Planet

FNSW-2400PS

box_FNSW-2400PS
FNSW-2400PS
24-Port 10/100Mbps PoE Web Smart Ethernet Switch
4icon_poe 5icon_802_3af_mid 0icon_rstp 0icon_snmp 4icon_vlan 2icon_1GMP_Snooping


  • Cost-effective Edge Network Connection Solution
    To provide enhanced network management with cost saving benefit to customers, PLANET has released a new version of the FNSW-2400PS, the Layer 2 Web Smart Switch with PoE injector function. The FNSW-2400PS is equipped with 24 Fast Ethernet ports integrated with PoE injector function. With 125-watt PoE power budget, it provides a compact, affordable, safe and reliable power solution for small to medium enterprises.

    IEEE 802.3af Power over Ethernet Support
    The PoE in-line power following the IEEE 802.3af standard makes the FNSW-2400PS able to deliver power to 24 PoE compliant devices at the distance up to 100 meters through the 4-pair Cat 5/5e UTP wire. It optimizes the installation and safe power management of network devices such as wireless access points (AP), Voice over IP(VoIP) phones and IP surveillance cameras. With more efficient switching power supply, the efficiency of the FNSW-2400PS would be much better than four linear power adapters in the long run and offer customers the key benefit – energy saving.

    Easy Cabling Installation
    The Power over Ethernet technology enables the Ethernet wire to carry both data and power. Thus, the FNSW-2400PS reduces the need for cable installation and eliminates the need for extension cords or electrical outlets on the wall, ceiling or any unreachable place. In all, it lowers the installation costs and simplifies the deployment effort.

    Friendly Web-based Management
    For efficient management, the FNSW-2400PS is equipped with remote Web interface. It can be programmed for advanced switch management functions such as port configuration, VLAN, Rapid Spanning Tree Protocol (RSTP), IGMP Snooping, port trunk, QoS, bandwidth control, and MAC address / TCP & UDP filter. The FNSW-2400PS provides port-based / IEEE 802.1Q / MTU VLAN (port based / IEEE 802.1Q VLAN including overlapping). The VLAN groups allow the FNSW-2400PS to have a maximum of up to 24 port-based VLAN groups or up to 32 IEEE 802.1Q VLAN groups. On the other hand, the MTU VLAN divides port 1 to port 24 as separate LAN group. Via supporting port trunking, the FNSW-2400PS allows the operation of a high-speed trunk to combine multiple ports. The FNSW-2400PS also provides two groups of up to 4-Port 10/ 100Base-TX trunk support with up to 800Mbps bandwidth per trunk group.
    Ordering Information
    FNSW-2400PS 24-Port 10/100Mbps PoE Web Smart Ethernet Switch


  • Department / Workgroup PoE Switch
    With 24 10/100Mbps ports, the FNSW-2400PS provides a cost-effective and high-performance solution for power users. With its 4.8 Gigabits per second, non-blocking switch fabric, this device can easily provide a local, high bandwidth Fast Ethernet network for your departmental backbone. Providing up to 125 watts of PoE budget, in-line power interface, the FNSW-2400PS helps the administrator to flexibly build a power centrally-controlled IP phone system, IP camera system and AP group for the enterprise. For instance, 24 cameras or wireless APs can be installed around the corner in the company for surveillance or wireless roaming demands. Without the power-socket limitation, the FNSW-2400PS makes the installation of cameras and wireless LAN AP more efficient.
    Ordering Information
    FNSW-2400PS 24-Port 10/100Mbps PoE Web Smart Ethernet Switch


  • Hardware Specifications
    Ports 24 10/100Base-TX RJ-45 auto-MDI/MDI-X interfaces
    Switch Processing Scheme Store-and-Forward
    Throughput (packet per second) 3.57Mpps@64Bytes
    Switch Fabric 4.8Gbps
    Address Table 8K entries
    Share Data Buffer 1.75Mb embedded memory for packet buffers
    Flow Control Back pressure for half duplex, IEEE 802.3x pause Frame for full duplex
    Dimensions (W x D x H) 445 x 207 x 45 mm (1U height)
    Weight 2.55kg
    Power Requirements 100~240V AC, 50-60 Hz, 2A
    Power Consumption / Dissipation Max.135 watts / 460 BTU
    Smart Functions
    System Configuration Web interface, SNMP v1
    Port Configuration Port speed duplex mode selection
    Port Disable / Enable
    Bandwidth Control Yes
    Broadcast Storm Control Yes
    Port Statistics Display each port’s details about Ethernet traffic counter information
    VLAN 24 port-based VLAN groups / 32 IEEE 802.1Q VLAN groups / MTU VLAN
    Spanning Tree Protocol STP, IEEE 802.1D (Spanning Tree Protocol)
    RSTP, IEEE 802.1w (Rapid Spanning Tree Protocol)
    Port Trunking 2 groups of 4-port 10/ 100Base-TX trunk support, up to 800Mbps bandwidth per trunk group
    Port Mirroring Port mirroring allows monitoring of the traffic across any port in real time
    QoS Allows to assign low / high priority on each port
    First-In-First-Out, All-High-before-Low, Weight-Round-Robin QoS policy
    MAC Address / TCP & UDP Filter Yes
    IGMP Snooping v1 / v2 Allows to Disable or Enable
    Power over Ethernet
    PoE Standard IEEE 802.3af Power over Ethernet / PSE
    PoE Power Supply Type Mid-Span
    PoE Power output Per Port 48V DC, 350mA . Max. 15.4watts
    Power Pin Assignment 4/5(-), 7/8(+)
    PoE Power Budget 125 watts
    Standards Conformance
    Regulation Compliance FCC Part 15 Class A, CE
    Standards Compliance IEEE 802.3 Ethernet
    IEEE 802.3u Fast Ethernet
    IEEE 802.3af Power over Ethernet (15.4Watts)
    IEEE 802.3x full-duplex flow control
    IEEE 802.1Q VLAN
    IEEE 802.1p QoS
    IEEE 802.1D Spanning Tree Protocol
    IEEE 802.1w Rapid Spanning Tree Protocol
    Environment
    Temperature Operating: 0~50 degrees C
    Storage: -10~70 degrees C
    Humidity Operating: 5~95%
    Storage: 5~95% (non-condensing)
    Ordering Information
    FNSW-2400PS 24-Port 10/100Mbps PoE Web Smart Ethernet Switch

Facebooktwittergoogle_pluspinterestlinkedinyoutube

Comments are closed.