Planet

GSW-1600HP

box_GSW-1600HP
GSW-1600HP
16-Port 10/100/1000Mbps 802.3at PoE+ Ethernet Switch
4icon_poe 8icon_802.3at_802.3af 7icon_10M_100M_1000M 2icon_30W_PoE 6icon_kg 6icon_jumbo_frame


  • Centralized Power Management for Gigabit Ethernet PoE Networking
    To facilitate high power PoE network applications with Gigabit speed transmission, the GSW-1600HP 16-Port Gigabit High Power over Ethernet Switch features high performance Gigabit IEEE 802.3af PoE (Up to 15.4W) and IEEE 802.3at High-Power PoE (Up to 30.8W) capabilities on all ports. By offering reliable switching technology and advanced networking features, the GSW-1600HP optimizes the installation and power management of network devices such as wireless access points (AP), VoIP phones, and security video cameras. It also eliminates time and cost of deployment by integrating power and data switching into one unit, and freeing network devices from restrictions of power outlet locations and the additional AC wiring.
     

    Perfect Integrated Solution for PoE IP Surveillance
    The GSW-1600HP brings an ideal secure surveillance system at a lower total cost. The GSW-1600HP provides 16 10/100/1000Mbps 802.3at PoE port able to feed sufficient PoE power for 16 IEEE 802.3af / IEEE 802.3at PoE IP cameras at the same time. It is also able to connect with one 16-Channel NVR or two 8-Channel NVR systems, uplink to backbone switch and the monitor center. With such high performance switch architecture, the recorded video files from the PoE IP Cameras can be saved in the NVR system via which the administrators can control and monitor the surveillance images both in the local LAN and the remote sites.

    Energy-Saving Design
    The GSW-1600HP uses new engine that incorporates two advanced Green Networking technologies:
    ■ Idle Mode Link Down power saving
    ■ Intelligent Scales Power based on cable length
    The Idle mode Link Down power saving of the GSW-1600HP complies with Pre-IEEE 802.3az Energy Efficient Ethernet (EEE) standard to automatically lower power for a given port when it is not linked. The Intelligent Scales Power technology actively determines the appropriate power level based on the cable length. When connecting to the GSW-1600HP with Ethernet cable shorter than 20m, a device can obtain maximum power saving because the GSW-1600HP would automatically detect the Ethernet cable length and reduce power usage. The connected device can substantially reduce overall power consumption, which makes a significant contribution to energy saving.

    Easy Installation & Cable Connection
    Providing data transfer and High Power PoE in one unit, the GSW-1600HP is able to reduce the need of extension cables and dedicated electrical outlets on the wall, ceiling or any unreachable place. It helps to lower the installation costs and simplify the installation effort. All RJ-45 copper interfaces of the GSW-1600HP supports 10/100/1000Mbps auto-negotiation for optimal speed detection through RJ-45 Category 6, 5 or 5e cables. It also supports standard auto-MDI/MDI-X that can detect the type of connection to any Ethernet device without requiring special straight or crossover cables.

    Ordering Information
    GSW-1600HP 16-Port 10/100/1000Mbps 802.3at PoE+ Ethernet Switch


  • Department / Workgroup PoE Network
    Providing 16-port PoE in-line power interfaces, the GSW-1600HP can easily build a power centrally-controlled IP phone system, IP Camera system and Wireless AP group for the enterprise. Cameras can be installed around the corner in the company or campus for surveillance demands. Without the power-socket limitation, the GSW-1600HP makes the installation of cameras easier and more efficient.
    Ordering Information
    GSW-1600HP 16-Port 10/100/1000Mbps 802.3at PoE+ Ethernet Switch


  • Hardware Specification
    Network Port 16 10/100/1000Base-T auto-MDI/MDI-X RJ-45 ports
    PoE Inject Port 16-Port with 802.3af / 802.3at PoE injector function
    LED Display System
    Power (Green)
    PoE Ethernet Interfaces
    PoE In-Use (Orange)
    10/100/1000Base-T Ports
    1000 (LNK/ACT, Green), 10/100 (LNK/ACT, Orange)
    Switch Architecture Store and Forward switch architecture
    MAC Address 8K MAC address table with auto learning function
    Switch Fabric 32Gbps
    Switch Throughput 23.8Mpps@64Bytes
    Jumbo Packet Size 9K Bytes
    Flow Control Back pressure for half-duplex. IEEE 802.3x pause frame for full-duplex
    Power Requirements AC 100~240V, 50/60Hz, 3.5A max.
    Power Consumption Max. 260 watts / 885 BTU
    Dimensions (W x D x H) 445 x 207 x 45 mm (1U height)
    Weight 2.54kg
    Power over Ethernet
    PoE Standard IEEE 802.3af Power over Ethernet / PSE
    IEEE 802.3at Enhancement Power over Ethernet / PSE
    PoE Power Output Per Port 52V DC, 300mA. max. 15.4 watts (IEEE 802.3af)
    Per Port 52V DC, 590mA. max. 30 watts (IEEE 802.3at)
    PoE Power Budget 220 watts
    Number of PD, 7Watts 16
    Number of PD, 15.4Watts 14
    Number of PD, 30.8Watts 7
    Environment
    Operating environment 0 ~ 50 degrees C
    Storage environment -40 ~ 70 degrees C
    Operating Humidity 5 ~ 95%, relative humidity, non-condensing
    Storage Humidity 5 ~ 95%, relative humidity, non-condensing
    Standard Conformance
    Standard Compliance
    IEEE 802.3
    IEEE 802.3u
    IEEE 802.3x
    IEEE 802.3af
    IEEE 802.3at
    IEEE 802.3az
    Ethernet
    Fast Ethernet
    Flow Control
    Power over Ethernet
    Enhanced Power over Ethernet
    Pre-Energy-Efficient Ethernet
    Regulation Compliance FCC Class A, CE
    Ordering Information
    GSW-1600HP 16-Port 10/100/1000Mbps 802.3at PoE+ Ethernet Switch
Facebooktwittergoogle_pluspinterestlinkedinyoutube

BSP-300

box_BSP-300
BSP-300
Industrial Solar Power PoE Switch
Green_Networkng 0icon_PWM 7icon_10M_100M_1000M 4icon_DIN_Rail 2icon_IP-Code_30 2icon_30W_PoE

  • Industry-leading Integration of PoE Technology and Solar Power System
    For the increasing demand of network installation anywhere, the PLANET BSP-300 Industrial Solar Power PoE Switch now provides the ideal solution. Powered by Zero-Carbon emission source — the sunlight, the BSP-300 incorporates Pulse Width Modulated (PWM) charge controllers to effectively force the solar panels to operate at the same voltage as the battery bank during charging. The BSP-300 can empower the high power PoE network devices anywhere without any obstacles of geographical barrier.

    With the integration of the IEEE 802.3at PoE technology and solar power system, the BSP-300 provides hassle-free and maintenance-free solution for those in need for fast connectivity that requires great flexibility and reliability, such as remote monitoring and long distance wireless communication. The BSP-300 makes the network deployment easier and more reliably.

    Plug and Play High Power PoE Network Deployment
    Through its two IEEE 802.3at Gigabit High Power PoE interface delivering power to wireless access points and IP cameras, the BSP-300 makes it easy to realize far-reaching data transmission and IP surveillance in remote areas. Just simply Plug and Play, the 802.3at / 802.3af PoE wireless LAN and IP surveillance system can be constructed easily without additional wiring.
    Zero-Carbon and Stable Power Supply
    The BSP-300 utilizes the solar power sourcing and co-works with the common nickel-cadmium battery or lead-acid battery to form an independent solar power supply system for outdoor network system. The BSP-300 delivers zero-carbon and uninterruptible power supply for continuous outdoor wireless and IP surveillance applications without the need of any cabling. This system saves 100% power loss for users. It can power the client devices and charging at the same time during the day and continuing the operation in the night with the co-working battery.
    Application Sites
    • Forest / National Park Monitoring
    • Public Surveillance / Public Wireless LAN System
    • Telecom / ISP Wireless Extension
    • Hospital / Remote Health Care
    • Village / Resort
    • Harbor / Oil Rig / Mine Industry
    • Instant Network Infrastructure for Critical Mission
    Ordering Information
    BSP-300 Industrial Solar Power PoE Switch


  • Solar PoE Power Supply for Long Distance Wireless Surveillance Solution
    Providing Plug-and-Play instant Internet Service, the BSP-300 can be deployed anywhere in the city where there is need of Wireless Internet Connection. With the two 802.3at / 802.3af PoE interfaces, the BSP-300 enables you to install the PoE access point such as PLANET PoE Wireless Outdoor AP and PoE IP Cameras in any place of the city where there is no direct AC electricity. Just connect the PoE wireless access points or IP cameras to the BSP-300 and the wireless LAN or surveillance system can be deployed immediately.
    When functioning with a pair of serial over Ethernet media converters and the wireless transmission, the BSP-300 Industrial Solar Power PoE Switch can be efficiently managed from remote monitor center.
    Ordering Information
    BSP-300 Industrial Solar Power PoE Switch


  • Hardware Specifications
    Network Connector 3-Port RJ-45 for 10/100/1000Base-T
    (2-Port with 802.3at / 802.3af PoE injector function)
    Console Port 1 x RS-232 RJ-45 serial port
    Power Output 1 x DC out 24@ 2A maximum (two-pin terminal block)
    2 x PoE out 52VDC; max. 30 watts per PoE port
    LED System
    • System (Green)
    • Fault (Green)

    Per PoE Port (Port 1 / Port 2)
    • Link / Active (Green)
    • PoE In-Use (Orange)

    LAN Port (Port 3)
    • 1000 Link / Active (Green)
    • 10/100 Link / Active (Green)

    Per PoE Interface
    • Power LNK/ACT (Green)
    • PoE In-Use (Orange)

    Power over Ethernet
    Standard IEEE802.3at / IEEE802.3af
    Port Port 1, Port 2
    Power Pin RJ-45 Pin# 1/2 (+); Pin# 3/6 (-); PSE End-span
    Power Voltage Injecting DC 52V
    Consumption 30 watts max.; PoE Class 4
    Electrical Characteristics
    System Voltage Ratings DC 24V
    Maximum Charging Current 15A
    Max. Solar Array VOC DC 60V
    Max. Operating Voltage DC 45V
    Total Current Consumption While operating -32Ma
    At idle -11mA
    High Temperature Shutdown 100 degrees C disconnect solar and load
    80 degrees C reconnect solar and load
    Overload Capacity Over 15 Amp will cut off output load
    Battery Charging Characteristics
    Charge Algorithm Bulk charge (constant current), absorption charge (constant voltage) and floating charge. Absorption and floating charge with PWM protection.
    Maximum Output Current 15A
    Nickel-cadmium Battery ± 40 mV/degrees Celsius for NiCad type batteries, charge cut-off @ 55 degrees C
    (Temperature compensation Baseline@ 25 degrees C)
    Lead-acid Battery (Default Setting) ± 60 mV/degrees Celsius for lead acid type batteries, charge cut-off @ 55 degrees C
    (Temperature compensation Baseline@ 25 degrees C)
    Float Charge Voltage DC 27.2V (26.0~30.0V)
    Absorption Charge Voltage DC 29.2V (28.0~32.0V)
    LVD (Low Voltage Disconnection) DC 22.2V (21.0~25.0V)
    LVR (Low Voltage Reconnection) DC 24.8V (23.0~27.0V)
    Standards Conformance
    Computer Interface IEEE 802.3 10Base-T
    IEEE 802.3u 10/100Base-TX
    IEEE 802.3ab 10/100/1000Base-T
    IEEE 802.3at / 802.3af for PoE (Power over Ethernet) devices
    Regulation Compliance CE, FCC
    System Unit
    Operating Temperature -20 ~ 60 degrees C
    Storage Temperature -40 ~ 90 degrees C
    Operating Humidity 20% ~ 80%
    Dimensions (W x D x H) 107.2 x 152 x 65.7 mm
    Weight 0.79kg
    Installation DIN rail kit and wall mount kit
    Software Utility Device detect / diagnostic, Windows XP / Win 7
    Ordering Information
    BSP-300 Industrial Solar Power PoE Switch

Facebooktwittergoogle_pluspinterestlinkedinyoutube

ICA-1200

box_ICA-1200
ICA-1200
4-Slot Layer 3 IPv6/IPv4 Routing Chassis Switch
4icon_1080_FULL-HD 0icon_PIR 1icon_IPv6-Management 4icon_poe 1icon_WDR 6icon_Micro-SD

  • Cost-effective Solution to Full HD Surveillance
    PLANET ICA-1200 Cube IP Camera with IR Illuminator performs high resolution images for the round-the-clock surveillance over IP networks. It supports H.264, MPEG-4, and JPEG compression formats to deliver excellent picture quality in Full HD resolutions at 30 frames per second (fps). Incorporating the new Exmor™ CMOS image sensor, the ICA-1200 provides high quality images under all lighting conditions. It is perfect for remote and discreet monitoring of indoor areas such as homes, small businesses, boutiques, restaurants, hotels, residences, etc.
    Day & Night Surveillance
    The ICA-1200 brings the clearest vision at night by featuring 0.5 lux illumination and the 12 red-light LEDs built around the lens. It offers color pictures both in the daytime and nighttime with the built-in CMOS sensor supporting up to 5~10 meters. The ICA-1200 also uses new High-Light LED to provide greater performance in the dark and longer life of LED.
     

    Exceptional Image Quality
    Together with powerful image processing attributes like Wide Dynamic Range (WDR) and 3D Digital Noise Reduction (3DNR) technology, the ICA-1200 is able to filter the intense backlight surrounding a subject and remove noises from video signal. Thus, it brings an extremely clear and exquisite picture quality even under any challenging lighting conditions.

     

    Passive InfraRed (PIR) Sensor
    The ICA-1200 is designed with a built-in Passive InfraRed (PIR) motion detection sensor able to detect movement far from 6 meters away. When people pass by or an emergency happens in the specified areas, the ICA-1200 will “detect” and start recording automatically. With the additional function of alarm notification, it can send an e-mail alert or the captured images via FTP upload to a designated storage server.

     

    Advanced Event Management
    Supporting Store-to-NAS function, the ICA-1200 can work alone and save the video file to a NAS directly, which can save the PC resource and keep monitoring the environment with motion detection at 7/24. It also offers 2-way audio surveillance; therefore, the administrator can speak to anyone at the ICA-1200 remote site with a speaker connected. In addition, the ICA-1200 supports inputs/outputs to connect with external devices such as door sensors and relays to activate light or closed doors.

     

    Flexible Installation and Power Functionality
    The ICA-1200 incorporates IEEE 802.3af Power over Ethernet standard and is able to be powered via the network cable from a PoE power sourcing equipment such as PoE Switch and PoE injector. It thus eliminates the need for extra power cables and reduces installation costs while increases the deployment flexibility. The ICA-1200 is ONVIF compliant and interoperable with other brands in the market. It also includes 64-CH central management software for ease of maintenance and remote monitoring. The ICA-1200 is indisputably the ideal choice for reliable and high performance surveillance.

    Ordering Information
    ICA-1200 Full HD PoE Cube IP Camera


  • PLANET ICA-1200 is a highly cost-effective network camera designed for home monitoring. It provides clear identification of objects and people, so it perfectly meets surveillance needs from all aspects such as small businesses, boutiques, restaurants, hotels, residences, etc.
    Ordering Information
    ICA-1200 Full HD PoE Cube IP Camera


  • Camera
    Image device 1/2.9″ Sony Exmor Progressive CMOS
    Lens 4.2 mm, fixed iris, fixed focus
    Angle of view : horizontal: 56 degrees / vertical: 43 degrees
    Effective Pixels 1920 x 1080 pixels (16:9)
    Min Illumination 0.5 lux @ F1.2
    LED IR LED x 12, 850nm
    Built-in IR illuminators, effective up to 5~10 meters
    PIR Sensor Built-in 6m/120 degrees Coverage
    Video
    Video Encoder H.264 / MPEG-4 / M-JPEG
    Video Resolution 1080P mode
    H.264: 1080P / 640 x 360 / 672 x 352 / 320 x 180 / 160 x 90
    M-JPEG: 1080P / 640 x 360 / 320 x 180 / 160 x 90
    MPEG4: 1080P / 640 x 360 / 320 x 180 / 160 x 90

    720P mode
    H.264: 1280 x 720 / 640 x 368 / 640 x 360 / 160 x 90
    M-JPEG: 1280 x 720 / 640 x 360 / 160 x 90
    MPEG-4: 1280 x 720 / 640 x 360 / 160 x 90

    Frame Rate Up to 30fps for all resolutions
    Image Setting AE, AWB
    3D Noise Reduction
    WDR
    Color, Brightness, Sharpness, Contrast, Hue
    Mirror / Flip
    10 Privacy Masks
    Text, Time and Date Overlay
    Streaming Simultaneous multi-profile streaming
    Streaming over UDP, TCP, or HTTP
    M-JPEG streaming over HTTP (server push)
    Supports 3GPP mobile surveillance (MPEG4)
    Controllable frame rate and bandwidth
    Constant and variable bit rate (MPEG4 / H.264)
    ROI
    Audio
    Audio Streaming 2-way audio
    Audio Compression RTSP: G.711 64kbps, G.726 32kbps
    3GPP: AMR
    Microphone Built-in microphone and speaker input
    Audio Output Adjustable audio output gain
    Network and Configuration
    Network Standard IEEE 802.3 10Base-T
    IEEE 802.3u 100Base-TX
    Network Protocol IPv4, IPv6, TCP/IP, UDP, HTTP, HTTPS, SMTP, FTP, NTP, DNS, DDNS, DHCP, ARP, Bonjour, UPnP, RTSP, RTP, RTCP, IGMP, PPPoE, 3GPP, ICMP, Samba
    Security Password protection, IP address filtering, HTTPS encrypted data transmission, user access log
    Users 20 clients on-line monitoring at the same time
    System Integration
    Application Programming Interface Open API for software integration
    ONVIF
    Alarm Triggers Intelligent Video Motion Detection
    External Input
    PIR detector (Human Detect)
    Audio detection
    Alarm Events File upload via FTP, Samba, SD card or email
    Notification via email, HTTP, and TCP
    External output activation
    Audio alert output
    Video Buffer Pre and post alarm buffering
    Environment
    Power Requirement 12V DC, 1A
    IEEE 802.3af (Power over Ethernet) Class 3
    Power Consumption 6W (12VDC)
    Operating Temperature -10 ~ 40 degrees C
    Operating Humidity 20 ~ 80% (non-condensing)
    Dimension (W x D x H) 58 x 39 x 91 mm
    Weight 146g
    Emission CE, FCC
    Connectors 10/100 Mbps Ethernet, RJ-45
    DC power jack
    Terminal block for 1 alarm input and 1 output
    Audio out
    TV out
    Micro SD/SDHC card (max 32GB, Class 6)
    Factory default reset
    Ordering Information
    ICA-1200 Full HD PoE Cube IP Camera

Facebooktwittergoogle_pluspinterestlinkedinyoutube

GTP-80x Series

box_GTP-80x
GTP-80x Series
1000BASE-X to 10/100/1000BASE-T 802.3at PoE Media Converter
4icon_poe 8icon_802.3at_802.3af_Mid-span 6icon_kg 7icon_10M_100M_1000M 0icon_SFP 7icon_fiber_optical

  • The Best Data Link and Power Sourcing Solution
    As more and more PoE PD devices need higher power input and long-distance transmission, PLANET has released a new Power over Ethernet Media Converter, GTP-80x series. With the brand-new IEEE 802.3at High Power over Ethernet technology applied, the GTP-80x series provides the following key features:
    ■ IEEE 802.3at / IEEE 802.3af PoE standard compliance
    ■ Supports a maximum of 30 watts output power
    ■ 10/100/1000Mbps duplex mode supports on 1000BASE-T port
    ■ 1000Mbps Fiber-Optic support

    The GTP-80x series is a Single-Port, Mid-Span IEEE 802.3at High Power over Ethernet converter designed specifically to satisfy the growing demand for higher power required network equipment such as PTZ (Pan, Tilt & Zoom) network cameras, PTZ speed dome, color touch-screen VoIP telephones, multi-channel (IEEE 802.11a / b / g / n) wireless LAN access points and other network devices that need higher power to function normally. TheGTP-80x High Power over Ethernet converter series is an ideal solution to delivering data and power to network devices directly via the RJ45 Port interface without the need for installing extra power outlets and electrical cabling.

     

    Fiber-Optic Link Capability Extends the Range of Network Deployment
    The maximum distance between the PoE PSE and PD is 100 meters. To extend the network device deployment range, the GTP-80x is integrated with Fiber interface. The GTP-80x PoE+ Media Converter is used to convert optical Ethernet signal to electrical Ethernet signal that allows two types of segments to connect easily, efficiently and inexpensively. It can convert 10/100/1000BASE-T signal to 1000BASE-X one and provide the diverse options of fiber connecting types to meet different network applications.
    The GTP-80x series and its fiber connecting type includes:
    ■ GTP-802:SC Fiber Interface with Multi-mode, Distance up to 220m and 550m
    ■ GTP-802S:SC Fiber Interface with Single-mode, Distance up to 10km
    ■ GTP-805A:LC Fiber Interface, supports Multi / Single Mode SFP module, Distance up to 120km max. (Varting on SFP module)
    With the long Fiber distance support, it still sustains the transmission performance as high as 1000Mbps. It works in high performance Store and Forward mechanism, and also can prevent packet loss with IEEE 802.3x Flow Control (Full-Duplex) and the LFP (Link Fault Pass through function) (LLCF/LLR) with the DIP Switch design. Furthermore, it can immediately alarm the administrators the issue from the link media and provide efficient solution to monitoring the network power usage.

    Quick and Easy High Power PoE Network Deployment
    The GTP-80x series provides 52V DC power over Ethernet cables — just insert DC voltage into Cat.5/5e/6 cable, allowing the cable between the PoE splitters (POE-151S / POE-152S / POE-162S) to transfer data and power simultaneously for up to 100 meters. Then it will spilt the digital data and the power into two kinds of selectable DC outputs (5V DC / 12V DC) or (12V DC / 24V DC).Thus, it reduces cables and the dedicated electrical outlets on the wall, ceiling or any unreachable place. Most of all, it also eliminates the time for installation. The high Power over Ethernet solution frees the security IP camera and wireless AP deployment from restrictions of power outlet locations.

    Ordering Information
    GTP-802 1000BASE-X to 10/100/1000BASE-T 802.3at PoE Media Converter (SC,MM) -550m
    GTP-802S 1000BASE-X to 10/100/1000BASE-T 802.3at PoE Media Converter (SC,SM) -10km
    GTP-805A 1000BASE-X to 10/100/1000BASE-T 802.3at PoE Media Converter (mini-GBIC, SFP)


  • Flexible and User-Friendly PoE Deployment
    For the places difficult to find the power outlet, the GTP-80x series provides the easiest way to power your Ethernet devices such as PLANET IEEE 802.3at / IEEE 802.3af PoE splitter (POE-151S / 152S / 162S) and non PoE compliant Internet camera or wireless PoE access point. For instance, users can flexibly install the security IP camera, wireless access point and other IEEE 802.3at / IEEE 802.3af compliant network equipment around the corner in the public areas such as station or freeway for surveillance demands, or build a wireless roaming environment on the campus or at the airport.
    Ordering Information
    GTP-802 1000BASE-X to 10/100/1000BASE-T 802.3at PoE Media Converter (SC,MM) -550m
    GTP-802S 1000BASE-X to 10/100/1000BASE-T 802.3at PoE Media Converter (SC,SM) -10km
    GTP-805A 1000BASE-X to 10/100/1000BASE-T 802.3at PoE Media Converter (mini-GBIC, SFP)


  • Interface
    Copper 10/100/1000BASE-T Ethernet TP interface
    Auto-negotiation, Auto MDI/MDI-X with PoE injector function
    Fiber GTP-802
    Multi-mode: 50/125um or 62.5/125um optic fiber
    GTP-802S
    Single-mode: 9/125um optic fiber
    GTP-805A
    Varying on SFP Module
    Fiber Port Type (connector) GTP-802: SC
    GTP-802S: SC
    GTP-805A: SFP(LC)
    Cable Distance GTP-802: 220m & 550m
    GTP-802S: 10km
    GTP-805A: Varying on SFP Module
    Optical Frequency GTP-802: 850nm
    GTP-802S: 1310nm
    GTP-805A: Varying on SFP Module
    Launch Power(dBm) GTP-802:
    Max. -4
    Min. -9.5
    GTP-802S:
    Max. -3
    Min. -9.5
    GTP-805A: Varying on SFP Module
    Receive Sensitivity GTP-802: -13.5
    GTP-802S: -14.4
    GTP-805A: Varying on SFP Module
    Maximum Input power GTP-802: -18
    GTP-802S: -20
    GTP-805A: Varying on SFP Module
    Power Over Ethernet
    PoE Output IEEE 802.3af Power over Ethernet standard
    IEEE 802.3at Power over Ethernet enhancements standard
    Power Output PoE 52V DC, max. 30 watts
    PoE Power Supply Type Mid-Span
    Power Pin Assignment 4/5(+), 7/8(-)
    PoE Power Budget 30 watts
    Hardware Specifications
    Switch Architecture Store-and-Forward
    Flow Control Back pressure for half duplex mode
    IEEE 802.3x Pause frame for full duplex mode
    Maximum Frame Size 9K
    LED System: PWR
    Fiber 1000BASE-X: LNK / ACT
    TP 10/100/1000BASE-T: LNK / ACT
    PoE: Power in-use
    Dimensions (W x D x H) 70 x 94 x 26 mm
    Weight 0.21kg
    Power Supply 52V DC, 0.58A External AC-to-DC adapter
    LFP mode Enable: when either TP port or Fiber port is broken, automatically shut down the other port
    Disable: Link LED indicators still on if the other end’s connection is broken
    Standards Conformance
    Regulation Compliance FCC Part 15 Class A, CE
    Protocols and Standards Compliance IEEE 802.3 Ethernet
    IEEE 802.3u Fast Ethernet
    IEEE 802.3ab Gigabit Ethernet
    IEEE 802.3z Gigabit Ethernet over Fiber-Optic
    IEEE 802.3x Flow Control
    IEEE 802.3af Power over Ethernet.
    IEEE 802.3at Power over Ethernet enhancements standard
    Cables TP: Cat 5 / 5e / 6 UTP cable
    Fiber: Multi-mode: 50/125um or 62.5/125um optic fiber
    Single-mode: 9/125um optic fiber
    Environment
    Temperature 0 ~ 50 degrees C
    Humidity 5 ~ 90% (non-condensing)
    Ordering Information
    GTP-802 1000BASE-X to 10/100/1000BASE-T 802.3at PoE Media Converter (SC,MM) -550m
    GTP-802S 1000BASE-X to 10/100/1000BASE-T 802.3at PoE Media Converter (SC,SM) -10km
    GTP-805A 1000BASE-X to 10/100/1000BASE-T 802.3at PoE Media Converter (mini-GBIC, SFP)

Facebooktwittergoogle_pluspinterestlinkedinyoutube

HPOE-2400G

box_HPOE-2400G
HPOE-2400G
24-Port Gigabit IEEE 802.3at High Power over Ethernet Injector Hub
1icon_PoE-Schedule 5icon_802_3af_mid 3icon_802.3at_Mid-span 7icon_10M_100M_1000M 4icon_plug_play 6icon_kg

  • Highly cost-effective upgrade for HPOE-2400G – More PoE budget!!!
    PLANET HPOE-2400G, the next generation 24-Port Gigabit IEEE 802.3at High Power PoE Web Management Injector Hub, features both IEEE 802.3af and High Power IEEE 802.3at Power over Ethernet (PoE) that combines up to 30-watt power output and data per port over one CAT 5E/6 Ethernet cable. It is designed specifically to satisfy the growing demand for higher power consuming network PD (powered devices) such asPTZ (Pan, Tilt & Zoom) / Speed Dome network cameras, multi-channel (802.11a/b/g/n) wireless LAN access points and other network devices by providing double amount of PoE power, more than the conventional 802.3af PoE PSE.

    PLANET HPOE-2400G, the 24-port Gigabit IEEE 802.3at High Power PoE Web Management Injector Hub, features both IEEE 802.3af and High Power IEEE 802.3at Power over Ethernet (PoE) that combines up to 30-wattpower output and data per port over one CAT 5E/6 Ethernet cable. It is designed specifically to meet the growing demand of higher power consuming network PD (powered devices) such as PTZ (Pan, Tilt & Zoom) / speed dome network cameras, multi-channel (802.11a/b/g/n) wireless LAN access points and other network devices by providing double amount of PoE power than the conventional 802.3af PoE PSE.

     

    IEEE 802.3at PoE Standard Compliance
    Till today, the IEEE 802.3af Power over Ethernet Standard has become popular yet the PoE demand still grows for increasing network-powered applications. With many critical applications increases, the demand for higher power appears. Hence, the IEEE 802.3at Power over Ethernet standard is defined to allow delivery of maximum up to 30-watt input power to per PoE device. The IEEE 802.3at PoE standard is an ideal solution to meeting the high power requirements directly via the RJ-45 Port interface. Compliant with IEEE 802.3at, the HPOE-2400G possesses stronger power capability than the existing 802.3af PoE PSE.

     

    Intelligent Powered Device Alive Check
    PLANET R&D team is here to improve and create new Managed PoE products, adopting not only Power over Ethernet technology, but also automated PD (powered device) monitoring and real-time PoE status. The HPOE-2400G can be configured to monitor connected PD status in real-time via ping action. Once the PD stops working and responding, the HPOE-2400G will recycle the PoE port power and bring the PD back to work. It will greatly enhance the network reliability through the PoE port resetting the PD’s power source and reducing administrator management burden.

     

    PoE Schedule for Energy Saving
    Under the trend of energy saving worldwide and contribute to environment protection on the earth, the HPOE-2400G can effectively control the power supply besides its capability of giving high watts power. The “PoE schedule” function helps you to enable or disable PoE power feeding for each PoE port during specified time intervals and it is a powerful function to help SMBs or enterprises save power and money.

     

    Advanced Power Management
    To facilitate power management, the HPOE-2400G comes with powerful PoE management features such as over temperature protection, usage threshold alert and auto power allocation to prevent power budget overloading. The PoE power budget can be allocated by priorities or classification and sent alert event logs when power usage reaches the defined threshold. The HPOE-2400G enables centralization of the power supply and optimizes the installation and power management of remote network devices; therefore, it eliminates costs for additional AC wiring and reduces installation time.

     

    Quick and Easy PoE Network Deployment
    The HPOE-2400G complies with IEEE 802.3, IEEE 802.3u, IEEE 802.3ab, IEEE 802.3af standards and IEEE 802.3at standard. With 24 10/100/1000Base-T Gigabit Ethernet ports, the HPOE-2400G supports 52V DC power for any remote 802.3af / 802.3at powered device (PD). Supporting PoE power budget of 460 Watts, the HPOE-2400G provides sufficient 15.4 / 30.8-watt PoE power to up to 24 remote PD devices.

     

    Easy Cabling Installation
    The HPOE-2400G is installed between a regular Ethernet Switch and the powered devices; it injects power to the PDs without affecting data transmission performance. It offers a cost effective and quick solution to upgrading network system to IEEE 802.3af/IEEE 802.3at Power over Ethernet system without replacing the existing Ethernet Switch. There are 48 RJ-45 STP ports on the front panel of the POE-2400G, of which the 24 ports are on the lower stack function as “Data input” and the other 24 ports are on the upper stack function as “PoE (Data and Power) output”. The 24 “PoE output” ports are also the power injectors that transmit DC voltage to the CAT 5/5e/6 cable and transfer data and power simultaneously between the Injectors and Splitters.

     

    Friendly Web Management Interface
    To efficiently manage the powered devices, the HPOE-2400G provides simple Web management interface in which administrators can control the functions including port Enable / Disable, port priority, system configuration, change of User Name/Password and smart features for powered devices. The PoE injector hub can automatically detect the power status of each port and show messages on its Web management interface. These features also provide users with a cost-effective way to manage the device via Internet whenever they are at work or at home.

    Ordering Information
    HPOE-2400G 24-Port Gigabit IEEE 802.3at Power over Ethernet Injector Hub (720W)


  • Gigabit PoE Network Deployment
    The HPOE-2400G provides the easiest way to power your Ethernet devices such as IP camera on the ceiling and the wireless access point installed on the top of the building. With 24 10/100/1000Base-T Gigabit Ethernet ports, the HPOE-2400G supports full 52V DC power for any remote IEEE 802.3af / 802.3at powered device (PD).

    To control the power system of your networking devices, the HPOE-2400G can directly co-work with PoE IP phone to build VoIP telephony network in the office. Furthermore, the HPOE-2400G can be directly connected to any third party IEEE 802.3af / 802.3at compliant devices installed 100 meters away.

    Ordering Information
    HPOE-2400G 24-Port Gigabit IEEE 802.3at Power over Ethernet Injector Hub (720W)


  • Hardware
    Hardware Version 2
    Interface “Data” Input Ports: 24 x RJ-45
    “Data+Power” Output Ports: 24 x RJ-45
    Management Port: 1 x RJ-45; 10/100Base-TX, auto-negotiation, auto-MDI / MDIX
    Data Rate 10/100/1000Mbps
    LED System: SYS power x 1 (green)
    Management port x2: 10/100
    (green/orange)
    Per PoE port: PoE in use x 1 (green)
    PoE1 Fail x 1
    PoE2 Fail x 1
    Fan1 Fail x 1
    Fan2 Fail x 1
    Network Cable 10Base-T: 4-pair UTP Cat. 5 up to 100m (328ft)
    100Base-TX: 4-pair UTP Cat. 5 up to 100m (328ft)
    1000Base-T: 4-pair UTP Cat. 5e, 6, up to 100m (328ft)
    EIA/TIA- 568 100-ohm STP (100m)
    Dimensions (W x D x H) 440 x 300 x 44 mm (1U height)
    Weight 4.76kg
    Power Requirements 100-240V AC, 50/60 Hz
    Power Consumption 800 watts (max.)
    Cooling Fan x 3
    Power over Ethernet
    PoE Power Supply Type Mid-Span
    PoE Power Output Per port DC 52V 30.8/15.4 watts
    Power Pin Assignment 4/5(-), 7/8(+)
    PoE Power Budget 720 watts
    Number of 802.3af PD Class 0, 1, 2, 3 can be powered 24
    Number of 802.3at PD Class 1, 2, 3 can be powered 24
    Number of 802.3at PD Class 0, 4 can be powered 24
    Management
    Management Interface Web, PLANET Smart Discovery Lite
    PoE Management Power limit by consumption, classification and total limit
    PoE admin mode
    Per port power schedule
    Schedule power recycle
    Per port power enable/disable
    Power feeding priority
    Over temperature protection
    Temperature threshold
    PoE power budget usage threshold
    Current per port usage and status
    Total power consumption
    Management Feature System/management functions setup
    Web firmware upgrade
    SNMP Trap for alarm notification of events
    Standards Conformance
    Standards Compliance IEEE 802.3 10Base-T Ethernet
    IEEE 802.3u 100Base-TX Fast Ethernet
    IEEE 802.3ab 1000Base-T Gigabit Ethernet
    IEEE 802.3at High Power over Ethernet
    IEEE 802.3af Power over Ethernet
    RFC 768: UDP
    RFC 791: IP
    RFC 2068 HTTP
    RFC 1157: SNMPv1
    RFC 1902: SNMPv2c
    RFC 5424: Syslog
    Regulation Compliance FCC Part 15 Class A, CE
    Environment
    Operating Temperature 0 ~ 50 degrees C
    Storage Temperature -10 ~ 70 degrees C
    Humidity 5 ~ 95% (non-condensing)
    Ordering Information
    HPOE-2400G 24-Port Gigabit IEEE 802.3at Power over Ethernet Injector Hub (720W)

Facebooktwittergoogle_pluspinterestlinkedinyoutube

POE-171

box_POE-171
POE-171
Single-Port 10/100/1000Mbps Ultra PoE Injector (60 Watts)
0icon_60W_PoE 8icon_802.3at_802.3af_End-span_Mid-span 7icon_10M_100M_1000M 6icon_kg 4icon_plug_play 3Wall_mountable

  • Quick and Easy Gigabit High Power PoE Network Deployment
    The POE-171 is a single port ultra Power over Ethernet Injector with maximum up to 60 watts of power output over Ethernet cable. It is designed specifically to fill the demand of growing higher power required network equipment. If the POE-171 co-works with PLANET POE-171S (60-watt IEEE 802.3at PoE splitter), it can offer more PoE applications, such as:

    PoE PTZ Speed Dome
    ■ Other Network devices that need higher PoE power to work normally
    Thin-client
    AIO(All-in-One) touch PC
    ■ Remote digital signage display

    The POE-171 delivers the Ethernet digital data with DC 56V power over the twisted pair cables as an IEEE 802.3at Gigabit High Power over Ethernet Injector, and it supports distance from POE-171 to a PoE device up to 100 meters.

    60 watts of Power over 4-Pair UTP
    The POE-171 ultra PoE solution uses cabling standard as IEEE 802.3at/af PoE. Instead of delivering power over 2-pair twisted UTP – be it End-span (Pin 1,2,3 and 6) or Mid-span (Pin 4,5,7 and 8), it provides the capability to source up to 60 watts of power by using all the four pairs of standard Cat5e/6 Ethernet cabling. In the new 4-pair system, two PSE controllers will be used to power both the data pairs and the spare pairs.

     

    Cost-effective and Easy Cabling Installation
    With concepts of “Easy to install”, “Plug and Play” and “Simple troubleshooting” for business and home users, the POE-171 is in the compact size housing, and it provides one 52~56V DC input power jacket at its right side, one power LED and two PoE In-use LEDs (802.3at End-span and 802.3at Mid-span) at top side. Two RJ-45 ports — Ethernet port and Ethernet+DC port — are at side panel. Simply plug in the Ethernet cables and DC power cord, and the POE-171 is ready to provide high speed network communication and 60-watt ultra power PoE injector functions simultaneously with no need of software configuration.

     

    The POE-171 Ultra PoE Injector is an ideal solution that enables network device with high power demand to be powered directly via the RJ-45 Port interface without the need to install power outlets and electrical cabling.

    Ordering Information
    POE-171 Single-Port 10/100/1000Mbps Ultra PoE Injector (60 Watts)


  • UltraPoE / 802.3at PoE Injector Installation
    Because of having the capability of IEEE 802.3at Power over Ethernet, the POE-171 can directly connect with any IEEE 802.3at or IEEE 802.3af PoE devices, like PTZ (Pan, Tilt & Zoom) network cameras, PTZ Speed Dome, color touch-screen Voice over IP (VoIP) telephones, multi-channel wireless LAN access points and other network devices which support IEEE 802.3at or IEEE 802.3af Power over Ethernet.
     

    Ultra PoE Injector and Splitter Installation
    For a place which is hard to find the power inlet, the POE-171 and POE-171S operate as a pair to provide the easiest way to power your Ethernet devices which need high power input, such as PTZ (Pan, Tilt & Zoom) network cameras, PTZ Speed Dome, color touch-screen Voice over IP (VoIP) telephones, and multi- channel wireless LAN access points installed on the top of the building or used in enterprise office or home.

     

    IEEE 802.3at Injector and PoE Extended Installation
    To achieve the benefits of IP Surveillance and also the long-distance IP Camera distribution, the POE-171 and PLANET PoE Extender, POE-E201, can be a quick and cost-effective option. In the simplest application, the PoE Extender enables a PoE IP camera to be installed up to 200 meters away from the POE-171. The POE-171 delivers PoE power over the first 100 meters to the PoE Extender over UTP cable, and then the PoE Extender forwards the Ethernet data and the remaining POE power to the remote PoE IP camera.

    Ordering Information
    POE-171 Single-Port 10/100/1000Mbps Ultra PoE Injector (60 Watts)


  • Hardware Specifications
    Interface Input Port
    ■ 1 x RJ-45 STP
    ■ Data In
    Output Port
    ■ 1 x RJ-45 STP
    ■ PoE (Data + Power) Out
    DC socket
    ■ 56V DC Input
    LED Indicator System: Power x 1 (Green)
    PoE Port: PoE in Use x 1 (Green)
    Network Cable Ultra PoE (60W):
    10/100/1000Base-T: 4-Pair UTP Cat. 5e, 6 up to 100m (328ft)
    802.3af / at PoE(15W / 30W):
    10/100/1000Base-T: 2-Pair UTP Cat. 3, 5, 5e, 6 up to 100m (328ft)
    Data Rate 10/100/1000Mbps
    Dimensions (W x D x H) 95 x 70 x 26 mm
    Weight 237g
    Unit Input Voltage DC 56V
    Power Requirements External AC-to-DC adapter
    100-240V AC, 50/60Hz, 1.5A
    Power Consumption 60 watts max.
    Operating Temperature 0 ~ 50 degrees C
    Storage Temperature -10 ~ 70 degrees C
    Operating Humidity 5 ~ 90%, Relative Humidity, non-condensing
    Storage Humidity 5 ~ 90%, Relative Humidity, non-condensing
    Power over Ethernet
    PoE Standard IEEE 802.3at High Power over Ethernet End-span / Mid-span PSE
    Power Output DC 56V / 60-watt PoE via 4-pairs
    DC 56V / 30-watt PoE via 2-pairs
    PoE Power Supply Type End-Span + Mid-Span
    Power Pin Assignment Pair 1: 1/2(-), 3/6(+)
    Pair 2: 4/5(+), 7/8(-)
    Standards Conformance
    Standards Compliance IEEE 802.3 10Base-T Ethernet
    IEEE 802.3u 100Base-TX Fast Ethernet
    IEEE 802.3ab 1000Base-T Gigabit Ethernet
    IEEE 802.3at High Power over Ethernet
    IEEE 802.3af Power over Ethernet
    Regulation Compliance FCC Part 15 Class A, CE
    Ordering Information
    POE-171 Single-Port 10/100/1000Mbps Ultra PoE Injector (60 Watts)

Facebooktwittergoogle_pluspinterestlinkedinyoutube

IPOE-E174

box_IPOE-E174
IPOE-E174
1-Port Ultra PoE to 4-Port 802.3af/at Gigabit PoE Extender
8icon_-40-degree--75-degree 0icon_60W_PoE 8icon_802.3at_802.3af_End-span 4icon_DIN_Rail 2icon_IP-Code_30

  • PoE Solution for Long-reach Distance
    PLANET IPOE-E174 is an industrial 1-Port Ultra PoE to 4-Port 802.3af/at Gigabit PoE Extender designed especially for point to multipoint PoE application. The IPOE-E174 can obtain a maximum of 60-watt PoE power from ultra PoE input port and supplies a maximum of 50-watt PoE power budget for 4 PoE output ports, extending both the reach of Gigabit Ethernet Data and IEEE 802.3at / 802.3af Power over Ethernet over the standard 100m (328 ft.) CAT. 5/5e/6 UTP cable to 200m up to 4 powered devices at the same time. The IPOE-E174 provides a simple solution for adding PoE ports without running more cabling and achieves more flexible network applications without requiring an external power adapter.
    Environmentally Hardened Design
    With industrial-level IP30 metal case, the IPOE-E174 provides a high level of immunity against electromagnetic interference and heavy electrical surges which are usually found on plant floors or in curb-side traffic control cabinets. Being able to operate under the temperature range from -40 to 75 degrees C, the IPOE-E174 can be placed in almost any difficult environment.
    Intelligent LED Indicator for Real-time PoE Usage
    The IPOE-E174 helps users to monitor the current status of PoE power usage easily by its advanced LED indication. Called “PoE Power Usage” shown in percentage, the front panel of the IPOE-E174 has three LEDs indicating 25, 50 and 75 percent of PoE power usage. With these LED indications, you can monitor the PoE power status of the IPOE-E174 efficiently.
    Plug and Play, Easy Cabling Installation
    The IPOE-E174 is quite easy to be installed by simple plug and play. It is used between a Power Source Equipment (PSE) and the Powered Device (PD). The IPOE-E174 injects power to the PD without affecting the data transmission performance. The IPOE-E174 offers a cost-effective and quick solution to doubling the standard range of PoE from 100 to 200 meters. The IPOE-E174 is designed in a compact mini box containing 5 RJ45 ports, of which the 1 “PoE IN” port functions as PoE (Data and Power) input and the 4 “PoE OUT” ports on the other side functions as PoE (Data and Power) output. The “PoE OUT” port is also the power injector to transmit DC voltage over the Cat. 5/5e/6 cable and transfer data and power simultaneously between the PSE and PD.
    Ordering Information
    IPOE-E174 1-Port Ultra PoE to 4-Port 802.3af/at Gigabit PoE Extender


  • One Power Sourcing for Multi Powered Devices Solution
    Is 100-meter cable long enough for a wide range of IP surveillance deployments? The answer is certainly not. To achieve the benefits of IP surveillance and also the long-distance IP camera distribution, PLANET IPOE-E174 is a useful accessory if the user has most of their network already set up and they wish to expand network communications and overcome cable distance limitations offering connections to devices in locations where traditional networking does not allow.The IPOE-E174 industrial 1-Port Ultra PoE to 4-Port 802.3af/at Gigabit PoE Extender requires very little installation time and does not require any additional setup or programming, by using standard RJ45 cable from power sourcing device, such as ultra PoE injector supplying ultra PoE power to the IPOE-E174 and converting power for 4 powered devices that are IEEE 802.3af/at PoE standard compliant, meaning any additional power adapter for IP cameras and wireless access points is not necessary.
    Ordering Information
    IPOE-E174 1-Port Ultra PoE to 4-Port 802.3af/at Gigabit PoE Extender


  • Hardware Specifications
    Network Connector PoE In Port
    1 x 10/100/1000BASE-T Ethernet with ultra PoE “Data + DC” in, auto
    MDI/MDI-X, auto-negotiation RJ45 connector
    PoE Out Port
    4 x 10/100/1000BASE-T Ethernet with IEEE 802.3af/at PoE “Data + DC”
    out, auto MDI/MDI-X, auto-negotiation RJ45 connector
    Switch Architecture Store-and-Forward switch architecture
    MAC Address Table 8K MAC address table with auto learning function
    Data Buffer 1Mbit
    Switch Fabric 10Gbps
    Switch Throughput 7.44Mpps @ 64Bytes
    Flow Control IEEE 802.3x pause frame for full duplex
    Back pressure for half duplex
    Jumbo Frame 9Kbytes
    ESD Protection 6KV DC
    EFT Protection 6KV DC
    Enclosure IP30 metal case
    Installation DIN rail kit and wall-mount ear
    LED Display System: PWR (Green)
    Power Input: Midspan in (Green)
    Power Input: Endspan in (Green)
    PoE Power Usage (%): 25 (Green)
    PoE Power Usage (%): 50 (Green)
    PoE Power Usage (%): 75 (Green)
    PoE Input Port: LNK/ACT (Green)
    PoE Input Port: PoE in (Orange)
    Per PoE Output Port: LNK/ACT (Green)
    Per PoE Output Port: PoE-in-Use (Orange)
    Cable Twisted-pair cable :
    ■ 10BASE-T: 2-pair UTP Cat. 3, 4, 5 up to 100 meters
    ■ 100BASE-TX: 2-pair UTP Cat. 5, 5e up to 100 meters
    ■ 1000BASE-T: 4-pair UTP Cat. 5e, 6 up to 100 meters
    Dimensions (W x D x H) 56 x 87.8 x 135 mm
    Weignt 715g
    Power Consumption 60 watts / 204.6BTU (Full loading with PoE function)
    Power over Ethernet
    PoE Standard PoE In Port
    IEEE 802.3at High Power over Ethernet end-span / mid-span class 4 PD
    Per PoE Out Port
    IEEE 802.3at High Power over Ethernet end-span PSE
    IEEE 802.3af Power over Ethernet end-span PSE
    PoE Power PoE In Port
    50~57V DC, max. 60 watts
    Per PoE Out Port
    44~55V DC, max. 30.8 watts
    Power Pin Assignment PoE In Port
    1/2(+), 3/6(-); 4/5(+), 7/8(-)
    Per PoE Out Port
    1/2(+), 3/6(-)
    PoE Power Budget 50 watts (max.) @ Ultra PoE input
    20 watts (max.) @ IEEE 802.3at PoE+ input
    No support @ IEEE 802.3af PoE input
    Standards Conformance
    Regulation Compliance FCC Part 15 Class A, CE
    Stability Testing IEC 60068-2-32 (Free fall)
    IEC 60068-2-27 (Shock)
    IEC 60068-2-6 (Vibration)
    Standards Compliance IEEE 802.3 Ethernet
    IEEE 802.3u Fast Ethernet
    IEEE 802.3ab Gigabit Ethernet
    IEEE 802.3x Flow Control
    IEEE 802.3af Power over Ethernet
    IEEE 802.3at High Power over Ethernet
    Environment
    Operating Temperature: -40 ~ 75 degrees C
    Relative Humidity: 5 ~ 95% (non-condensing)
    Storage Temperature: -40 ~ 85 degrees C
    Relative Humidity: 5 ~ 95% (non-condensing)
    Ordering Information
    IPOE-E174 1-Port Ultra PoE to 4-Port 802.3af/at Gigabit PoE Extender

Facebooktwittergoogle_pluspinterestlinkedinyoutube

FGSD-1008HPS

box_FGSD-1008HPS
FGSD-1008HPS
8-Port 10/100TX 802.3at PoE + 2-Port Gigabit TP/ SFP combo Web Smart Switch
8icon_802.3at_802.3af_End-span 0icon_qos 2icon_1GMP_Snooping 2icon_802.1Q_VLAN 0icon_rstp 0icon_snmp

  • Ideal Cost-effective Solution for Secure IP Surveillance Infrastructure
    Particularly designed for the growing popular IP surveillance applications, PLANET FGSD-1008HPS 802.3at PoE Web Smart Switch is positioned as a surveillance switch with the central management of remote power control and IP camera monitoring. The FGSD-1008HPS provides cost-effective, non-blocking wire-speed performance and intelligent PoE functions along with 8 10/100BASE-TX ports featuring 30-watt 802.3at PoE+ with RJ45 copper interfaces and 2 Gigabit TP/SFP combo interfaces, supporting high-speed transmission of surveillance images and videos.
    Perfectly-integrated Solution for PoE IP Camera and NVR System
    Being different from the general IT industry PoE switch which usually contains 12 or 24 PoE ports, the FGSD-1008HPS provides eight 802.3at PoE+ ports for catering to medium to large scale of IP surveillance networks at a lower total cost. With its 5.6Gbps high-performance switch architecture and 125-watt PoE power budget, the recorded video files from the 8 PoE IP cameras can be powered by the FGSD-1008HPS and saved in the 8-channel NVR systems or surveillance software to perform comprehensive security monitoring. For instance, one FGSD-1008HPS can be combined with one 8-channel NVR and 8 PoE IP cameras as a kit for the administrators to centrally and efficiently manage the surveillance system in the local LAN and the remote site via Internet.
    Intelligent LED Indicator for Real-time PoE Usage
    The FGSD-1008HPS helps users to monitor the current status of PoE power usage easily and efficiently by its advanced LED indication. Called “PoE Power Usage”, the front panel of the FGSD-1008HPS Fast Ethernet PoE+ Switch has four orange LEDs indicating 30W, 60W, 90W and 120W of PoE power usage.
    Robust Layer 2 Features
    The FGSD-1008HPS can be programmed for advanced switch management functions such as dynamic port link aggregation (LACP), Spanning Tree Protocol (STP), IGMP Snooping v1, v2, bandwidth control and L2/L4 security control. The FGSD-1008HPS provides IEEE 802.1Q tagged VLAN, port-based VLAN and MTU VLAN. The VLAN groups allowed will be maximally up to 30. Via aggregation of supporting ports, the FGSD-1008HPS allows the operation of a high-speed trunk combining multiple ports and supports fail-over as well.
    Flexible and Extendable Uplink Solution
    The FGSD-1008HPS provides 2 extra Gigabit TP/SFP combo interfaces supporting 10/100/1000BASE-T RJ45 copper to connect with surveillance network devices such as NVR, Video Streaming Server or NAS to facilitate surveillance management. Or through these fiber SFP slots, it can also connect with the 1000BASE-SX/LX SFP (Small Form-factor Pluggable) fiber transceiver to uplink to backbone switch and monitoring center in long distance. The distance can be extended from 550m to 2km (multi-mode fiber), even going up to above 10/20/30/40/50/60/70/120 kilometers (single-mode fiber or WDM fiber). They are well suited for applications within the enterprise data centers and distributions.
    Ordering Information
    FGSD-1008HPS 8-Port 10/100TX 802.3at PoE + 2-Port Gigabit TP/SFP Combo Web Smart Ethernet Switch


  • PoE IP Surveillance with Extended Network Infrastructure for SMBs / Workgroups
    Providing 8 10/100BASE-T PoE ports, in-line power interfaces and two Gigabit TP/SFP Combo interfaces, the FGSD-1008HPS can easily build an IP surveillance system in which its power is centrally controlled for the enterprises. It can work with one 8-channel NVR to perform comprehensive security monitoring with 8 IP cameras via one Gigabit TP/SFP Combo port. The FGSD-1008HPS comes with non-blocking design, desktop size and SFP fiber-optic modules, bringing network infrastructure to higher flexibility but lower in cost.
    Rapid Spanning Tree Protocol for Efficient Network System
    The FGSD-1008HPS features strong rapid self-recovery capability to prevent interruptions and external intrusions. It incorporates Rapid Spanning Tree Protocol (802.1w RSTP) into customer’s automation network to enhance system reliability and uptime.
    Ordering Information
    FGSD-1008HPS 8-Port 10/100TX 802.3at PoE + 2-Port Gigabit TP/SFP Combo Web Smart Ethernet Switch


  • Hardware Specifications
    10/100Mbps Copper Ports 8 10/100BASE-TX RJ45 Auto-MDI/MDI-X ports
    Gigabit Copper Ports 2 10/100/1000BASE-T RJ45 Auto-MDI/MDI-X ports
    SFP/mini-GBIC Slots 2 1000BASE-X SFP interfaces, shared with Port-9 to Port-10
    Switch Architecture Store-and-Forward
    Switch Fabric 5.6Gbps / non-blocking
    Throughput 4.16Mpps@64Bytes
    Address Table 4K entries, automatic source address learning and ageing
    Shared Data Buffer 2.75Mb embedded memory for packet buffers
    Flow Control IEEE 802.3x pause frame for full-duplex
    Back pressure for half-duplex
    Maximum Transmit Unit 1536 Bytes
    Reset Button < 5 sec: System reboot
    > 5 sec: Factory default
    Dimensions (W x D x H) 330 x 155 x 43.5 mm, 1U height
    Weight 1.5kg
    LED System:
    Power (Green)
    10/100BASE-TX RJ45 Interfaces (Port1 to Port8):
    10/100Mbps LNK/ACT (Green)
    PoE In-Use (Orange)
    10/100/1000BASE-T RJ45 / SFP Interfaces (Port 9 to Port10):
    LNK/ACT (Green)
    100/1000 (Green)
    PoE Usage
    30W, 60W, 90W, 120W (Orange)
    Cable Twisted-Pair
    10BASE-T: 2-Pair UTP CAT. 3, 4, 5, up to 100 meters
    100BASE-TX: 2-Pair UTP CAT. 5, 5e up to 100 meters
    1000BASE-T: 4-Pair UTP CAT. 5e, 6 up to 100 meters
    Fiber-Optic Cable
    1000BASE-SX :
    50/125μm or 62.5/125μm multi-mode fiber optic cable, up to 550m (varying on SFP module)
    1000BASE-LX :
    9/125μm single-mode fiber optic cable, up to 10/20/30/40/50/60/70/120 kilometers (varying on SFP module)
    Power Requirements 100~240V AC, 50/60Hz, 2A
    Power Consumption Max. 150 watts / 511BTU
    ESD Protection Contact Discharge 8KV DC
    Air Discharge 8KV DC
    Power over Ethernet
    PoE Standard IEEE 802.3af / 802.3at PoE / PSE
    PoE Power Supply Type End-span
    PoE Power Output Per Port 52V DC, Max. 30.8 watts
    Power Pin Assignment 1/2(+), 3/6(-)
    PoE Power Budget 125 watts (max.)
    PoE Ability PD @ 7 watts 8 units
    PD @ 15.4 watts 8 units
    PD @ 30.8 watts 4 units
    Layer 2 Functions
    Port Management Port disable / enable
    Auto-negotiation 10/100/1000Mbps full and half duplex mode selection
    Flow Control disable / enable
    Bandwidth Control / Broadcast Storm Control
    Port Status Display each port’s speed duplex mode, link status, flow control status, auto negotiation status
    Port Mirroring TX / RX / Both
    Many-to-1 monitor
    VLAN 802.1Q tagged-based VLAN, up to 30 VLAN groups, out of 4094 VLAN IDs
    Port-based VLAN, up to 10 VLAN groups
    MTU VLAN
    QoS Allow to assign low / high priority on each port
    First-In-First-Out, All-High-before-Low, Weight-Round-Robin QoS policy
    Security Control MAC address binding
    TCP & UDP Filter
    Spanning Tree Protocol STP, IEEE 802.1D Spanning Tree Protocol
    RSTP, IEEE 802.1w Rapid Spanning Tree Protocol
    Link Aggregation 2 groups of 4-Port 10/100BASE-TX trunk supported
    1 group of 2-Port 10/100/1000BASE-T trunk supported
    DHCP Relay DHCP Relay Agent / DHCP Relay Server
    PoE Setting PoE Status / PoE Port Setting / PoE Sequential
    Configuration Back / Restore Configuration backup / restore through Web interface
    IGMP Snooping IGMP (v1 / v2) Snooping, up to 32 multicast groups
    Management Functions
    Basic Management Interfaces Web browser, SNMP v1 / v2c
    Standards Conformance
    Regulation Compliance FCC Part 15 Class A, CE
    Standards Compliance IEEE 802.3 Ethernet
    IEEE 802.3u Fast Ethernet
    IEEE 802.3ab Gigabit Ethernet
    IEEE 802.3z Gigabit Ethernet
    IEEE 802.3x Full-duplex flow control
    IEEE 802.1Q VLAN
    IEEE 802.1p QoS
    IEEE 802.1D Spanning Tree Protocol
    IEEE 802.1w Rapid Spanning Tree Protocol
    IEEE 802.3af Power over Ethernet
    IEEE 802.3at Power over Ethernet Plus
    Environment
    Operating Temperature: 0 ~ 50 degrees C
    Relative Humidity: 5 ~ 95% (non-condensing)
    Storage Temperature: -10 ~ 70 degrees C
    Relative Humidity: 5 ~ 95% (non-condensing)
    Ordering Information
    FGSD-1008HPS 8-Port 10/100TX 802.3at PoE + 2-Port Gigabit TP/SFP Combo Web Smart Ethernet Switch

Facebooktwittergoogle_pluspinterestlinkedinyoutube

XGSW-28040HP

box_XGSW-28040HP
XGSW-28040HP
L2+ 24-Port 10/100/1000Mbps 802.3at PoE + 4-Port 10G SFP+ Managed Switch with Hardware Layer3 IPv4/IPv6 Static Routing
8icon_802.3at_802.3af_End-span 6icon_10Gbps 1icon_IPv6-Management 2icon_802.1Q_VLAN 6icon_RING 2icon_L3-Static-Routing

  • Cost-effective 10Gbps Uplink Capacitated Managed PoE+ Switch for Large Surveillance Applications
    The XGSW-28040HP is the latest generation of PLANET Managed Gigabit PoE Switches featuring PLANET intelligent PoE functions to improve the availability of critical business applications. It provides IPv6/IPv4 Layer 3 static routing and built-in L2/L4 Gigabit Switching engine along with 24 10/100/1000Base-T ports featuring 30-watt 802.3at PoE+, 4 Gigabit SFP fiber slots and 4 10Gbps SFP+ fiber slots. With total power budget up to 440 watts for different kinds of PoE applications, it provides a quick, safe and cost-effective Power over Ethernet network solution to IP security surveillance for small businesses and enterprises.
    Flexible and Extendable 10Gbps Ethernet Solution
    10G Ethernet is a big leap in the evolution of Ethernet. Each of the SFP+ slot supports dual-speed, 10GBase-SR/LR or 1000Base-SX/LX, meaning the administrator now can flexibly choose the suitable SFP/SFP+ transceiver according to the transmission distance or the transmission speed required to extend the network efficiently. With its 4-port, 10G Ethernet link capability, the XGSW-28040HP provides broad bandwidth and powerful processing capacity.

     

    Centralized Power Management for Gigabit Ethernet PoE Networking
    To fulfill the needs of higher power required PoE network applications with Gigabit speed transmission, the XGSW-28040HP features high-performance Gigabit IEEE 802.3af PoE (up to 15.4 watts) and IEEE 802.3at PoE+ (up to 30 watts) on all ports. It perfectly meets the power requirements of PoE VoIP phone and all kinds of PoE IP cameras such as IR, PTZ, speed dome cameras or even box type IP cameras with built-in fan and heater for high power consumption.

    The XGSW-28040HP’s PoE capabilities also help to reduce deployment costs for network devices as a result of freeing from restrictions of power outlet locations. Power and data switching are integrated into one unit, delivered over a single cable and managed centrally. It thus eliminates cost for additional AC wiring and reduces installation time.

    Built-in Unique PoE Functions for Surveillance Management
    As a managed PoE Switch for surveillance network, the XGSW-28040HP features intelligent PoE Management functions:
    PD ALIVE Check
    Scheduled Power Recycle
    SMTP/SNMP Trap Event Alert
    PoE Schedule

    Intelligent Powered Device Alive Check
    The XGSW-28040HP can be configured to monitor connected PD (Powered Device) status in real-time via ping action. Once the PD stops working and it is without response, the XGSW-28040HP will resume the PoE port power and bring the PD back to work. It will greatly enhance the network reliability through the PoE port resetting the PD’s power source and reduce administrator management burden.

    Scheduled Power Recycle
    The XGSW-28040HP allows each of the connected PDs (Powered Devices) to reboot in a specific time each week. Therefore, it will reduce the chance of PD (Powered Device) crash resulting from buffer overflow.
    SMTP/SNMP Trap Event Alert
    Though most NVR or camera management software offers SMTP email alert function, the XGSW-28040HP further provides event alert function to help to diagnose the abnormal device owing to whether or not there is a break of the network connection, loss of PoE power or the rebooting response by PD Alive Check process.

     

    PoE Schedule for Energy Saving
    Besides being used for IP surveillance, the XGSW-28040HP is certainly applicable to construct any PoE network including VoIP and wireless LAN. Under the trend of energy saving worldwide and contributing to the environmental protection on the Earth, the XGSW-28040HP can effectively control the power supply besides its capability of giving high watts power. The “PoE schedule” function helps you to enable or disable PoE power feeding for each PoE port during specified time intervals and it is a powerful function to help SMB or Enterprise save power and money.

    Solution for IPv6 Networking
    Faced with the increasingly large number of IP cameras and wireless APs deployed in all kinds of applications, more and more network facilities start to support the IPv6 protocol for the next-generation networking. By supporting IPv6 / IPv4 dual stack and plenty of management functions with easy and friendly management interfaces, the XGSW-28040HP is the best choice for IP surveillance, VoIP and wireless service providers to connect with the IPv6 network. It also helps the SMB to step in the IPv6 era with the lowest investment but not need to replace the network facilities while the ISP constructs the IPv6 FTTx edge network.
    IPv4 and IPv6 VLAN Routing for Secure and Flexible Management
    To help customers stay on top of their businesses, the XGSW-28040HP switch not only provides ultra high transmission performance and excellent layer 2 technologies, but also offers IPv4/IPv6 VLAN routing feature which allows to cross over different VLANs and different IP addresses for the purpose of having a highly secured, flexible management and simpler networking application.

    Enhanced Security
    The XGSW-28040HP offers a comprehensive Layer 2 to Layer 4 Access Control List (ACL) for enforcing security to the edge. It can be used to restrict network access by denying packets based on source and destination IP address, TCP/UDP ports or defined typical network applications. Its protection mechanism also comprises 802.1X Port-based and MAC-based user and device authentication. With the private VLAN function, communication between edge ports can be prevented to ensure user privacy. Furthermore, the XGSW-28040HP provides DHCP Snooping, IP Source Guard and Dynamic ARP Inspection functions to prevent IP snooping from attack and discard ARP packets with invalid MAC address. The network administrators can now construct highly secured corporate networks with considerably less time and effort than before.

    Robust Layer 2 Features
    The XGSW-28040HP can be programmed for advanced switch management functions such as dynamic port link aggregation, Q-in-Q VLANM, private VLAN, Multiple Spanning Tree Protocol (MSTP), Layer 2/4 QoS, bandwidth control and IGMP/MLD Snooping. The XGSW-28040HP also provides 802.1Q Tagged VLAN, and the VLAN groups allowed will be maximally up to 256. Via aggregation of supporting ports, the XGSW-28040HP allows the operation of a high-speed trunk combining multiple ports. It enables up to 14 groups of 8 ports for trunk maximum and supports connection fail-over as well.

    Excellent Traffic Control
    The XGSW-28040HP is loaded with powerful traffic management and QoS features to enhance connection services by SMBs and enterprises. The QoS features include wire-speed Layer 4 traffic classifiers and bandwidth limitation that are particular useful for multi-tenant unit, multi business unit, Telco, or Network Service Provide applications. It also empowers the enterprises to take full advantages of the limited network resources and guarantees the best performance in VoIP and Video conferencing transmission.

    User-friendly Secure Management
    The XGSW-28040HP Managed Switch is equipped with console, Web and SNMP management interfaces. With the built-in Web-based management interface, the XGSW-28040HP offers an easy-to-use, platform-independent management and configuration facility. The XGSW-28040HP supports standard Simple Network Management Protocol (SNMP) and can be managed via any management software that supports SNMP protocol. For text-based management, the XGSW-28040HP can be accessed via Telnet and the console port. Moreover, the XGSW-28040HP offers secure remote management by supporting SSH, SSL and SNMPv3 connection which encrypt the packet content at each session.

    Flexibility and Extension Solution
    The four mini-GBIC slots built in the XGSW-28040HP series support dual speed as it features 100Base-FX and 1000Base-SX/LX SFP (Small Form-factor Pluggable) fiber-optic modules. Now the administrator can flexibly choose a suitable SFP transceiver according to not only the transmission distance, but also the transmission speed required. The distance can be extended from 550 meters to 2km (multi-mode fiber) and up to above 10/20/30/40/50/70/120 kilometers (single-mode fiber or WDM fiber). They are well suited for applications within the enterprise data centers and distributions.

    Intelligent SFP Diagnosis Mechanism
    The XGSW-28040HP supports SFP-DDM (Digital Diagnostic Monitor) function that greatly helps network administrator to easily monitor real-time parameters of the SFP, such as optical output power, optical input power, temperature, laser bias current, and transceiver supply voltage.

    Ordering Information
    XGSW-28040HP L2+ 24-Port 10/100/1000Mbps 802.3at PoE + 4-Port 10G SFP+ Managed Switch with Hardware Layer3 IPv4/IPv6 Static Routing
    XGSW-28040 L2+ 24-Port 10/100/1000Mbps + 4-Port 10G SFP+ Managed Switch with Layer3 IPv4/IPv6 Static Routing
    Accessories
    MTB-LR SFP+ Port 10GBase-LR mini-GBIC Module (Single mode / 1310nm / max. 10km)
    MTB-SR SFP+ Port 10GBase-SR mini-GBIC Module (Multi-mode / 850nm / max. 300m)


  • Redundant Ring, Fast Recovery for Metropolitan Area Network
    The XGSW-28040HP supports redundant ring technology and features strong rapid self-recovery capability to prevent interruptions and external intrusions. It incorporates advanced ITU-G.8032 Ethernet Ring Protection Switching technology and IEEE standard Multiple Spanning Tree Protocol (802.1s MSTP) into customer’s IP surveillance network to enhance system reliability and uptime in harsh factory environments. The XGSW-28040HP also protects customer’s network connectivity with switching recovery capability that is used for implementing fault tolerant ring and mesh network architectures. If the network was interrupted accidentally, the fault recovery times could be less than 50ms to quickly bring the network back to normal operation.
    Layer 2+ VLAN Static Routing and PoE Application
    The XGSW-28040HP features both IEEE 802.3af and High Power IEEE 802.3at Power over Ethernet (PoE) that combine up to 30-watt power output per port, and PoE budget is up to 440 watts which can deploy up to 24 PoE PD devices. With the built-in robust IPv4 / IPv6 Layer 3 traffic routing protocols, the XGSW-28040HP ensures reliable routing between VLANs and network segments. The routing protocols can be applied by VLAN interface with up to 128 routing entries. The XGSW-28040HP is certainly a cost-effective and ideal solution for enterprises.
    Ordering Information
    XGSW-28040HP L2+ 24-Port 10/100/1000Mbps 802.3at PoE + 4-Port 10G SFP+ Managed Switch with Hardware Layer3 IPv4/IPv6 Static Routing
    XGSW-28040 L2+ 24-Port 10/100/1000Mbps + 4-Port 10G SFP+ Managed Switch with Layer3 IPv4/IPv6 Static Routing
    Accessories
    MTB-LR SFP+ Port 10GBase-LR mini-GBIC Module (Single mode / 1310nm / max. 10km)
    MTB-SR SFP+ Port 10GBase-SR mini-GBIC Module (Multi-mode / 850nm / max. 300m)


  • Hardware Specifications
    Copper Ports 24 10/100/1000Base-T RJ45 auto-MDI/MDI-X ports
    SFP/mini-GBIC Slots 4 100/1000Base-X SFP interfaces, shared with Port-21 to Port-24
    Compatible with 100Base-FX SFP transceiver
    SFP+ Slots 4 10GBase-SR/LR SFP+ interface (Port-25 to Port-28)
    Compatible with 1000Base-SX/LX/BX SFP transceiver
    Console 1 x RS-232-to-RJ45 serial port (115200, 8, N, 1)
    Switch Architecture Store-and-Forward
    Switch Fabric 128Gbps / non-blocking
    Throughput 95Mpps@64Bytes
    Address Table 16K entries, automatic source address learning and ageing
    Share Data Buffer 32M bits
    Flow Control IEEE 802.3x pause frame for full-duplex
    Back pressure for half-duplex
    Jumbo Frame 10K bytes
    Reset Button < 5 sec: System reboot
    > 5 sec: Factory default
    Dimensions (W x D x H) 440 x 300 x 44.5 mm, 1U height
    Weight 4887g
    LED System:
    PWR (Green), SYS (Green), Ring (Green), R.O. (Green)
    PWR1 (Green), PWR2 (Green), FAN1 (Green), FAN2 (Green)
    10/100/1000T RJ45 Interfaces (Port 1 to Port 24):
    10/100/1000Mbps LNK/ACT (Green)
    PoE In-Use (Orange)
    100/1000Mbps SFP Combo Interfaces (Port 21 to Port 24):
    1000Mbps (Green), LNK/ACT (Orange)
    1/10Gbps SFP+ Interfaces (Port 25 to Port 28):
    10Gbps LNK/ACT (Green), 1Gbps LNK/ACT (Orange)
    Power Requirements 100~240V AC, 50/60Hz
    Power Consumption 502 watts / 1712.8 BTU Max.
    ESD Protection 6KV DC
    Power over Ethernet
    PoE Standard IEEE 802.3af / 802.3at PoE / PSE
    PoE Power Supply Type End-span
    PoE Power Output Per Port 56V DC, Max. 30.8 watts
    Power Pin Assignment 1/2(+), 3/6(-)
    PoE Power Budget 440 watts (max.) @ 25 degrees C
    380 watts (max.) @ 50 degrees C
    PoE Ability PD @ 7 watts 24 units
    PoE Ability PD @ 15.4 watts 24 units
    PoE Ability PD @ 30.8 watts 14 units
    Layer 2 Functions
    Port Configuration Port disable / enable
    Auto-negotiation 10/100/1000Mbps full and half duplex mode selection
    Flow control disable / enable
    Port Status Display each port’s speed duplex mode, link status, flow control status, auto-negotiation status, trunk status
    Port Mirroring TX / RX / Both
    Many-to-1 monitor
    VLAN 802.1Q Tagged based VLAN
    Q-in-Q tunneling
    Private VLAN Edge (PVE)
    MAC-based VLAN
    Protocol-based VLAN
    Voice VLAN
    IP Subnet-based VLAN
    MVR (Multicast VLAN Registration)
    Up to 255 VLAN groups, out of 4094 VLAN IDs
    Link Aggregation IEEE 802.3ad LACP / Static Trunk
    16 groups of 8-Port trunk supported
    Spanning Tree Protocol STP, IEEE 802.1D Spanning Tree Protocol
    RSTP, IEEE 802.1w Rapid Spanning Tree Protocol
    MSTP, IEEE 802.1s Multiple Spanning Tree Protocol
    QoS Traffic classification based, Strict priority and WRR
    8-Level priority for switching
    – Port Number
    – 802.1p priority
    – 802.1Q VLAN tag
    – DSCP/TOS field in IP packet
    IGMP Snooping IGMP (v1/v2/v3) Snooping, up to 255 multicast groups
    IGMP Querier mode support
    MLD Snooping MLD (v1/v2) Snooping, up to 255 multicast groups
    MLD Querier mode support
    Access Control List IP-based ACL / MAC-based ACL
    Up to 256 entries
    Bandwidth Control Per port bandwidth control
    Ingress: 100Kbps~1000Mbps
    Egress: 100Kbps~1000Mbps
    Layer 3 Functions
    IP Interfaces Max. 128 VLAN interfaces
    Routing Table Max. 32 routing entries
    Routing Protocols IPv4 hardware Static Routing
    IPv6 hardware Static Routing
    Management
    Basic Management Interfaces Console / Telnet / Web browser / SNMP v1, v2c
    Secure Management Interfaces SSH, SSL, SNMP v3
    SNMP MIBs RFC 1213 MIB-II
    RFC 1493 Bridge MIB
    RFC 1643 Ethernet MIB
    RFC 2863 Interface MIB
    RFC 2665 Ether-Like MIB
    RFC 2819 RMON MIB (Group 1, 2, 3 and 9)
    RFC 2737 Entity MIB
    RFC 2618 RADIUS Client MIB
    RFC 2863 IF-MIB
    RFC 2933 IGMP-STD-MIB
    RFC 3411 SNMP-Frameworks-MIB
    RFC 4292 IP Forward MIB
    RFC 4293 IP MIB
    RFC 4836 MAU-MIB
    IEEE 802.1X PAE
    LLDP
    Power over Ethernet MIB
    Standards Conformance
    Regulation Compliance FCC Part 15 Class A, CE
    Standards Compliance IEEE 802.3 10Base-T
    IEEE 802.3u 100Base-TX/100Base-FX
    IEEE 802.3z Gigabit SX/LX
    IEEE 802.3ab Gigabit 1000T
    IEEE 802.3ae 10Gb/s Ethernet
    IEEE 802.3x Flow Control and Back pressure
    IEEE 802.3ad Port trunk with LACP
    IEEE 802.1D Spanning tree protocol
    IEEE 802.1w Rapid spanning tree protocol
    IEEE 802.1s Multiple spanning tree protocol
    IEEE 802.1p Class of service
    IEEE 802.1Q VLAN Tagging
    IEEE 802.1X Port Authentication Network Control
    IEEE 802.3af Power over Ethernet
    IEEE 802.3at Power over Ethernet PLUS
    IEEE 802.1ab LLDP
    RFC 768 UDP
    RFC 793 TFTP
    RFC 791 IP
    RFC 792 ICMP
    RFC 2068 HTTP
    RFC 1112 IGMP version 1
    RFC 2236 IGMP version 2
    RFC 3376 IGMP version 3
    RFC 2710 MLD version 1
    FRC 3810 MLD version 2
    Environment
    Operating Temperature: 0 ~ 50 degrees C
    Relative Humidity: 5 ~ 95% (non-condensing)
    Storage Temperature: -10 ~ 70 degrees C
    Relative Humidity: 5 ~ 95% (non-condensing)
    Ordering Information
    XGSW-28040HP L2+ 24-Port 10/100/1000Mbps 802.3at PoE + 4-Port 10G SFP+ Managed Switch with Hardware Layer3 IPv4/IPv6 Static Routing
    XGSW-28040 L2+ 24-Port 10/100/1000Mbps + 4-Port 10G SFP+ Managed Switch with Layer3 IPv4/IPv6 Static Routing
    Accessories
    MTB-LR SFP+ Port 10GBase-LR mini-GBIC Module (Single mode / 1310nm / max. 10km)
    MTB-SR SFP+ Port 10GBase-SR mini-GBIC Module (Multi-mode / 850nm / max. 300m)

Facebooktwittergoogle_pluspinterestlinkedinyoutube

IGS-10020HPT

box_IGS-10020HPT
IGS-10020HPT
L2+ Industrial 8-Port 10/100/1000T 802.3at PoE + 2-Port 100/1000X SFP Managed Switch with Wide Operating Temperature
1icon_IPv6-Management 0icon_mstp 4icon_SSL-SSH 1icon_30W_Per-Port 8icon_802.3at_802.3af_End-span 8icon_-40-degree--75-degree

  • Environmentally Hardened Design
    PLANET Industrial 8-Port Gigabit 802.3at PoE Switch, IGS-10020HPT, is equipped with rugged IP30 metal case for stable operation in heavy Industrial demanding environments. With IP30 industrial case protection, the IGS-10020HPT provides a high level of immunity against electromagnetic interference and heavy electrical surges which are usually found on plant floors or in curbside traffic control cabinets. Being able to operate under wide temperature range from -40 to 75 degrees C, the IGS-10020HPT can be placed in almost any difficult environment. The IGS-10020HPT also allows either DIN rail or wall mounting for efficient use of cabinet space.
    Redundant Ring, Fast Recovery for Surveillance System
    The IGS-10020HPT supports redundant ring technology and features strong rapid self-recovery capability to prevent interruptions and external intrusions. It incorporates advanced Redundant Ringtechnology, Spanning Tree Protocol (802.1w RSTP), and redundant power supply system into customer’s industrial automation network to enhance system reliability and uptime in harsh factory environments. The IGS-10020HPT also protects customer’s industrial network connectivity with switching recovery capability that is used for implementing fault tolerant ring and mesh network architectures. If the Industrial network was interrupted accidentally, the fault recovery times could be less than 50ms to quickly bring the network back to normal operation.
    High Power PoE for Security and Public Service Applications
    To fulfill the demand of High Power PoE for network applications with Gigabit speed transmission under wide temperature, the IGS-10020HPT provides 8 10/100/1000Mbps ports featuring both IEEE 802.3af and High Power IEEE 802.3at Power over Ethernet (PoE) that combines up to 270-watt power output and data per port over one Cat.5E / 6 Ethernet cable. With a total 270-watt PoE budget on the whole system, the IGS-10020HPT is designed specifically to satisfy the growing demand of higher power consuming network PDs (powered devices) such as PTZ (Pan, Tilt & Zoom) / Speed Dome network cameras, multi-channel (802.11a / b / g / n) wireless LAN access points and other PoE network devices by providing PoE power double that the current conventional 802.3af PoE.
    Intelligent Alive Check for Powered Device
    The IGS-10020HPT PoE Switch can be configured to monitor connected PD’s status in real-time via ping action. Once the PD stops working and responding, the IGS-10020HPT will recycle the PoE port power and bring the PD back to work. It also greatly enhances the reliability owing that the PoE port will reset the PD power, thus reducing administrator’s management burden.
    PoE Schedule for Energy Saving
    Under the trend of energy saving worldwide and contributing to environment protection on the earth, the IGS-10020HPT can effectively control the power supply besides its capability of giving high watts power. The built-in “PoE schedule” function helps you to enable or disable PoE power feeding for each PoE port during specified time intervals and it is a powerful function to help SMB or Enterprise save power and money.
    Digital Input and Digital Output for external Alarm
    The IGS-10020HPT supports Digital Input, and Digital Output on its front panel. This external alarm enables users to use Digital Input to detect, log external device status (such as door intrusion detector ), and send event alarm to the administrators. The Digital Output could be used to alarm the administrators if the IGS-10020HPT port link down, link up or power failure.
    Robust Layer 2 Features
    The IGS-10020HPT can be programmed for advanced switch management functions such as dynamic Port link aggregation, Q-in-Q VLAN, private VLAN, Rapid Spanning Tree protocol, Layer 2 to Layer 4 QoS, bandwidth control and IGMP Snooping. The IGS-10020HPT provides 802.1Q Tagged VLAN, and the VLAN groups allowed will be maximally up to 255. Via aggregation of supporting ports, the IGS-10020HPT allows the operation of a high-speed trunk combining multiple ports. It enables maximum up to 5 groups of 8 ports for trunking, and supports fail-over as well.

     

    Efficient Management
    For efficient management, the IGS-10020HPT Managed Ethernet Switch is equipped with console, WEB and SNMP management interfaces. With the built-in Web-based management interface, the IGS-10020HPT offers an easy-to-use, platform-independent management and configuration facility. For text-based management, the IGS-10020HPT can be accessed via Telnet and the console port. Moreover, it also offers secure remote management via any standard-based management software by supporting SNMPv3 connection which encrypts the packet content at each session.

     

    Powerful Security
    The IGS-10020HPT offers comprehensive Layer 2 to Layer 4 Access Control List (ACL) for enforcing security to the edge. It can be used to restrict network access by denying packets based on source and destination IP address, TCP/UDP ports or defined typical network applications. Its protection mechanism also comprises of 802.1x Port-Based and MAC-Based user and device authentication. With the private VLAN function, communication between edge ports can be prevented to ensure user privacy. The network administrators can now construct highly secured corporate networks with considerably less time and effort than before.

     

    Flexibility and Extension Solution
    The two mini-GBIC slots built in the IGS-10020HPT support Dual-Speed, 100Base-FX and 1000Base-SX/LX SFP (Small Form-factor Pluggable) fiber-optic modules, that means, the administrator now can flexibly choose the suitable SFP transceiver according to not only the transmission distance but also the transmission speed required. The distance can be extended from 550 meters (Multi-Mode fiber) up to above 10/50/70/120 kilometers (Single-Mode fiber or WDM fiber). They are well suited for applications within the enterprise data centers and distributions.

     

    Perfect Integration Solution for Outdoor IP PoE Camera and NVR System
    The IGS-10020HPT provides 8 10/100/1000Mbps 802.3at PoE ports and can offer sufficient PoE power for 8 PoE IP cameras at the same time. In addition, with the 2-Port 100/1000Base-X SFP interfaces, the IGS-10020HPT can connect to core fiber switch and send video stream to NVR and monitor center. Through the high performance switch architecture, the IGS-10020HPT facilitates the recorded video files from the 8 PoE IP Cameras to be saved in the NVR systems. Furthermore, the NVR systems can be controlled and monitored both in the local LAN and the remote site via Internet. The IGS-10020HPT undoubtedly brings an ideal secure surveillance system with lower total cost.

    Ordering Information
    IGS-10020HPT Industrial 8-Port 10/100/1000T 802.3at PoE + 2-Port 100/1000X SFP Managed Switch with Wide Operating Temperature


  • Industrial Area Department / Workgroup PoE Switch
    Providing up to 8 PoE+, in-line power interface, the IGS-10020HPT can easily build a power central-controlled IP phone system, IP camera system, or wireless AP group for Industrial network. For instance, 8 PoE IP cameras or Wireless Access Points can be easily installed around the corner in the industrial environment for surveillance demands or for a wireless roaming network. Without the power-socket limitation, the IGS-10020HPT makes the installation of IP cameras or Wireless AP more easily and efficiently.
    High Power IP Surveillance and Wireless LAN Service in Public Transportation
    Having the capability of IEEE 802.3at Power over Ethernet standard, the IGS-10020HPT can directly connect with any IEEE 802.3at end-nodes like PTZ (Pan, Tilt & Zoom) network cameras, PTZ Speed Dome cameras, color touch- screen Voice over IP (VoIP) telephones, and multi-channel wireless LAN access points. Besides the wired Internet network, the wireless LAN would be more efficient for the transportation station to provide high speed and wide area Internet services for travelers. By adopting PoE Wireless LAN structure, the transportation authority gains benefits from less cost while providing better Internet services in wider areas for the travelers.
    Ordering Information
    IGS-10020HPT Industrial 8-Port 10/100/1000T 802.3at PoE + 2-Port 100/1000X SFP Managed Switch with Wide Operating Temperature


  • Hardware Specification
    Copper Ports 8 10/ 100/1000Base-T RJ-45 Auto-MDI/MDI-X ports
    SFP/mini-GBIC Slots 2 1000Base-SX/LX/BX SFP interfaces (Port-9 and Port-10)
    Compatible with 100Base-FX SFP
    Console 1 x RJ-45-to-RS-232 serial port (115200, 8, N, 1)
    Switch Architecture Store-and-Forward
    Switch Fabric 20Gbps / non-blocking
    Throughput (packet per second) 14.8Mpps@ 64Bytes packet
    Address Table 8K entries, automatic source address learning and ageing
    Share Data Buffer 4Mbits
    Flow Control IEEE 802.3x Pause Frame for Full-Duplex
    Back pressure for Half-Duplex
    Jumbo Frame 9Kbytes
    Reset Button < 5 sec: System reboot
    > 5 sec: Factory Default
    ESD Protection 6KV DC
    EFT Protection 6KV DC
    Enclosure IP30 Aluminum Metal Case
    Installation DIN Rail Kit and Wall Mount Kit
    Connector Removable 6-pin terminal block for power input
    Pin 1/2 for Power 1; Pin 3/4 for fault alarm; Pin 5/6 for Power 2
    Removable 6-pin terminal block for DI/DO interface
    Pin 1/2 for DI 1 & 2; Pin 3/4 for DO 1 & 2; Pin 5/6 for GND
    Alarm One relay output for power fail. Alarm Relay current carry ability: 1A @ DC 24V
    DI/DO 2 Digital Input (DI):
    ■ Level 0:-24V~2.1V (±0.1V)
    ■ Level 1: 2.1V~24V (±0.1V)
    ■ Input Load to 24V DC, 10mA max.
    2 Digital Output (DO): Open collector to 24VDC, 100mA max.
    LED Indicator System:
    ■ Power 1 (Green)
    ■ Power 2 (Green)
    ■ Fault Alarm (Green)
    ■ Ring (Green)
    ■ Ring Owner (Green)
    Per 10/100/1000T RJ-45 Ports:
    ■ PoE In-Use (Orange)
    ■ LNK/ACT (Green)
    Per SFP Interface:
    ■ 1000 (Orange)
    ■ LNK/ACT (Green)
    Dimension (W x D x H) 152 x 107x 72 mm
    Weight 1684g
    Power Requirement DC 48V
    Power Consumption 31.9 Watts / 108.78BTU (Full loading without PoE function)
    306 Watts / 1043.46BTU (Full loading with PoE function)
    Power Over Ethernet
    PoE Standard IEEE 802.3af / IEEE 802.3at Power over Ethernet / PSE
    PoE Power Supply Type End-Span
    PoE Power Output Per Port 56V DC, 350mA . Max. 15.4 watts (IEEE 802.3af)
    Per Port 56V DC, 590mA. Max. 30 watts (IEEE 802.3at)
    Power Pin Assignment 1/2(+), 3/6(-)
    PoE Power Budget 270W maximum (depends on power input)
    Max. number of Class 2 PD 8
    Max. number of Class 3 PD 8
    Max. number of Class 4 PD 8
    Layer 2 Function
    Basic Management Interfaces Console, Telnet, Web Browser, SNMP v1, v2c
    Secure Management Interfaces SSH, SSL, SNMP v3
    Port Configuration Port disable/enable
    Auto-Negotiation 10/100/1000Mbps full and half duplex mode selection
    Flow Control disable / enable
    Power saving mode control
    Port Status Display each port’s speed duplex mode, link status, Flow control status,
    Auto negotiation status, trunk status
    Port Mirroring TX / RX / Both
    1 to 1 monitor
    VLAN 802.1Q Tagged Based VLAN, up to 255 VLAN groups
    Q-in-Q tunneling
    Private VLAN Edge (PVE)
    MAC-Based VLAN
    Protocol-Based VLAN
    Voice VLAN
    MVR (Multicast VLAN Registration)
    Up to 255 VLAN groups, out of 4094 VLAN IDs
    Link Aggregation IEEE 802.3ad LACP / Static Trunk
    Supports 5 groups of 8-Port trunk support
    QoS Traffic classification based, Strict priority and WRR
    8-Level priority for switching
    ■ Port Number
    ■ 802.1p priority
    ■ 802.1Q VLAN tag
    ■ DSCP/TOS field in IP Packet
    IGMP Snooping IGMP (v1/v2/V3) Snooping, up to 255 multicast Groups
    IGMP Querier mode support
    MLD Snooping MLD (v1/v2) Snooping, up to 255 multicast Groups
    MLD Querier mode support
    Access Control List IP-Based ACL / MAC-Based ACL
    Up to 123 entries
    Bandwidth Control Per port bandwidth control
    Ingress: 500Kb~1000Mbps
    Egress: 500Kb~1000Mbps
    SNMP MIBs RFC-1213 MIB-II
    IF-MIB
    RFC-1493 Bridge MIB
    RFC-1643 Ethernet MIB
    RFC-2863 Interface MIB
    RFC-2665 Ether-Like MIB
    RFC-2819 RMON MIB (Group 1, 2, 3 and 9)
    RFC-2737 Entity MIB
    RFC-2618 RADIUS Client MIB
    RFC-2933 IGMP-STD-MIB
    RFC3411 SNMP-Frameworks-MIB
    IEEE 802.1X PAE
    LLDP
    MAU-MIB
    Standards Conformance
    Regulation Compliance FCC Part 15 Class A, CE
    Stability Testing IEC60068-2-32 (Free fall)
    IEC60068-2-27 (Shock)
    IEC60068-2-6 (Vibration)
    Standards Compliance IEEE 802.3 10Base-T
    IEEE 802.3u 100Base-TX/100Base-FX
    IEEE 802.3z Gigabit SX/LX
    IEEE 802.3ab Gigabit 1000T
    IEEE 802.3x Flow Control and Back pressure
    IEEE 802.3ad Port trunk with LACP
    IEEE 802.1D Spanning tree protocol
    IEEE 802.1w Rapid spanning tree protocol
    IEEE 802.1s Multiple spanning tree protocol
    IEEE 802.1p Class of service
    IEEE 802.1Q VLAN Tagging
    IEEE 802.1x Port Authentication Network Control
    IEEE 802.1ab LLDP
    IEEE 802.3af Power over Ethernet
    IEEE 802.3at Power over Ethernet
    RFC 768 UDP
    RFC 793 TFTP
    RFC 791 IP
    RFC 792 ICMP
    RFC 2068 HTTP
    RFC 1112 IGMP version 1
    RFC 2236 IGMP version 2
    Standards Compliance IEEE 802.3 10Base-T
    IEEE 802.3u 100Base-TX/100Base-FX
    IEEE 802.3z Gigabit SX/LX
    IEEE 802.3ab Gigabit 1000T
    IEEE 802.3x Flow Control and Back pressure
    IEEE 802.3ad Port trunk with LACP
    IEEE 802.1D Spanning tree protocol
    IEEE 802.1w Rapid spanning tree protocol
    IEEE 802.1s Multiple spanning tree protocol
    IEEE 802.1p Class of service
    IEEE 802.1Q VLAN Tagging
    IEEE 802.1x Port Authentication Network Control
    IEEE 802.1ab LLDP
    IEEE 802.3af Power over Ethernet
    IEEE 802.3at Power over Ethernet
    RFC 768 UDP
    RFC 793 TFTP
    RFC 791 IP
    RFC 792 ICMP
    RFC 2068 HTTP
    RFC 1112 IGMP version 1
    RFC 2236 IGMP version 2
    Environment
    Operating Temperature -40 ~ 75 degrees C
    Storage Temperature -40 ~ 85 degrees C
    Humidity 5 ~ 95% (Non-condensing)
    Ordering Information
    IGS-10020HPT Industrial 8-Port 10/100/1000T 802.3at PoE + 2-Port 100/1000X SFP Managed Switch with Wide Operating Temperature

Facebooktwittergoogle_pluspinterestlinkedinyoutube