2+ 24-Port 10/100/1000Mbps 802.3at PoE + 4-Port 10G SFP+ Stackable Managed Switch


  • Hardware Specifications
    Copper Ports 24 10/ 100/1000BASE-T RJ-45 Auto-MDI/MDI-X ports
    10/100/1000Mbps / SFP Combo Interfaces 4 10/100/1000Mbps TP and SFP shared combo interfaces, SFP (Mini-GBIC) supports 100/1000Mbps Dual mode DDM, shared with Port-21 to Port-24
    10Gbps Fiber Uplink Ports 2 1/10GBASE-SR/LR SFP+ slots
    10Gbps Fiber Stackable Ports 2 10GBASE-SR/LR SFP+ slots
    Console 1 x RJ45 serial port (115200, 8, N, 1)
    Switch Architecture Store-and-Forward
    Switch Fabric 128Gbps / non-blocking
    Throughput 95.2Mpps@64Bytes
    Address Table 16K entries, automatic source address learning and ageing
    Shared Data Buffer 4 megabits
    Flow Control IEEE 802.3x pause frame for full-duplex
    Back pressure for half-duplex
    Jumbo Frame 9K bytes
    Reset Button < 5 sec: System reboot
    > 5 sec: Factory default
    LED System:
    PWR (Green), Master (Green),
    PWR1 (Green), PWR2 (Green), FAN1 (Green), FAN2 (Green)
    10/100/1000T RJ45 Interfaces (Port 1 to Port 24):
    10/100/1000Mbps LNK/ACT (Green)
    PoE In-Use (Orange)
    100/1000Mbps SFP Combo Interfaces (Port 21 to Port 24):
    1000Mbps (Green), LNK/ACT (Orange)
    1/10Gbps SFP+ Interfaces (Port 25 to Port 26):
    10Gbps LNK/ACT (Green), 1Gbps LNK/ACT (Orange)
    10G Stackable Interfaces (Port 27 to Port 28):
    Stack (Green), LNK/ACT (Orange)
    Power Requirements 100~240V AC, 50/60Hz
    Power Consumption (Full Loading) 502 watts / 1712.8 BTU Max.
    ESD Protection 6KV DC
    Dimensions (W x D x H) 440 x 300 x 44.5 mm, 1U height
    Weight 4887g
    Stacking Functions
    Stacking Ports 2 SFP+ slots
    Stacking Numbers 16
    Stacking Bandwidth 40Gbps full duplex
    Stack ID Display 7-Segment LED display (1~9, A~F, 0)
    Stack Topology Ring / Chain / Back-to-Back
    Power over Ethernet
    PoE Standard IEEE 802.3af / 802.3at PoE / PSE
    PoE Power Supply Type End-span
    PoE Power Output Per Port 56V DC, Max. 30.8 watts
    Power Pin Assignment 1/2(+), 3/6(-)
    PoE Power Budget 440 watts (max.) @ 25 degrees C
    380 watts (max.) @ 50 degrees C
    PoE Ability PD @ 7 watts 24 units
    PD @ 15.4 watts 24 units
    PD @ 30.8 watts 14 units
    Layer2 Management Function
    Basic Management Interfaces Console, Telnet, Web Browser, SNMP v1, v2c
    Secure Management Interfaces SSH, SSL, SNMP v3
    Port Configuration Port disable / enable
    Auto-negotiation 10/100/1000Mbps full and half duplex mode selection
    Flow Control disable / enable
    Port Status Display each port’s speed duplex mode, link status, flow control status, auto negotiation status, trunk status
    Port Mirroring TX / RX / Both
    Many-to-1 monitor
    VLAN 802.1Q tagged based VLAN, up to 255 VLAN groups
    Q-in-Q tunneling
    Private VLAN Edge (PVE)
    MAC-based VLAN
    Protocol-based VLAN
    Voice VLAN
    MVR (Multicast VLAN Registration)
    Up to 255 VLAN groups, out of 4094 VLAN IDs
    Link Aggregation IEEE 802.3ad LACP / Static Trunk
    Supports 14 groups of 8-Port trunk
    QoS Traffic classification based, Strict priority and WRR
    8-level priority for switching
    – Port Number
    – 802.1p priority
    – 802.1Q VLAN tag
    – DSCP/TOS field in IP Packet
    IGMP Snooping IGMP (v1/v2/v3) Snooping, up to 255 multicast Groups
    IGMP Querier mode support
    MLD Snooping MLD (v1/v2) Snooping, up to 255 multicast Groups
    MLD Querier mode support
    Access Control List IP-based ACL / MAC-based ACL
    Up to 256 entries
    Bandwidth Control Per port bandwidth control
    Ingress: 500Kb~80Mbps
    Egress: 64Kb~80Mbps
    SNMP MIBs RFC 1213 MIB-II
    RFC 2863 IF-MIB
    RFC 1493 Bridge MIB
    RFC 1643 Ethernet MIB
    RFC 2863 Interface MIB
    RFC 2665 Ether-Like MIB
    RFC 2737 Entity MIB
    RFC 2819 RMON MIB (Group 1, 2, 3 and 9)
    RFC 2618 RADIUS Client MIB
    RFC 3411 SNMP-Frameworks-MIB
    IEEE 802.1X PAE
    LLDP
    MAU-MIB
    Power over Ethernet MIB
    Layer3 Function
    IP Interfaces Max. 128 VLAN interfaces
    Routing Table Max. 32 routing entries
    Routing Protocols IPv4 hardware static routing
    IPv6 hardware static routing
    Standards Conformance
    Regulation Compliance FCC Part 15 Class A, CE
    Standards Compliance IEEE 802.3 10BASE-T
    IEEE 802.3u 100BASE-TX/100BASE-FX
    IEEE 802.3z 1000BASE-SX/LX
    IEEE 802.3ab 1000BASE-T
    IEEE 802.3x flow control and back pressure
    IEEE 802.3ad port trunk with LACP
    IEEE 802.1D Spanning Tree Protocol
    IEEE 802.1w Rapid Spanning Tree Protocol
    IEEE 802.1s Multiple Spanning Tree Protocol
    IEEE 802.1p Class of Service
    IEEE 802.1Q VLAN tagging
    IEEE 802.1x Port Authentication Network Control
    IEEE 802.1ab LLDP
    IEEE 802.3af Power over Ethernet
    IEEE 802.3at Power over Ethernet Plus
    RFC 768 UDP
    RFC 793 TFTP
    RFC 791 IP
    RFC 792 ICMP
    RFC 2068 HTTP
    RFC 1112 IGMP version 1
    RFC 2236 IGMP version 2
    RFC 3376 IGMP version 3
    RFC 2710 MLD version 1
    FRC 3810 MLD version 2
    Environments
    Operating Temperature: 0 ~ 50 degrees C
    Relative Humidity: 5 ~ 95% (non-condensing)
    Storage Temperature: -10 ~ 70 degrees C
    Relative Humidity: 5 ~ 95% (non-condensing)
    Ordering Information
    SGS-5220-24P2X L2+ 24-Port 10/100/1000Mbps 802.3at PoE + 4-Port 10G SFP+ Stackable Managed Switch

Facebooktwittergoogle_pluspinterestlinkedinyoutube

SGS-6340-48T4S

box_SGS-6340-48T4S
SGS-6340-48T4S undefined
Layer 3 48-Port 10/100/1000T + 4-Port 1000X SFP Stackable Managed Switch
3icon_L3_RIP_Routing 2icon_L3-Static-Routing 4icon_L3_OSPF_Routing 1icon_IPv6-Management

  • Powerful Layer 3 Gigabit Routing Solution for Enterprise Backbone and Data Center Networking
    PLANET SGS-6340-48T4S is a Layer 3 Stackable Managed Gigabit Switch that provides high-density performance,Layer 3 static routing, RIP (Routing Information Protocol) and OSPF (Open Shortest Path First). With104Gbps switching fabric, the SGS-6340-48T4S can handle extremely large amounts of data in a secure topology linking to an enterprise backbone or high capacity servers. The powerful WRR (Weighted Round Robin) and Network Security features make the SGS-6340-48T4S perform effective data traffic control for ISP and enterprise VoIP, video streaming, and multicast applications.
    Layer 3 Routing Support
    The SGS-6340-48T4S enables the administrator to conveniently boost network efficiency by configuring Layer 3 static routing manually, the RIP (Routing Information Protocol) or OSPF (Open Shortest Path First) settings automatically. The RIP can employ the hop count as a routing metric and prevent routing loops by implementing a limit on the number of hops allowed in a path from the source to a destination. The maximum number of hops allowed for the RIP is 15. The OSPF is an interior dynamic routing protocol for autonomous system based on link-state. The protocol creates a link-state database by exchanging link-states among Layer3 switches, and then uses the Shortest Path First algorithm to generate a route table based on that database.

    Abundant IPv6 Support
    The SGS-6340-48T4S provides IPv6 management and enterprise-level secure features such as SSH, ACL, WRRand RADIUS authentication. The SGS-6340-48T4S thus helps the enterprises to step in the IPv6 era with the lowest investment. In addition, you don’t need to replace the network facilities when the IPv6 FTTx edge network is built.

    High Performance
    The SGS-6340-48T4S provides 48 10/100/1000Mbps Gigabit Ethernet ports with 4 additional Gigabit SFP slots. It boasts a high-performance switch architecture that is capable of providing non-blocking switch fabric and wire-speed throughput as high as 104Gbps, which greatly simplifies the tasks of upgrading the LAN for catering to increasing bandwidth demands.

    Robust Layer 2 Features
    The SGS-6340-48T4S can be programmed for basic switch management functions such as port speed configuration, port aggregation, VLAN, Spanning Tree Protocol, WRR, bandwidth control and IGMP snooping. The SGS-6340-48T4S provides 802.1Q tagged VLAN, Q-in-Q, voice VLAN and GVRP Protocol. The VLAN groups allowed to be on the SGS-6340-48T4S will be maximally up to 256. By supporting port aggregation, the SGS-6340-48T4S allows the operation of a high-speed trunk combined with multiple ports. It enables up to 128 groups for trunking with a maximum of 8 ports for each group.

    Excellent Traffic Control
    The SGS-6340-48T4S is loaded with powerful traffic management and WRR features to enhance services offered by telecoms. The WRR functionalities include wire-speed Layer 4 traffic classifiers and bandwidth limitation which are particularly useful for multi-tenant unit, multi-business unit, Telco, or network service applications. It also empowers the enterprises to take full advantage of the limited network resources and guarantees the best performance at VoIP and video conferencing transmission.

    Powerful Security
    The SGS-6340-48T4S supports ACL policies comprehensively. The traffic can be classified by source/destination IP addresses, source/destination MAC addresses, IP protocols, TCP/UDP, IP precedence, time ranges and ToS. Moreover, various policies can be conducted to forward the traffic. The SGS-6340-48T4S also provides IEEE 802.1x port based access authentication, which can be deployed with RADIUS, to ensure the port level security and block illegal users.

    Efficient Management
    The SGS-6340-48T4S supports IP stacking function that helps network managers to easily configure up to 24 switches in the same series via one single IP address instead of connecting and setting each unit one by one. For efficient management, the SGS-6340-48T4S Managed Gigabit Switch is equipped with console, Web and SNMP management interfaces. With its built-in Web-based management interface, the SGS-6340-48T4S offers an easy-to-use, platform-independent management and configuration facility. The SGS-6340-48T4S supports standard Simple Network Management Protocol (SNMP) and can be managed via any standard-based management software. For text-based management, the SGS-6340-48T4S can be accessed via Telnet and the console port. Moreover, the SGS-6340-48T4S offers secure remote management by supporting SSH connection which encrypts the packet content at each session.

    Flexibility and Extension Solution
    The four mini-GBIC slots built in the SGS-6340-48T4S are compatible with 1000BASE-X and WDM SFP (Small Form-factor Pluggable) fiber-optic modules. The distance can be extended from 550 meters (multi-mode fiber) to 10/50/70/120 kilometers (single-mode fiber or WDM fiber). They are well suited for applications within the enterprise data centers and distributions.

    Ordering Information
    SGS-6340-48T4S Layer 3 48-Port 10/100/1000T + 4-Port 1000X SFP Stackable Managed Switch


  • Server Farm Switch
    The SGS-6340-48T4S provides up to 52 Gigabit Ethernet ports for enterprises and network servers. It is ideal to be used as a server farm switch connecting to servers. With its port trunking function, an 8GB fat pipe is provided for connecting to the backbone if required.
    Enterprise Security and QoS Edge Switch
    With the IEEE 802.1x network access authentication, the SGS-6340-48T4S provides the MAC/IP/Protocol Access Control list and Port Security functions which can limit the number of MAC addresses to be passed through one specific port. The IGMP snooping and QoS features in the SGS-6340-48T4S improve the network efficiency and protect the network clients.
    Layer 3 VLAN Routing
    With the built-in robust Layer 3 traffic routing protocols, the SGS-6340-48T4S ensures reliable routing between VLANs and network segments. The routing protocols can be applied via VLAN interface. The SGS-6340-48T4S is certainly a cost-effective and ideal solution for enterprises.
    Ordering Information
    SGS-6340-48T4S Layer 3 48-Port 10/100/1000T + 4-Port 1000X SFP Stackable Managed Switch


  • Hardware Specifications
    Copper Ports 48 10/ 100/1000BASE-T RJ45 auto-MDI/MDI-X ports
    SFP/mini-GBIC Slots 4 1000BASE-X SFP interfaces
    Console 1 x RJ45-to-RS232 serial port (9600, 8, N, 1)
    Switch Architecture Store-and-forward
    Switch Fabric 104Gbps/non-blocking
    Switch Throughput 77.38Mpps
    Address Table 16K MAC address table with auto learning function
    Shared Data Buffer 1.5Mbytes
    Flow Control Back pressure for half-duplex
    IEEE 802.3x pause frame for full-duplex
    Jumbo Frame 9K bytes
    LED System:
    PWR, SYS
    Ports:
    10/100/1000T RJ45 Port: LNK/ACT
    1000X SFP slot: LNK/ACT
    Dimensions (W x D x H) 442 x 280 x 44 mm, 1U height
    Weight 3702g
    Power Consumption 38 watts/129 BTU (maximum)
    Power Requirements AC 100~240V, 50/60Hz
    Management Function
    System Configuration Console, Telnet, SSH, Web browser, SNMP v1, v2c and v3
    Management Supports both IPv4 and IPv6 addressing
    Supports the user IP security inspection for IPv4/IPv6 SNMP
    Supports MIB and TRAP
    Supports IPv4/IPv6 FTP/TFTP
    Supports IPv4/IPv6 NTP
    Supports RMOM 1, 2, 3, 9 four groups
    Supports the RADIUS authentication for IPv4/IPv6 Telnet user name and password
    Supports IPv4/IPv6 SSH
    The right configuration for users to adopt RADIUS server’s shell management
    Supports CLI, console, Telnet
    Supports SNMPv1/v2c/v3
    Supports Security IP safety net management function: avoid unlawful landing at nonrestrictive area
    Supports Syslog server for IPv4 and IPv6
    Supports TACACS+
    Layer 3 Function
    Routing Protocol Static routing, RIP and OSPF
    Routing Table 128
    Layer 2 Function
    Port Configuration Port disable/enable
    Auto-negotiation 10/100/1000Mbps full and half duplex mode selection
    Flow control disable/enable
    Bandwidth control on each port
    Port loopback detect
    Port Status Display each port’s speed duplex mode, link status, flow control status and
    auto negotiation status
    VLAN 802.1Q tagged based VLAN, up to 256 VLAN groups
    802.1ad Q-in-Q (VLAN stacking)
    GVRP for VLAN management
    Private VLAN Edge (PVE) supported
    Protocol-based VLAN
    MAC-based VLAN
    IP subnet VLAN
    Bandwidth Control TX/RX/both
    Link Aggregation IEEE 802.3ad LACP/static trunk
    Supports 128 groups with 8 ports per trunk group
    QoS 8 priority queues on all switch ports
    Supports strict priority and Weighted Round Robin (WRR) CoS policies
    Traffic classification:
    – IEEE 802.1p CoS/ToS
    – IPv4/IPv6 DSCP
    – Port-based WRR
    Multicast IGMP v1/v2/v3 snooping
    Querier mode support
    MLD v1/v2 snooping
    Querier mode support
    Multicast VLAN Register (MVR)
    Access Control List Supports Standard and Expanded ACL
    IP-based ACL/MAC-based ACL
    Time-based ACL
    Up to 512 entries
    Bandwidth Control At least 64Kbps step
    Security Supports MAC + port binding
    IPv4/IPv6 + MAC + port binding
    IPv4/IPv6 + port binding
    Supports MAC filter
    ARP scanning prevention
    Authentication IEEE 802.1x port-based network access control
    AAA authentication: TACACS+ and IPv4/IPv6 over RADIUS
    SNMP MIBs RFC 1213 MIB-II
    RFC 1215 Internet Engineering Task Force
    RFC 1271 RMON
    RFC 1354 IP-Forwarding MIB
    RFC 1493 Bridge MIB
    RFC 1643 Ether-like MIB
    RFC 1907 SNMP v2
    RFC 2011 IP/ICMP MIB
    RFC 2012 TCP MIB
    RFC 2013 UDP MIB
    RFC 2096 IP forward MIB
    RFC 2233 if MIB
    RFC 2452 TCP6 MIB
    RFC 2454 UDP6 MIB
    RFC 2465 IPv6 MIB
    RFC 2466 ICMP6 MIB
    RFC 2573 SNMPV3 notify
    RFC 2574 SNMPV3 vacm
    RFC 2674 Bridge MIB Extensions (IEEE 802.1Q MIB)
    RFC 2674 Bridge MIB Extensions (IEEE 802.1P MIB)
    Standard Conformance
    Regulatory Compliance FCC Part 15 Class A, CE
    Standards Compliance IEEE 802.3 10BASE-T
    IEEE 802.3u 100BASE-TX
    IEEE 802.3z Gigabit 1000BASE-SX/LX
    IEEE 802.3ab Gigabit 1000BASE-T
    IEEE 802.3x flow control and back pressure
    IEEE 802.3ad port trunk with LACP
    IEEE 802.1D Spanning Tree Protocol
    IEEE 802.1w Rapid Spanning Tree Protocol
    IEEE 802.1s Multiple Spanning Tree Protocol
    IEEE 802.1p Class of Service
    IEEE 802.1Q VLAN tagging
    IEEE 802.1X port authentication network control
    IEEE 802.1ab LLDP
    RFC 768 UDP
    RFC 793 TFTP
    RFC 791 IP
    RFC 792 ICMP
    RFC 2068 HTTP
    RFC 1112 IGMP version 1
    RFC 2236 IGMP version 2
    RFC 3376 IGMP version 3
    RFC 2710 MLD version 1
    FRC 3810 MLD version 2
    RFC 2328 OSPF v2
    RFC 1058 RIP v1
    RFC 2453 RIP v2
    Environment
    Operating Temperature: 0 ~ 50 degrees C
    Relative Humidity: 5 ~ 90% (non-condensing)
    Storage Temperature: -10 ~ 70 degrees C
    Relative Humidity: 5 ~ 90% (non-condensing)
    Ordering Information
    SGS-6340-48T4S Layer 3 48-Port 10/100/1000T + 4-Port 1000X SFP Stackable Managed Switch

Facebooktwittergoogle_pluspinterestlinkedinyoutube

SGS-6340-24T4S

box_SGS-6340-24T4S
SGS-6340-24T4S undefined
Layer 3 24-Port 10/100/1000T + 4-Port 1000X SFP Stackable Managed Switch
3icon_L3_RIP_Routing 2icon_L3-Static-Routing 4icon_L3_OSPF_Routing 1icon_IPv6-Management

  • Powerful Layer 3 Gigabit Routing Solution for Enterprise Backbone and Data Center Networking
    PLANET SGS-6340-24T4S is a Layer 3 Stackable Managed Gigabit Switch that provides high-density performance,Layer 3 static routing, RIP (Routing Information Protocol) and OSPF (Open Shortest Path First). With56Gbps switching fabric, the SGS-6340-24T4S can handle extremely large amounts of data in a secure topology linking to an enterprise backbone or high capacity servers. The powerful WRR (Weighted Round Robin) and Network Security features make the SGS-6340-24T4S perform effective data traffic control for ISP and enterprise VoIP, video streaming, and multicast applications.
    Layer 3 Routing Support
    The SGS-6340-24T4S enables the administrator to conveniently boost network efficiency by configuring Layer 3 static routing manually, the RIP (Routing Information Protocol) or OSPF (Open Shortest Path First) settings automatically. The RIP can employ the hop count as a routing metric and prevent routing loops by implementing a limit on the number of hops allowed in a path from the source to a destination. The maximum number of hops allowed for the RIP is 15. The OSPF is an interior dynamic routing protocol for autonomous system based on link-state. The protocol creates a link-state database by exchanging link-states among Layer3 switches, and then uses the Shortest Path First algorithm to generate a route table based on that database.

    Abundant IPv6 Support
    The SGS-6340-24T4S provides IPv6 management and enterprise-level secure features such as SSH, ACL, WRRand RADIUS authentication. The SGS-6340-24T4S thus helps the enterprises to step in the IPv6 era with the lowest investment. In addition, you don’t need to replace the network facilities when the IPv6 FTTx edge network is built.

    High Performance
    The SGS-6340-24T4S boasts a high-performance switch architecture that is capable of providing non-blocking switch fabric and wire-speed throughput as high as 56Gbps, which greatly simplifies the tasks of upgrading the LAN for catering to increasing bandwidth demands.

    Robust Layer 2 Features
    The SGS-6340-24T4S can be programmed for basic switch management functions such as port speed configuration, port aggregation, VLAN, Spanning Tree Protocol, WRR, bandwidth control and IGMP snooping. The SGS-6340-24T4S provides 802.1Q tagged VLAN, Q-in-Q, voice VLAN and GVRP Protocol. The VLAN groups allowed to be on the SGS-6340-24T4S will be maximally up to 256. By supporting port aggregation, the SGS-6340-24T4S allows the operation of a high-speed trunk combined with multiple ports. It enables up to 128 groups for trunking with a maximum of 8 ports for each group.

    Excellent Traffic Control
    The SGS-6340-24T4S is loaded with powerful traffic management and WRR features to enhance services offered by telecoms. The WRR functionalities include wire-speed Layer 4 traffic classifiers and bandwidth limitation which are particularly useful for multi-tenant unit, multi-business unit, Telco, or network service applications. It also empowers the enterprises to take full advantage of the limited network resources and guarantees the best in VoIP and video conferencing transmission.Powerful Security
    The SGS-6340-24T4S supports ACL policies comprehensively. The traffic can be classified by source/destination IP addresses, source/destination MAC addresses, IP protocols, TCP/UDP, IP precedence, time ranges and ToS. Moreover, various policies can be conducted to forward the traffic. The SGS-6340-24T4S also provides IEEE 802.1x port based access authentication, which can be deployed with RADIUS, to ensure the port level security and block illegal users.

    Efficient Management
    The SGS-6340-24T4S supports IP stacking function that helps network managers to easily configure up to 24 switches in the same series via one single IP address instead of connecting and setting each unit one by one. For efficient management, the SGS-6340-24T4S Managed Gigabit Switch is equipped with console, Web and SNMP management interfaces. With its built-in Web-based management interface, the SGS-6340-24T4S offers an easy-to-use, platform-independent management and configuration facility. The SGS-6340-24T4S supports standard Simple Network Management Protocol (SNMP) and can be managed via any standard-based management software. For text-based management, the SGS-6340-24T4S can be accessed via Telnet and the console port. Moreover, the SGS-6340-24T4S offers secure remote management by supporting SSH connection which encrypts the packet content at each session.

    Flexibility and Extension Solution
    The four mini-GBIC slots built in the SGS-6340-24T4S are compatible with 1000BASE-X and WDM SFP (Small Form-factor Pluggable) fiber-optic modules. The distance can be extended from 550 meters (multi-mode fiber) to 10/50/70/120 kilometers (single-mode fiber or WDM fiber). They are well suited for applications within the enterprise data centers and distributions.

    Ordering Information
    SGS-6340-24T4S Layer 3 24-Port 10/100/1000T + 4-Port 1000X SFP Stackable Managed Switch


  • Server Farm Switch
    The SGS-6340-24T4S provides up to 28 Gigabit Ethernet ports for enterprises and network servers. It is ideal to be used as a server farm switch connecting to servers. With its port trunking function, an 8GB fat pipe is provided for connecting to the backbone if required.
    undefined
    Enterprise Security and QoS Edge Switch
    With the IEEE 802.1x network access authentication, the SGS-6340-24T4S provides the MAC/IP/Protocol Access Control list and Port Security functions which can limit the number of MAC addresses to be passed through one specific port. The IGMP snooping and QoS features in the SGS-6340-24T4S improve the network efficiency and protect the network clients.
    Layer 3 VLAN Routing
    With the built-in robust Layer 3 traffic routing protocols, the SGS-6340-24T4S ensures reliable routing between VLANs and network segments. The routing protocols can be applied via VLAN interface. The SGS-6340-24T4S is certainly a cost-effective and ideal solution for enterprises.
    Ordering Information
    SGS-6340-24T4S Layer 3 24-Port 10/100/1000T + 4-Port 1000X SFP Stackable Managed Switch


  • Hardware Specifications
    Copper Ports 24 10/100/1000BASE-T RJ45 auto-MDI/MDI-X ports
    SFP/mini-GBIC Slots 4 1000BASE-X SFP interfaces
    Console 1 x RJ45-to-RS232 serial port (9600, 8, N, 1)
    Switch Architecture Store-and-forward
    Switch Fabric 56Gbps/non-blocking
    Switch Throughput 41.66Mpps
    Address Table 16K MAC address table with auto learning function
    Shared Data Buffer 1.5MB
    Flow Control Back pressure for half-duplex
    IEEE 802.3x pause frame for full-duplex
    Jumbo Frame 9KB
    LED System:
    PWR, SYS
    Ports:
    10/100/1000T RJ45 Port: LNK/ACT
    1000X SFP slot: LNK/ACT
    Dimensions (W x D x H) 442 x 220 x 44 mm, 1U height
    Weight 2340g
    Power Consumption 19.2 watts/65.51 BTU (maximum)
    Power Requirements AC 100~240V, 50/60Hz
    Management Function
    System Configuration Console, Telnet, SSH, Web browser, SNMP v1, v2c and v3
    Management Supports both IPv4 and IPv6 addressing
    Supports the user IP security inspection for IPv4/IPv6 SNMP
    Supports MIB and TRAP
    Supports IPv4/IPv6 FTP/TFTP
    Supports IPv4/IPv6 NTP
    Supports RMON 1, 2, 3, 9 four groups
    Supports the RADIUS authentication for IPv4/IPv6 Telnet user name and password
    Supports IPv4/IPv6 SSH
    The right configuration for users to adopt RADIUS server’s shell management
    Supports CLI, console, Telnet
    Supports SNMP v1, v2c and v3
    Supports Security IP safety net management function: avoid unlawful landing at nonrestrictive area
    Supports Syslog server for IPv4 and IPv6
    Supports TACACS+
    Layer 3 Function
    Routing Protocol Static routing, RIP and OSPF
    Routing Table 128
    Layer 2 Function
    Port Configuration Port disable/enable
    Auto-negotiation 10/100/1000Mbps full and half duplex mode selection
    Flow control disable/enable
    Bandwidth control on each port
    Port loopback detect
    Port Status Display each port’s speed duplex mode, link status, flow control status and
    auto negotiation status
    VLAN 802.1Q tagged based VLAN, up to 256 VLAN groups
    802.1ad Q-in-Q (VLAN stacking)
    GVRP for VLAN management
    Private VLAN Edge (PVE) supported
    Protocol-based VLAN
    MAC-based VLAN
    IP subnet VLAN
    Bandwidth Control TX/RX/both
    Link Aggregation IEEE 802.3ad LACP/static trunk
    Supports 128 groups with 8 ports per trunk group
    QoS 8 priority queues on all switch ports
    Supports strict priority and Weighted Round Robin (WRR) CoS policies
    Traffic classification:
    – IEEE 802.1p CoS/ToS
    – IPv4/IPv6 DSCP
    – Port-based WRR
    Multicast IGMP v1/v2/v3 snooping
    Querier mode support
    MLD v1/v2 snooping
    Multicast VLAN Register (MVR)
    Access Control List Supports Standard and Expanded ACL
    IP-based ACL/MAC-based ACL
    Time-based ACL
    Up to 512 entries
    Bandwidth Control At least 64Kbps step
    Security Supports MAC + port binding
    IPv4/IPv6 + MAC + port binding
    IPv4/IPv6 + port binding
    Supports MAC filter
    ARP scanning prevention
    Authentication IEEE 802.1x port-based network access control
    AAA authentication: TACACS+ and IPv4/IPv6 over RADIUS
    SNMP MIBs RFC 1213 MIB-II
    RFC 1215 Internet Engineering Task Force
    RFC 1271 RMON
    RFC 1354 IP-Forwarding MIB
    RFC 1493 Bridge MIB
    RFC 1643 Ether-like MIB
    RFC 1907 SNMP v2
    RFC 2011 IP/ICMP MIB
    RFC 2012 TCP MIB
    RFC 2013 UDP MIB
    RFC 2096 IP forward MIB
    RFC 2233 if MIB
    RFC 2452 TCP6 MIB
    RFC 2454 UDP6 MIB
    RFC 2465 IPv6 MIB
    RFC 2466 ICMP6 MIB
    RFC 2573 SNMP v3 notify
    RFC 2574 SNMP v3 vacm
    RFC 2674 Bridge MIB Extensions (IEEE 802.1Q MIB)
    RFC 2674 Bridge MIB Extensions (IEEE 802.1P MIB)
    Standard Conformance
    Regulatory Compliance FCC Part 15 Class A, CE
    Standards Compliance IEEE 802.3 10BASE-T
    IEEE 802.3u 100BASE-TX
    IEEE 802.3z Gigabit 1000BASE-SX/LX
    IEEE 802.3ab Gigabit 1000BASE-T
    IEEE 802.3x flow control and back pressure
    IEEE 802.3ad port trunk with LACP
    IEEE 802.1D Spanning Tree Protocol
    IEEE 802.1w Rapid Spanning Tree Protocol
    IEEE 802.1s Multiple Spanning Tree Protocol
    IEEE 802.1p Class of Service
    IEEE 802.1Q VLAN tagging
    IEEE 802.1X port authentication network control
    IEEE 802.1ab LLDP
    RFC 768 UDP
    RFC 793 TFTP
    RFC 791 IP
    RFC 792 ICMP
    RFC 2068 HTTP
    RFC 1112 IGMP v1
    RFC 2236 IGMP v2
    RFC 3376 IGMP v3
    RFC 2710 MLD v1
    FRC 3810 MLD v2
    RFC 2328 OSPF v2
    RFC 1058 RIP v1
    RFC 2453 RIP v2
    Environment
    Operating Temperature: 0 ~ 50 degrees C
    Relative Humidity: 5 ~ 90% (non-condensing)
    Storage Temperature: -10 ~ 70 degrees C
    Relative Humidity: 5 ~ 90% (non-condensing)
    Ordering Information
    SGS-6340-24T4S Layer 3 24-Port 10/100/1000T + 4-Port 1000X SFP Stackable Managed Switch

Facebooktwittergoogle_pluspinterestlinkedinyoutube