Planet

SGS-6340-24T4S

box_SGS-6340-24T4S
SGS-6340-24T4S undefined
Layer 3 24-Port 10/100/1000T + 4-Port 1000X SFP Stackable Managed Switch
3icon_L3_RIP_Routing 2icon_L3-Static-Routing 4icon_L3_OSPF_Routing 1icon_IPv6-Management

  • Powerful Layer 3 Gigabit Routing Solution for Enterprise Backbone and Data Center Networking
    PLANET SGS-6340-24T4S is a Layer 3 Stackable Managed Gigabit Switch that provides high-density performance,Layer 3 static routing, RIP (Routing Information Protocol) and OSPF (Open Shortest Path First). With56Gbps switching fabric, the SGS-6340-24T4S can handle extremely large amounts of data in a secure topology linking to an enterprise backbone or high capacity servers. The powerful WRR (Weighted Round Robin) and Network Security features make the SGS-6340-24T4S perform effective data traffic control for ISP and enterprise VoIP, video streaming, and multicast applications.
    Layer 3 Routing Support
    The SGS-6340-24T4S enables the administrator to conveniently boost network efficiency by configuring Layer 3 static routing manually, the RIP (Routing Information Protocol) or OSPF (Open Shortest Path First) settings automatically. The RIP can employ the hop count as a routing metric and prevent routing loops by implementing a limit on the number of hops allowed in a path from the source to a destination. The maximum number of hops allowed for the RIP is 15. The OSPF is an interior dynamic routing protocol for autonomous system based on link-state. The protocol creates a link-state database by exchanging link-states among Layer3 switches, and then uses the Shortest Path First algorithm to generate a route table based on that database.

    Abundant IPv6 Support
    The SGS-6340-24T4S provides IPv6 management and enterprise-level secure features such as SSH, ACL, WRRand RADIUS authentication. The SGS-6340-24T4S thus helps the enterprises to step in the IPv6 era with the lowest investment. In addition, you don’t need to replace the network facilities when the IPv6 FTTx edge network is built.

    High Performance
    The SGS-6340-24T4S boasts a high-performance switch architecture that is capable of providing non-blocking switch fabric and wire-speed throughput as high as 56Gbps, which greatly simplifies the tasks of upgrading the LAN for catering to increasing bandwidth demands.

    Robust Layer 2 Features
    The SGS-6340-24T4S can be programmed for basic switch management functions such as port speed configuration, port aggregation, VLAN, Spanning Tree Protocol, WRR, bandwidth control and IGMP snooping. The SGS-6340-24T4S provides 802.1Q tagged VLAN, Q-in-Q, voice VLAN and GVRP Protocol. The VLAN groups allowed to be on the SGS-6340-24T4S will be maximally up to 256. By supporting port aggregation, the SGS-6340-24T4S allows the operation of a high-speed trunk combined with multiple ports. It enables up to 128 groups for trunking with a maximum of 8 ports for each group.

    Excellent Traffic Control
    The SGS-6340-24T4S is loaded with powerful traffic management and WRR features to enhance services offered by telecoms. The WRR functionalities include wire-speed Layer 4 traffic classifiers and bandwidth limitation which are particularly useful for multi-tenant unit, multi-business unit, Telco, or network service applications. It also empowers the enterprises to take full advantage of the limited network resources and guarantees the best in VoIP and video conferencing transmission.Powerful Security
    The SGS-6340-24T4S supports ACL policies comprehensively. The traffic can be classified by source/destination IP addresses, source/destination MAC addresses, IP protocols, TCP/UDP, IP precedence, time ranges and ToS. Moreover, various policies can be conducted to forward the traffic. The SGS-6340-24T4S also provides IEEE 802.1x port based access authentication, which can be deployed with RADIUS, to ensure the port level security and block illegal users.

    Efficient Management
    The SGS-6340-24T4S supports IP stacking function that helps network managers to easily configure up to 24 switches in the same series via one single IP address instead of connecting and setting each unit one by one. For efficient management, the SGS-6340-24T4S Managed Gigabit Switch is equipped with console, Web and SNMP management interfaces. With its built-in Web-based management interface, the SGS-6340-24T4S offers an easy-to-use, platform-independent management and configuration facility. The SGS-6340-24T4S supports standard Simple Network Management Protocol (SNMP) and can be managed via any standard-based management software. For text-based management, the SGS-6340-24T4S can be accessed via Telnet and the console port. Moreover, the SGS-6340-24T4S offers secure remote management by supporting SSH connection which encrypts the packet content at each session.

    Flexibility and Extension Solution
    The four mini-GBIC slots built in the SGS-6340-24T4S are compatible with 1000BASE-X and WDM SFP (Small Form-factor Pluggable) fiber-optic modules. The distance can be extended from 550 meters (multi-mode fiber) to 10/50/70/120 kilometers (single-mode fiber or WDM fiber). They are well suited for applications within the enterprise data centers and distributions.

    Ordering Information
    SGS-6340-24T4S Layer 3 24-Port 10/100/1000T + 4-Port 1000X SFP Stackable Managed Switch


  • Server Farm Switch
    The SGS-6340-24T4S provides up to 28 Gigabit Ethernet ports for enterprises and network servers. It is ideal to be used as a server farm switch connecting to servers. With its port trunking function, an 8GB fat pipe is provided for connecting to the backbone if required.
    undefined
    Enterprise Security and QoS Edge Switch
    With the IEEE 802.1x network access authentication, the SGS-6340-24T4S provides the MAC/IP/Protocol Access Control list and Port Security functions which can limit the number of MAC addresses to be passed through one specific port. The IGMP snooping and QoS features in the SGS-6340-24T4S improve the network efficiency and protect the network clients.
    Layer 3 VLAN Routing
    With the built-in robust Layer 3 traffic routing protocols, the SGS-6340-24T4S ensures reliable routing between VLANs and network segments. The routing protocols can be applied via VLAN interface. The SGS-6340-24T4S is certainly a cost-effective and ideal solution for enterprises.
    Ordering Information
    SGS-6340-24T4S Layer 3 24-Port 10/100/1000T + 4-Port 1000X SFP Stackable Managed Switch


  • Hardware Specifications
    Copper Ports 24 10/100/1000BASE-T RJ45 auto-MDI/MDI-X ports
    SFP/mini-GBIC Slots 4 1000BASE-X SFP interfaces
    Console 1 x RJ45-to-RS232 serial port (9600, 8, N, 1)
    Switch Architecture Store-and-forward
    Switch Fabric 56Gbps/non-blocking
    Switch Throughput 41.66Mpps
    Address Table 16K MAC address table with auto learning function
    Shared Data Buffer 1.5MB
    Flow Control Back pressure for half-duplex
    IEEE 802.3x pause frame for full-duplex
    Jumbo Frame 9KB
    LED System:
    PWR, SYS
    Ports:
    10/100/1000T RJ45 Port: LNK/ACT
    1000X SFP slot: LNK/ACT
    Dimensions (W x D x H) 442 x 220 x 44 mm, 1U height
    Weight 2340g
    Power Consumption 19.2 watts/65.51 BTU (maximum)
    Power Requirements AC 100~240V, 50/60Hz
    Management Function
    System Configuration Console, Telnet, SSH, Web browser, SNMP v1, v2c and v3
    Management Supports both IPv4 and IPv6 addressing
    Supports the user IP security inspection for IPv4/IPv6 SNMP
    Supports MIB and TRAP
    Supports IPv4/IPv6 FTP/TFTP
    Supports IPv4/IPv6 NTP
    Supports RMON 1, 2, 3, 9 four groups
    Supports the RADIUS authentication for IPv4/IPv6 Telnet user name and password
    Supports IPv4/IPv6 SSH
    The right configuration for users to adopt RADIUS server’s shell management
    Supports CLI, console, Telnet
    Supports SNMP v1, v2c and v3
    Supports Security IP safety net management function: avoid unlawful landing at nonrestrictive area
    Supports Syslog server for IPv4 and IPv6
    Supports TACACS+
    Layer 3 Function
    Routing Protocol Static routing, RIP and OSPF
    Routing Table 128
    Layer 2 Function
    Port Configuration Port disable/enable
    Auto-negotiation 10/100/1000Mbps full and half duplex mode selection
    Flow control disable/enable
    Bandwidth control on each port
    Port loopback detect
    Port Status Display each port’s speed duplex mode, link status, flow control status and
    auto negotiation status
    VLAN 802.1Q tagged based VLAN, up to 256 VLAN groups
    802.1ad Q-in-Q (VLAN stacking)
    GVRP for VLAN management
    Private VLAN Edge (PVE) supported
    Protocol-based VLAN
    MAC-based VLAN
    IP subnet VLAN
    Bandwidth Control TX/RX/both
    Link Aggregation IEEE 802.3ad LACP/static trunk
    Supports 128 groups with 8 ports per trunk group
    QoS 8 priority queues on all switch ports
    Supports strict priority and Weighted Round Robin (WRR) CoS policies
    Traffic classification:
    – IEEE 802.1p CoS/ToS
    – IPv4/IPv6 DSCP
    – Port-based WRR
    Multicast IGMP v1/v2/v3 snooping
    Querier mode support
    MLD v1/v2 snooping
    Multicast VLAN Register (MVR)
    Access Control List Supports Standard and Expanded ACL
    IP-based ACL/MAC-based ACL
    Time-based ACL
    Up to 512 entries
    Bandwidth Control At least 64Kbps step
    Security Supports MAC + port binding
    IPv4/IPv6 + MAC + port binding
    IPv4/IPv6 + port binding
    Supports MAC filter
    ARP scanning prevention
    Authentication IEEE 802.1x port-based network access control
    AAA authentication: TACACS+ and IPv4/IPv6 over RADIUS
    SNMP MIBs RFC 1213 MIB-II
    RFC 1215 Internet Engineering Task Force
    RFC 1271 RMON
    RFC 1354 IP-Forwarding MIB
    RFC 1493 Bridge MIB
    RFC 1643 Ether-like MIB
    RFC 1907 SNMP v2
    RFC 2011 IP/ICMP MIB
    RFC 2012 TCP MIB
    RFC 2013 UDP MIB
    RFC 2096 IP forward MIB
    RFC 2233 if MIB
    RFC 2452 TCP6 MIB
    RFC 2454 UDP6 MIB
    RFC 2465 IPv6 MIB
    RFC 2466 ICMP6 MIB
    RFC 2573 SNMP v3 notify
    RFC 2574 SNMP v3 vacm
    RFC 2674 Bridge MIB Extensions (IEEE 802.1Q MIB)
    RFC 2674 Bridge MIB Extensions (IEEE 802.1P MIB)
    Standard Conformance
    Regulatory Compliance FCC Part 15 Class A, CE
    Standards Compliance IEEE 802.3 10BASE-T
    IEEE 802.3u 100BASE-TX
    IEEE 802.3z Gigabit 1000BASE-SX/LX
    IEEE 802.3ab Gigabit 1000BASE-T
    IEEE 802.3x flow control and back pressure
    IEEE 802.3ad port trunk with LACP
    IEEE 802.1D Spanning Tree Protocol
    IEEE 802.1w Rapid Spanning Tree Protocol
    IEEE 802.1s Multiple Spanning Tree Protocol
    IEEE 802.1p Class of Service
    IEEE 802.1Q VLAN tagging
    IEEE 802.1X port authentication network control
    IEEE 802.1ab LLDP
    RFC 768 UDP
    RFC 793 TFTP
    RFC 791 IP
    RFC 792 ICMP
    RFC 2068 HTTP
    RFC 1112 IGMP v1
    RFC 2236 IGMP v2
    RFC 3376 IGMP v3
    RFC 2710 MLD v1
    FRC 3810 MLD v2
    RFC 2328 OSPF v2
    RFC 1058 RIP v1
    RFC 2453 RIP v2
    Environment
    Operating Temperature: 0 ~ 50 degrees C
    Relative Humidity: 5 ~ 90% (non-condensing)
    Storage Temperature: -10 ~ 70 degrees C
    Relative Humidity: 5 ~ 90% (non-condensing)
    Ordering Information
    SGS-6340-24T4S Layer 3 24-Port 10/100/1000T + 4-Port 1000X SFP Stackable Managed Switch

Facebooktwittergoogle_pluspinterestlinkedinyoutube

Comments are closed.